A record of accelerated erosion in the recent sediments of Blelham Tarn in the English Lake district

Two frozen cores from Blelham Tarn were subsampled and measured using mineral magnetic, loss-on-ignition (LOI), radiometric, granulometric and diatom analyses. A detailed chronology was established using varves, radioisotopes and diatoms. This has enabled an accurately dated reconstruction of sedimentation over the past forty years. Despite a large increase in lake productivity, evidence suggests that the observed exponential increase in sedimentation rates can be attributed to erosion within the catchment. The predominant sediment source has been identified as surface soil. A comparison between the trend of accelerated sedimentation and the record of increased sheep stocking density for the area within which the most of the catchment lies, as well as observations of contemporary surface processes within the catchment, both suggest that much of the recent erosion is a direct response to increased pressure from sheep grazing.     

Remote sensing techniques for landslide studies and hazard zonation in Europe

An inventory is presented of researches concerning the use of remote sensing for landslide studies and hazard zonation as mainly carried out in the countries belonging to the European Community. An overview is given of the applicability of remote sensing in the following phases of landslide studies:

1. (1) Detection and classification of landslides. Special emphasis is given to the types of imagery required at different scales of analysis.

2. (2) Monitoring the activity of existing landslides using G.P.S., photogrammetrical techniques and radar interferometry.

3. (3) Analysis and prediction in space and time of slope failures. The different factors required in a landslide hazard study are evaluated, and the optimum remote sensing imagery for obtaining each of these factors is indicated.

Examples are given of research work carried out in these three phases from EC countries. Finally an evaluation is given of the aspects of uncertainty associated with the use of remote sensing data, and conclusions are given as to the incorporation of remote sensing techniques within the overall framework of techniques.     

Palaeoecology and Archaeology of the Kärlich–Seeufer Open-Air Site (Middle Pleistocene) in the Central Rhineland, Germany

The Kärlich–Seeufer archaeological site in Germany's central Rhineland was excavated between 1980 and 1992. The site provides evidence for hominid activity during a Middle Pleistocene interglaciation known up to now only from the Kärlich clay pit and therefore defined as the Kärlich Interglaciation, which is considered to be post-Cromer IV and pre-Holstein (sensu stricto) in age. The site is characterized by Acheulean artifacts, a fauna dominated byElephas (Palaeoloxodon) antiquus,and a unique and outstanding preservation of wooden and other palaeobotanical remains. Assuming all finds are associated, the site previously was interpreted as an elephant hunting camp with a wooden structure, together with wood and bone implements preservedin situ.Recent analysis of the same features has shown that the site can also be interpreted as a reworked archaeological sample. Hominid occupation occurred in the vicinity of a small lake with prevailing meso-oligotrophic conditions. Expanding boreal forests and fen vegetation characterized the landscape.     

The identifiability of parameters in a water quality model of the Biebrza River, Poland

The identifiability of model parameters of a steady state water quality model of the Biebrza River and the resulting variation in model results was examined by applying the Monte Carlo method which combines calibration, identifiability analysis, uncertainty analysis, and sensitivity analysis. The water quality model simulates the steady state concentration profiles of chloride, phosphate, ammonium, and nitrate as a function of distance along a river. The water quality model with the best combination of parameter values simulates the observed concentrations very well. However, the range of possible modelled concentrations obtained for other more or less equally eligible combinations of parameter values is rather wide. This range in model outcomes reflects possible errors in the model parameters. Discrepancies between the range in model outcomes and the validation data set are only caused by errors in model structure, or (measurement) errors in boundary conditions or input variables. In this sense the validation procedure is a test of model capability, where the effects of calibration errors are filtered out. It is concluded that, despite some slight deviations between model outcome and observations, the model is successful in simulating the spatial pattern of nutrient concentrations in the Biebrza River.     

Detecting lateral resistivity inhomogeneities with the Schlumberger array

A method of detecting lateral resistivity inhomogeneities with a multi-electrode cable for the Schlumberger array is presented. Using such a cable system, two dipole-dipole soundings are gathered in addition to the Schlumberger sounding at each point. Offset differences calculated from the dipole-dipole data give qualitative information about lateral resistivity inhomogeneities. Results from 1D modelling can give quantitative information about the 2D resistivity distribution since the dipole-dipole soundings are made to either side of the Schlumberger sounding point. Examples from two different locations in Norway are shown. At Reinøya, northern Norway, a dipping layer, confirmed by refraction seismic data, was identified. In a sedimentary basin with a contamination plume at Haslemoen, southern Norway, the method has revealed lateral variations in resistivity. In both cases, the Schlumberger soundings could be fitted with a 1D resistivity model.     

