Topex/Poseidon Altimetry and Dynamics of the Ocean-Atmosphere System

The T/P altimeter data 1993 – 1997 (cycles 11 – 194) has been analyzed with emphases on seasonal variations in sea surface topography (SST). The amplitude of the annual variations amounted to (5.9±0.3) mm when inverted barometer (IB) corrections were applied and (2.0±0.4) mm without any IB corrections. The amplitude of the semi-annual variations in SST was small with IB corrections applied: (0.6±0.3) mm. However, when no IB corrections were applied, it was (1.8±0.4) mm, i.e. the semiannual variations are at the same level as the annual variations with no IB corrections. The phase angle offset of the annual term has shifted by about 180° when IB correction was applied. The dynamics of the ocean-atmosphere system is discussed and it is concluded that it could, at least partly, be responsible for the above observed effects.     

Assessment of gully erosion rates through interviews and measurements: a case study from northern Ethiopia

Gullying has been widespread in the Ethiopian Highlands during the 20th century. It threatens the soil resource, lowers crop yields in intergully areas through enhanced drainage and desiccation, and aggravates flooding and reservoir siltation. Knowing the age and rates of gully development during the last few decades will help explain the reasons for current land degradation. In the absence of historical written or photographic documentation, the AGERTIM method (Assessment of Gully Erosion Rates Through Interviews and Measurements) has been developed. It comprises measurements of contemporary gully volumes, monitoring of gully evolution over several years and semi‐structured interview techniques. Gully erosion rates in the Dogu'a Tembien District, Tigray, Ethiopia, were estimated in three representative case‐study areas. In Dingilet, gullying started around 1965 after gradual environmental changes (removal of vegetation from cropland in the catchment and eucalyptus plantation in the valley bottom); rill‐like incisions grew into a gully, which increased rapidly in the drier period between 1977 and 1990. The estimated evolution of the total gully volume in the other areas show patterns similar to those of the Dingilet gully. Average gully erosion rate over the last 50 years is 6·2 t ha^?1 a^?1. Since 1995, no new gullies have developed in the study area. Area‐specific short‐term gully erosion rates are now on average 1·1 t ha^?1 a^?1. The successful application of the AGERTIM method requires an understanding of the geomorphology of the study area and an integration of the researchers with the rural society. It reveals that rapid gully development in the study area is some 50 years old and is mainly caused by human‐induced environmental degradation. Under the present‐day conditions of ‘normal’ rain and catchment‐wide soil and water conservation, gully erosion rates are decreasing. Copyright © 2006 John Wiley & Sons, Ltd.     

Time-lapse seismic analysis of pressure depletion in the Southern Gas Basin

In the Southern Gas Basin (SGB) of the North Sea there are many mature gas fields where time‐lapse monitoring could be very beneficial in extending production life. However, the conditions are not immediately attractive for time‐lapse seismic assessment. This is primarily because the main production effect to be assessed is a pore pressure reduction and frame stiffening because of gas production in tight sandstone reservoirs that also have no real seismic direct hydrocarbon indicators. Modelling, based on laboratory measurements, has shown that such an effect would be small and difficult to detect in seismic data. This paper makes two main contributions. Firstly, this is, to our knowledge, the first time‐lapse study in the SGB and involves a real‐data assessment of the viability for detecting production in such an environment. Secondly, the feasibility of using markedly different legacies of data in such a study is addressed, including an assessment of the factors influencing the crossmatching. From the latter, it is found that significant, spatially varying time shifts need to be, and are successfully, resolved through 3‐D warping. After the warping, the primary factors limiting the crossmatching appear to be residual local phase variations, possibly induced by the differing migration strategies, structure, reverberations and different coherencies of the volumes, caused by differences in acquisition‐structure azimuth and acquisition fold. Despite these differences, a time‐lapse amplitude signature is observed that is attributable to production. The character of the 4‐D amplitude anomalies may also indicate variations in stress sensitivity, e.g. because of zones of fracturing. Additionally, warping‐derived time attributes have been highlighted as a potential additional avenue for detection of pressure depletion in such reservoirs. Although the effects are subtle, they may indicate changes in stress/pressure in and around the reservoir because of production. However, to fully resolve the subtle time‐lapse effects in such a reservoir, the data differences need to be better addressed, which may be possible by full re‐processing and pre‐stack analysis, but more likely dedicated 4‐D acquisition would be required.     

