Analysis of anomalies in ADS-B and its GPS data

Traditionally, the surveillance component of the air traffic management system has been based on radar, which consists of two separate systems: primary radar and secondary radar, which both enable the measurement of the aircraft range and bearing to the radar station. Primary radar is based on signals emitted by a ground station simply being reflected off an object and detected by a ground-based receiver. Secondary radar also emits signals, but relies upon a transponder onboard the aircraft to emit a signal itself, modulated among others by a four-digit aircraft identity (Mode A), aircraft altitude (Mode C) and/or 24-bit unique address (Mode S). Typical accuracies of secondary radar are of the order of 0.03 NM in range and 0.07° in azimuth. However, no position integrity report is provided. Air traffic density is expected to significantly increase in the future. In order to maintain or enhance air travel efficiency, while maintaining safety, more accurate surveillance systems, with the required integrity, will be required. Automatic dependent surveillance–broadcast (ADS-B) is a new aviation surveillance system, envisioned to overcome the limitations of radar and to enhance surveillance performance and thereby increase airspace capacity. However, its high dependence on external systems such as onboard navigation and communication systems also increases the number of potential points of failure. It is important to understand and mitigate these failure modes before the system can reliably be implemented. The present study emerged as an exploratory research as part of a safety assessment framework development for the ADS-B system. It reviews the ADS-B failure modes, data collection and analysis of ADS-B and its corresponding onboard GPS data. The study identifies a set of failures common to certain aircraft models, with consistent error patterns. A key failure mode was found to be associated with the navigation data from the onboard GPS. We discuss the identified failure modes and investigate the nature and causes of these failures. The findings highlight some of the deficiencies of the current ADS-B system, which will need to be addressed before the ADS-B system can reliably be implemented.     

An integrated land vehicle navigation system based on context awareness

In the complex urban environments, land vehicle navigation purely relying on GNSS cannot satisfy user needs due to the loss of satellite signals caused by obstructions such as buildings, tunnels, and trees. To solve this problem, we introduce a GPS-/MSINS-/magnetometer-integrated urban navigation system based on context awareness. In this system, the data from the Micro Strapdown Inertial Navigation System (MSINS) are used to analyze and detect the context knowledge of vehicles, whose sensor errors can be compensated by the heuristic drift reduction algorithm for different motion situations. When GPS is available, the vehicle position can be estimated by unscented Kalman Filter, whereas in the case of GPS outages, the vehicle attitude is provided by an attitude and heading reference system and the motion constraints-aided algorithm is used to complete the positioning. In the experiment validation, the integrated navigation system is set up by low-cost inertial sensors. The result shows that the proposed system can achieve high accuracy when GPS is available. For most of the time without GPS, the system can guarantee the positioning precision of 10 m and compensate the errors of MSINS effectively, which fully satisfies positioning needs in complex urban environments.     

Testing block subdivision algorithms on block designs

Integrated land use–transportation models predict future transportation demand taking into account how households and firms arrange themselves partly as a function of the transportation system. Recent integrated models require parcels as inputs and produce household and employment predictions at the parcel scale. Block subdivision algorithms automatically generate parcel patterns within blocks. Evaluating block subdivision algorithms is done by way of generating parcels and comparing them to those in a parcel database. Three block subdivision algorithms are evaluated on how closely they reproduce parcels of different block types found in a parcel database from Montreal, Canada. While the authors who developed each of the algorithms have evaluated them, they have used their own metrics and block types to evaluate their own algorithms. This makes it difficult to compare their strengths and weaknesses. The contribution of this paper is in resolving this difficulty with the aim of finding a better algorithm suited to subdividing each block type. The proposed hypothesis is that given the different approaches that block subdivision algorithms take, it’s likely that different algorithms are better adapted to subdividing different block types. To test this, a standardized block type classification is used that consists of mutually exclusive and comprehensive categories. A statistical method is used for finding a better algorithm and the probability it will perform well for a given block type. Results suggest the oriented bounding box algorithm performs better for warped non-uniform sites, as well as gridiron and fragmented uniform sites. It also produces more similar parcel areas and widths. The Generalized Parcel Divider 1 algorithm performs better for gridiron non-uniform sites. The Straight Skeleton algorithm performs better for loop and lollipop networks as well as fragmented non-uniform and warped uniform sites. It also produces more similar parcel shapes and patterns.     

Exploring the spatially varying innovation capacity of the US counties in the framework of Griliches’ knowledge production function: a mixed GWR approach

Griliches’ knowledge production function has been increasingly adopted at the regional level where location-specific conditions drive the spatial differences in knowledge creation dynamics. However, the large majority of such studies rely on a traditional regression approach that assumes spatially homogenous marginal effects of knowledge input factors. This paper extends the authors’ previous work (Kang and Dall’erba in Int Reg Sci Rev, 2015. doi: 10.1177/0160017615572888) to investigate the spatial heterogeneity in the marginal effects by using nonparametric local modeling approaches such as geographically weighted regression (GWR) and mixed GWR with two distinct samples of the US Metropolitan Statistical Area (MSA) and non-MSA counties. The results indicate a high degree of spatial heterogeneity in the marginal effects of the knowledge input variables, more specifically for the local and distant spillovers of private knowledge measured across MSA counties. On the other hand, local academic knowledge spillovers are found to display spatially homogenous elasticities in both MSA and non-MSA counties. Our results highlight the strengths and weaknesses of each county’s innovation capacity and suggest policy implications for regional innovation strategies.     

