利用卫星长波长地球物理位场对东亚地区深部结构的研究

有研究表明从中国北部经黄海、朝鲜半岛、日本海至日本本州岛存在一个大型断裂带,被称为“北纬40°断裂带”.为了验证该断裂带的存在性,本文通过GRACE和CHAMP卫星的位场数据中的大尺度区域重力和磁力异常来研究该区的大型构造特征.区域性研究范围为24°N~56°N,90°E~150°E,详细研究范围为32°N~42°N,122°E~132°E.2008年Taylor等利用CHAMP卫星2005年6月至12月收集的轨道数据,从测量数据中消除地核和外部产生磁场效应,经化磁极之后得到磁异常图,从中来追踪构造特征,并根据地质和地球物理资料建立了数学模型来进行解释.本文在此基础上,增加了GRACE卫星2003年10月份测量的重力异常场数据.实测差分位场数据利用高斯-勒让德求积法转换为垂向重力异常值,通过减去最新地球重力场模型（EGM96）的场值来去除波长超过1100 km的长波长异常,所得的重力异常数据和磁场数据进行比较.为了能从中得到研究区的共同构造特征,建立一个球面棱柱模型进行正演模拟、并进行重、磁异常场的波数相关性分析.研究发现在重、磁异常中均发现一个呈负相关的纬向构造特征,东亚地区“北纬40°断裂带”横穿了整个朝鲜半岛.     

Geophysical constraints on deep weathering and water storage potential in the Southern Sierra Critical Zone Observatory

The conversion of bedrock to regolith marks the inception of critical zone processes, but the factors that regulate it remain poorly understood. Although the thickness and degree of weathering of regolith are widely thought to be important regulators of the development of regolith and its water‐storage potential, the functional relationships between regolith properties and the processes that generate it remain poorly documented. This is due in part to the fact that regolith is difficult to characterize by direct observations over the broad scales needed for process‐based understanding of the critical zone. Here we use seismic refraction and resistivity imaging techniques to estimate variations in regolith thickness and porosity across a forested slope and swampy meadow in the Southern Sierra Critical Zone Observatory (SSCZO). Inferred seismic velocities and electrical resistivities image a weathering zone ranging in thickness from 10 to 35 m (average = 23 m) along one intensively studied transect. The inferred weathering zone consists of roughly equal thicknesses of saprolite (P‐velocity < 2 km s^?1) and moderately weathered bedrock (P‐velocity = 2–4 km s^?1). A minimum‐porosity model assuming dry pore space shows porosities as high as 50% near the surface, decreasing to near zero at the base of weathered rock. Physical properties of saprolite samples from hand augering and push cores are consistent with our rock physics model when variations in pore saturation are taken into account. Our results indicate that saprolite is a crucial reservoir of water, potentially storing an average of 3 m³ m^?2 of water along a forested slope in the headwaters of the SSCZO. When coupled with published erosion rates from cosmogenic nuclides, our geophysical estimates of weathering zone thickness imply regolith residence times on the order of 10⁵ years. Thus, soils at the surface today may integrate weathering over glacial–interglacial fluctuations in climate. Copyright © 2013 John Wiley & Sons, Ltd.     

Data reporting norms for 40Ar/39Ar geochronology

Data reported in ⁴⁰Ar/³⁹Ar geochronology studies are commonly insufficient to allow computation of ages. This deficiency renders it difficult to compare ages based on different standards or constants, and often hinders critical evaluation of the results. Herein are presented an enumeration of the data that should be reported in all ⁴⁰Ar/³⁹Ar studies, including a discussion in support of these requirements. The minimum required data are identified and distinguished from parameters that are useful but may be derived from them by calculation. Finally, recommendations are made for metadata needed to document age calculations (e.g., from age spectrum or isochron analyses).     