Remotely sensed estimation of forest canopy density: A comparison of the performance of four methods

In recent years, a number of alternative methods have been proposed to predict forest canopy density from remotely sensed data. To date, however, it remains difficult to decide which method to use, since their relative performance has never been evaluated. In this study the performance of: (1) an artificial neural network, (2) a multiple linear regression, (3) the forest canopy density mapper and (4) a maximum likelihood classification method was compared for prediction of forest canopy density using a Landsat ETM+ image. Comparison of confusion matrices revealed that the regression model performed significantly worse than the three other methods. These results were based on a z-test for comparison of weighted kappa statistics, which is an appropriate statistic for analysis of ranked categories. About 89% of the variance of the observed canopy density was explained by the artificial neural networks, which outperformed the other three methods in this respect. Moreover, the artificial neural networks gave an unbiased prediction, while other methods systematically under or over predicted forest canopy density. The choice of biased method could have a high impact on canopy density inventories.     

Seismic Moment Tensor Resolution on a Local Scale: Simulated Rockburst and Mine-induced Seismic Events in the Kopanang Gold Mine, South Africa

Seismic records contain information about the effect of the source as well as the effect of wave propagation through the rock mass. The effect of wave propagation is usually not well known as only simplified models of geological structures are available. Therefore, the information about the source retrieved by inverting seismograms may include errors due to incomplete knowledge of the rock mass along the propagation path, which in turn cause a distortion in the calculated moment tensor (MT). The distortion of the MT on a local scale was observed by inverting records of a simulated rockburst conducted at the Kopanang gold mine in South Africa. A dominant isotropic component of the explosive characteristics was found from the inversion. The deviatoric components retrieved from the blast are spurious. A test of their stability indicated that they are not significant, assuming an uncertainty above 5% for velocities and 10% for attenuation within the homogeneous model available for the mine. Thus, the retrieval of the MT from records of local networks in mines using a homogeneous model of the rock mass seems to be feasible. However, the homogeneous model of the rock mass can only be applied to close stations, within a few kilometers of the source. The seismic records from distant stations were too complex to be modelled by a homogeneous rock mass. Records of six mine-induced seismic events recorded at the Kopanang gold mine were also inverted. A vertical linear dipole along the pressure (P) axis was found for three of the events, suggesting a pillar burst. The mechanism of two events contains an isotropic implosion together with a nearly vertical dip-slip, and seems to indicate a combination of a cavity collapse with a down dip-slip along a nearly vertical fault. One event corresponds to a dipole along the tensional (T) axis. However, it is vertical, thus its association with tensile faulting of the hangingwall is uncertain.     

Newly identified historical tornadoes in the Czech Republic from 16th to the 20th centuries

Tornadoes have occurred in the territory of the Czech Republic throughout history. Although their frequency and intensity are not as high as in the USA, they can cause severe damage as well. That is why a systematic effort to document individual occurrences of this dangerous meteorological phenomenon as far as possible back into the past began in the 1990s. The aim of this investigation is to extend the first European catalogue of tornadoes originally published by Wegener [Wegener A., 1917. Wind-und Wasserhosen in Europe], by the addition of these cases from the Czech Republic.This paper adds further to Setvák, Šálek and Munzar [Setvák M., Šálek M., Munzar J., 2003. Tornadoes within the Czech Republic—from medieval chronicles to the internet society. Atmos. Res. 67–68, 589–605], who reported the earliest documented tornado in the land of the Czech Republic which occurred in AD 1119 in Prague. In so doing, it presents recently discovered tornado cases from the 16th to the early 20th centuries, found in a variety of historical sources since the last ECSS conference held in Prague in 2002. In particular we will focus on the case from Jablonec nad Nisou (northern Bohemia) in 1925, which was probably the first case in the Czech Republic with accompanying photographic documentation of damage caused by a tornado.     