Geographical impacts on social networks from perspectives of space and place: an empirical study using mobile phone data

Space and place are two fundamental concepts in geography. Geographical factors have long been known as drivers of many aspects of people’s social networks. But whether and how space and place affect social networks differently are still unclear. The widespread use of location-aware devices provides a novel source for distinguishing the mechanisms of their impacts on social networks. Using mobile phone data, this paper explores the effects of space and place on social networks. From the perspective of space, we confirm the distance decay effect in social networks, based on a comparison between synthetic social ties generated by a null model and actual social ties derived from real-world data. From the perspective of place, we introduce several measures to evaluate interactions between individuals and inspect the trio relationship including distance, spatio-temporal co-occurrence, and social ties. We found that people’s interaction is a more important factor than spatial proximity, indicating that the spatial factor has a stronger impact on social networks in place compared to that in space. Furthermore, we verify the hypothesis that interactions play an important role in strengthening friendships.     

Spatial representation in the social interaction potential metric: an analysis of scale and parameter sensitivity

The social interaction potential (SIP) metric measures urban structural constraints on social interaction opportunities of a metropolitan region based on the time geographic concept of joint accessibility. Previous implementations of the metric used an interaction surface based on census tracts and the locations of their centroids. This has been shown to be a shortcoming, as the metric strongly depends on the scale of the zoning system in the region, making it difficult to compare the SIP metric between metropolitan regions. This research explores the role of spatial representation in the SIP metric and identifies a suitable grid-based representation that allows for comparison between regions while retaining cost-effectiveness with respect to computational burden. We also report on findings from an extensive sensitivity analysis investigating the SIP metric’s input parameters such as a travel flow congestion factor and the length of the allowable time budget for social activities. The results provide new insights on the role of the modifiable areal unit problem in the computation of time geographic measures of accessibility.     

Risk Prediction of Tunnel Water or Mud Inrush Based on Disaster Forewarning Grading

Water or mud inrush can not only hamper the normal construction of tunnel, but also cause severe casualties and property losses. Through the cause analysis and statistical theory, a total of 9 predictors based on 3 factors, the engineering geology, hydrogeology and construction, were put forward to control the happening of water or mud inrush. Based on the classification principles of forewarning, 3 alert levels, red, orange and yellow, were established. Using the AHP–TOPSIS evaluation theory, the risk prediction model of water or mud inrush was built based on the classification of disaster forewarning. The model was used in the diversion project of Fujian Long Jin–xi and achieved good effects.     

Experimental Evaluation of Construction Waste and Ground Granulated Blast Furnace Slag as Alternative Soil Stabilisers

In this study, the effect of ground granulated blast furnace slag (GGBFS) and recycled construction waste (CW) on bentonite clay stabilisation were investigated. The unconfined compressive strength (UCS) of specimens was evaluated with different combinations of GGBFS and CW over various curing periods. A series of micro analysis tests consisting of scanning electron microscope, energy dispersive spectrometer and X-ray diffraction were also conducted to determine the microstructural arrangement and mineralogical effect of the stabilisation treatment. The UCS results showed an increment in strength after introduction of GGBFS and CW and the longer curing period produced more pronounced results. The optimum additive ratio was calculated as 5 % of slag and 20 % of construction waste under all curing conditions. The micro analytical results also indicated formation of structural bonds between admixtures and bentonite in stabilised specimens, as slag crystals and bentonite particles were observed to occupy the cavities and vesicles on the construction waste grains. However, the experimental data shows that the strength improvement is not significant with the addition of only construction waste.     

Laboratory Estimation of Rock Joint Stiffness and Frictional Parameters

Numerical modeling of complex rock engineering problems involves the use of various input parameters which control usefulness of the output results. Hence, it is of utmost importance to select the right range of input physical and mechanical parameters based on laboratory or field estimation, and engineering judgment. Joint normal and shear stiffnesses are two popular input parameters to describe discontinuities in rock, which do not have specific guidelines for their estimation in literature. This study attempts to provide simple methods to estimate joint normal and shear stiffnesses in the laboratory using the uniaxial compression and small-scale direct shear tests. Samples have been prepared using rocks procured from different depths, geographical locations and formations. The study uses a mixture of relatively smooth natural joints and saw-cut joints in the various rock samples tested. The results indicate acceptable levels of uncertainty in the calculation of the stiffness parameters and provide a database of good first estimates and empirical relations which can be used for calculating values for joint stiffnesses when laboratory estimation is not possible. Joint basic friction angles have also been estimated as by-products in the small scale direct shear tests.     

Investigation of Cycle Time Segments of Dragline Operation in Surface Coal Mine: A Statistical Approach

Dragline is highly capital intensive equipment to procure, operate and maintain in any surface mining operation. Given this, every second of operation of this capital intensive equipment is absolutely important. Improvement of even a single second in the total cycle time has a tremendous bearing on the overall performance of this equipment. In this light, the present paper is an endeavour to critically analyze the cycle time of dragline operations in a major surface coal mine in India. Rigorous statistical analysis has been performed on individual cycle time segments, of complete dragline cycle. The segmental cycle times have been found to be statistically significant and appear to be best represented by lognormal, normal and beta distributions. Furthermore, the mean time of the statistical distribution for segmental cycle time of dragline has revealed the dependence of cycle time on cut geometry and depth. Results have been illustrated in the form of figures, graphs and tables.