Evaluation of cosmogenic 3He and 21Ne production rates in olivine and pyroxene from two Pleistocene basalt flows,western Grand Canyon,AZ, USA

Combining cosmogenic ³He and ²¹Ne (³He_c and ²¹Ne_c) measurements on both pyroxene and olivine from the Pleistocene Bar Ten flows (85–107 ka) greatly increases our ability to evaluate the accuracy of ³He_c and ²¹Ne_c production rates and, therefore, ³He_c and ²¹Ne_c surface exposure ages. Comparison of ³He_c and ²¹Ne_c age-pairs yielded by experimentally determined production rates and composition-based model calculations indicates that the former give more accurate surface exposure ages than the latter in this study. However, experimental production rates should be adjusted to the composition of the minerals being analyzed to obtain the best agreement between ³He_c and ²¹Ne_c ages for any given sample. ²¹Ne_c/³He_c values are 0.400 ± 0.029 and 0.204 ± 0.014 for olivine and pyroxene, respectively, in Bar Ten lava flows, in agreement with previously published values, and indicate that ²¹Ne_c/³He_c in olivine and pyroxene is not affected by erosion and remains constant with latitude, elevation, and time (up to 10 Myr). Samples with ²¹Ne_c/³He_c that do not agree with these values may indicate the presence of non-cosmogenic helium and/or neon. The neon three-isotope diagram can also indicate whether or not all excess neon in mineral separates comes from cosmogenic sources. An error-weighted regression for olivine defines a spallation line [y = (1.033 ± 0.031)x + (0.09876 ± 0.00033)], which is indistinguishable from that for pyroxene (Schäfer et al., 1999). We have derived a production rate of 25 ± 8 at/g/yr for ²¹Ne_c in clinopyroxene (En_43–44) based on the ⁴⁰Ar/³⁹Ar age of the upper Bar Ten flow. Our study indicates that the production rate of ²¹Ne_c in olivine may be slightly higher than previously determined. Cosmogenic ³He and ²¹Ne remain extremely useful, particularly when paired, in determining accurate eruption ages of young olivine- and pyroxene-rich basaltic lava flows.     

Time-lapse seismic analysis of pressure depletion in the Southern Gas Basin

In the Southern Gas Basin (SGB) of the North Sea there are many mature gas fields where time‐lapse monitoring could be very beneficial in extending production life. However, the conditions are not immediately attractive for time‐lapse seismic assessment. This is primarily because the main production effect to be assessed is a pore pressure reduction and frame stiffening because of gas production in tight sandstone reservoirs that also have no real seismic direct hydrocarbon indicators. Modelling, based on laboratory measurements, has shown that such an effect would be small and difficult to detect in seismic data. This paper makes two main contributions. Firstly, this is, to our knowledge, the first time‐lapse study in the SGB and involves a real‐data assessment of the viability for detecting production in such an environment. Secondly, the feasibility of using markedly different legacies of data in such a study is addressed, including an assessment of the factors influencing the crossmatching. From the latter, it is found that significant, spatially varying time shifts need to be, and are successfully, resolved through 3‐D warping. After the warping, the primary factors limiting the crossmatching appear to be residual local phase variations, possibly induced by the differing migration strategies, structure, reverberations and different coherencies of the volumes, caused by differences in acquisition‐structure azimuth and acquisition fold. Despite these differences, a time‐lapse amplitude signature is observed that is attributable to production. The character of the 4‐D amplitude anomalies may also indicate variations in stress sensitivity, e.g. because of zones of fracturing. Additionally, warping‐derived time attributes have been highlighted as a potential additional avenue for detection of pressure depletion in such reservoirs. Although the effects are subtle, they may indicate changes in stress/pressure in and around the reservoir because of production. However, to fully resolve the subtle time‐lapse effects in such a reservoir, the data differences need to be better addressed, which may be possible by full re‐processing and pre‐stack analysis, but more likely dedicated 4‐D acquisition would be required.     