Numerical Studies with a Regional Atmospheric Climate Model Based on Changes in the Roughness Length for Momentum and Heat Over Antarctica

A regional atmospheric climate model is used toexamine the effect of changes in the roughnesslengths of momentum (_z0m) and heat (_z0h)on the structure of the lower atmosphere and on thesurface energy fluxes over Antarctica. Fourexperiments were carried out in which _z0mand/or _z0h were altered with respect to acontrol experiment. The changes consisted of (1) alowering of _z0m from a field aggregated froma vegetation map with an orographic correction basedon the European Centre for Medium-Range WeatherForecasts _z0m field, to a constant value of10^-3 m; and (2) a lowering of _z0h from a valueequal to _z0m to a constant value of 10^-3 mor a value dependent on the wind speed via a surfacerenewal model. A reduction of _z0m results in theexpected increase in near-surface wind speed. It alsoresults in an increase in the depth of the layer in whichsouth-easterly near-surface winds prevail, and in adecrease in the strength of the large-scale flow overthe continent, in particular in summer. In theescarpment region a decrease of _z0m is foundto result in too high wind speeds. Surface temperatureson average decrease while atmospheric temperaturesincrease, resulting in an increase of near-surfacestatic stability. Changes in roughness lengths donot significantly change the temperature profiles.The surface fluxes, on average found reduced, aremodelled best by using the _z0h based on thesurface renewal method.     

Use of microtremor measurement for assessing site effects in Northern Belgium – interpretation of the observed intensity during the MS = 5.0 June 11 1938 earthquake

To provide quantitative information on site effects in the northern part of Belgium, forty-seven H/V microtremor measurements were performed with 5 second seismometers over an area of about 15.000 km². Most of the results show a northward regular increase of the fundamental period in agreement with the augmentation of the Mesozoic and Cainozoic soft sedimentsthickness from a few meters 40 km south of Brussels to 900 m at the Netherlands-Belgium border. The measured resonance frequency values wereconsistent with theoretical computations performed at different sites onthe basis of existing information and shallow seismic experiments. At oneparticular site (Uccle) where borehole data were available, microtremor measurements using an array of four seismological stations with differentapertures allowed to obtain the low frequency part of the Rayleigh wave dispersion curve, extending the range covered by the analysis of surfacewaves artificially generated. The Vs profile derived from the surface waveinversion corroborates the 1 Hz natural frequency of the site. Comparison of these results with the macroseismic information concerning the M_S = 5.0 1938 earthquake which occurred 50 km west of Brussels,confirmed the hypothesis that the geological structure of the Brabant massifis likely to control damage distribution during such an earthquake. Comparisonbetween the intensity map of the 1938 earthquake and the resonance period ofsediments obtained by our microtremor study shows a clear relation betweenthe two parameters. During the 1938 earthquake, site effects played a prominent role due to the dimension of the source whose corner frequency wasabout 1 Hz.     

Gravity reduction with three-dimensional atmospheric pressure data for precise ground gravity measurements

The redistribution of air masses induces gravity variations (atmospheric pressure effect) up to about 20 μgal. These variations are disturbing signals in gravity records and they must be removed very carefully for detecting weak gravity signals. In the past, different methods have been developed for modelling of the atmospheric pressure effect. These methods use local or two-dimensional (2D) surface atmospheric pressure data and a standard height-dependent air density distribution. The atmospheric pressure effect is consisting of the elastic deformation and attraction term. The deformation term can be well modelled with 2D surface atmospheric pressure data, for instance with the Green's function method. For modelling of the attraction term, three-dimensional (3D) data are required. Results with 2D data are insufficient.From European Centre for Medium-Range Weather Forecasts (ECMWF) 3D atmospheric pressure data are now available. The ECMWF data used here are characterised by a spacing of Δ and Δλ = 0.5°, 60 pressure levels up to a height of 60 km and an interval of 6 h. These data are used for modelling of the atmospheric attraction term. Two attraction models have been developed based on the point mass attraction of air segments and the gravity potential of the air masses. The modelling shows a surface pressure-independent part of gravity variations induced by mass redistribution of the atmosphere in the order of some μgal. This part can only be determined by using 3D atmospheric pressure data. It has been calculated for the Vienna Superconducting Gravimeter site.From this follows that the gravity reduction can be improved by applying the 3D atmospheric attraction model for analysing long-periodic tidal waves including the polar tide. The same improvement is expected for reduction of long-term absolute gravity measurements or comparison of gravity measurements at different seasonal times. By using 3D atmospheric pressure data, the gravity correction can be improved up to some μgal.