Elevated marine deposits in Bermuda record a late Quaternary megatsunami

Deposits of coral-bearing, marine shell conglomerate exposed at elevations higher than 20 m above present-day mean sea level (MSL) in Bermuda and the Bahamas have previously been interpreted as relict intertidal deposits formed during marine isotope stage (MIS) 11, ca. 360–420 ka before present. On the strength of this evidence, a sea level highstand more than 20 m higher than present-day MSL was inferred for the MIS 11 interglacial, despite a lack of clear supporting evidence in the oxygen-isotope records of deep-sea sediment cores. We have critically re-examined the elevated marine deposits in Bermuda, and find their geological setting, sedimentary relations, and microfaunal assemblages to be inconsistent with intertidal deposition over an extended period. Rather, these deposits, which comprise a poorly sorted mixture of reef, lagoon and shoreline sediments, appear to have been carried tens of meters inside karst caves, presumably by large waves, at some time earlier than ca. 310–360 ka before present (MIS 9–11). We hypothesize that these deposits are the result of a large tsunami during the mid-Pleistocene, in which Bermuda was impacted by a wave set that carried sediments from the surrounding reef platform and nearshore waters over the eolianite atoll. Likely causes for such a megatsunami are the flank collapse of an Atlantic island volcano, such as the roughly synchronous Julan or Orotava submarine landslides in the Canary Islands, or a giant submarine landslide on the Atlantic continental margin.     

Organic geochemistry and petrology of barren and Mo–Ni–PGE mineralized marine black shales of the Lower Cambrian Niutitang Formation (South China)

Marine black shales of the Lower Cambrian Niutitang Formation in southern China host Mo–Ni–platinum group elements (PGE) mineralization confined to a phosphate- and pyrite-rich stratiform body (max. 20-cm thick). The H/C atomic ratio, carbon isotopic composition, FTIR spectra of bulk organic matter, and spectra of extractable part of organic matter indicate similar sources and thermal evolution of organic matter in barren and mineralized black shales.The morphology and relative abundance of organic particles in barren and mineralized shales are different. In barren black shales, organic particles comprise only elongated bodies and laminae 2–10 μm across or elongated larger bodies (> 10 μm) with R_max = 2.96–5.21% (Type I particles). Mineralized black shales contain Type I particles in rock matrix (90–95 vol%), small veinlets or irregular organic accumulations (Type II particles, 1–5 vol%) that display weak to well developed mosaic texture and a variable reflectance (R_max = 3.55–8.65%), and small (< 1 to 5 μm) rounded or irregular Type III organic particles (1–4 vol%) distributed within phosphate nodules and sulphide rip-up clasts. Type III particles show similar reflectance as particles of Type I in rock matrix. Type I particles are interpreted as remnants of in situ bacterially reworked organic matter of cyanobacteria/algal type, Type II as solidified products or oil-derived material (migrabitumen), and Type III particles as remnants of original organic matter in phosphatized or sulphidized algal/microbial oncolite-like bodies. Equivalent vitrinite reflectances of Type I and III particles in barren and mineralized rocks are similar and correspond to semi-anthracite and anthracite. Micro-Raman spectra of organic particles in rocks display a wide belt in the area of 1600 cm^− 1 (G belt) and approximately the same belt in the area of 1350 cm^− 1 (D belt). The ratio of integrated areas of the two belts correlate with R_max values.The Mo–Ni–PGE mineralized body is interpreted as to represent a remnant of phosphate- and sulphide-rich subaquatic hardground supplied with organic material derived from plankton and benthic communities as well as with algal/microbial oncolite-like bodies that originated in wave-agitated, shallow-water, nearshore environment.     

基于高光谱遥感数据提取森林结构参数的研究

以位于三峡库区的龙门河森林自然保护区为研究区,综合利用线性光谱混合模型和几何光学模型,基于高光谱遥感数据提取森林结构参数是本文研究的重点。在研究区地面调查数据的基础上,通过高光谱数据和混合光谱分解法,获得反演几何光学模型所需的四分量参数,根据背景光照分量与森林植被冠层各参数间的关系,反演得到森林冠层郁闭度及平均冠幅的定量分布图,并利用37个野外实测样本进行结果验证。