Differences between Mean Sea Levels for the Pacific,Atlantic and Indian Oceans From Topex/Poseidon Altimetry

Geopotential values W of the mean equipotential surfaces representing the mean ocean topography were computed on the basis of four years (1993 - 1996) TOPEX/POSEIDON altimeter data: W = 62 636 854.10m ² s ^–2 for the Pacific (P), W = 62 636 858.20m ² s ^–2 for the Atlantic (A), W = 62 636 856.28m ²s^–2 for the Indian (I) Oceans. The corresponding mean separations between the ocean levels were obtained as follows: A – P = – 42 cm, I– P = – 22 cm, I – A = 20 cm, the rms errors came out at about 0.3 cm. No sea surface topography model was used in the solution.     

Weighted sum method for calculating ground force: an evaluation by using a portable vibrator system

Using a lightweight portable vibrator, we have evaluated the accuracy of the 'weighted sum' method for calculating ground force. Experiments in which the vibrator was suspended elastically have shown that, contrary to expectations based on standard theory, the amplitude of the weighted sum ground force was significantly above zero at high frequencies (> 500 Hz). Complementary investigations with load cells confirmed these results. If not accounted for, these deviations may introduce significant 'vibroseis-correlation noise' in processed records. Furthermore, we have demonstrated that ground force and base-plate velocity can be used to estimate the radiation impedance, which describes the interaction of (vibratory) sources with the ground. Using the mechanical characteristics of the system (i.e. maximum displacement, maximum velocity and maximum acceleration of the base-plate) and the radiation impedance, the behaviour of the portable vibrator on typical Dutch soil types was evaluated. We found that for the same sweep, more high-frequency energy could be generated on hard grounds (e.g. concrete) characterized by a higher radiation impedance than on softer grounds (e.g. clay or sand). Knowledge of this behaviour may provide important information for use in data interpretation.     

Interpretation of shallow refraction seismic data by reflection/refraction tomography

A new algorithm for tomographic inversion of traveltimes of reflected and refracted seismic waves is developed. The inversion gives interface configurations and velocity distributions in layers. The important features of the algorithm are: (a) the inclusion of shot time delays in the list of unknown parameters; (b) the regularization is applied in such a way that the most probable model is characterized by the similarity of neighbouring interfaces. As the problem under consideration is non-linear, several iterations are necessary in order to obtain the final model. In the case of a very inexact initial model, a 'layer-by-layer' inversion strategy is recommended as a first inversion step. The inversion program is supplied with a user interface, thanks to which one can: (a) pick interactively and identify seismic traveltimes; (b) build and edit depth/velocity models; and (c) display calculated traveltime curves and compare them with picked traveltimes as well as with the original seismic sections. The efficiency of the inversion software developed is illustrated by a numerical example and a field example in which shallow seismic data are considered. Application to wide-aperture reflection/refraction profiling (WARRP) data is also possible.     

Constraining Holocene sea levels using U‐Th ages of phreatic overgrowths on speleothems from coastal caves in Mallorca (Western Mediterranean)

Phreatic overgrowths on speleothems (POS) are carbonate formations deposited at the water table of caves in unique karstic coastal settings having morphologies that can be directly related to sea level at the time of formation. The U‐Th ages of calcite and aragonite overgrowths collected from the modern water table in coastal caves on Mallorca (Cova de Cala Varques A and Cova des Pas de Vallgornera) were determined using high‐precision MC‐ICPMS techniques. U‐Th ages indicate that phreatic carbonate deposition occurred between ca 2·8 and at least 0·6 ka BP and are in accord with an archeologically estimated age of 3·7–3·0 ka BP for a drowned prehistoric construction at a depth of 1 m below current sea level in a cave from the same area. Speleothem δ¹³C and δ¹⁸O and chemical composition of cave pools provide supportive evidence that POS reflect mixing between seawater and brackish water table. Copyright © 2010 John Wiley & Sons, Ltd.     

Magnetic field measurements in India during the last two centuries

Summary The direction of the geomagnetic field has changed substantially less in India than in Europe since the end of the 18th century.Whereas the European geomagnetic time series indicate a tendency of secular variation from which a remarkable westward drift of the non-axial field can be deduced, in India the field direction seems to have remained more or less fixed over the last two centuries. The drift of the non-axial field seems to be very small, or even eastward.