SIMD correlator library for GNSS software receivers

Software receivers have had a discernable impact on the GNSS research community. Often such receivers are implemented in a compiled programming language, such as C or C++. A software receiver must emulate the digital signal processing (DSP) algorithms executed on dedicated hardware in a traditional receiver. The DSP algorithms, most notably correlation, have a high computational cost; this burden precludes many software receivers from running in real time. However, the computational cost can be lessened by utilizing single instruction multiple data (SIMD) operations found on modern ×86 processors. The following demonstrates how C/C++ compatible code can be written to directly utilize the SIMD instructions. First, an analysis is carried out to demonstrate why real time operation is not possible when using traditional C/C++ code is carried out. Secondly a tutorial outlines how to write and insert ×86 assembly, with SIMD operations, into C/C++ code. Performance gains achieved via SIMD operations are then demonstrated, and pseudo code outlines how SIMD operations can be employed to perform correlation. Finally, a C/C++ compatible SIMD enabled arithmetic library is added to the GPS Toolbox for use in software receivers.     

Hydraulic analysis of cell-network treatment wetlands

When individual cells of a multiple-cell treatment wetland are hydraulically connected, the wetland has a cell-network structure. The hydraulic performance of treatment wetlands is often characterized using tracer residence time distributions (RTDs) measured between the wetland inlet and outlet, such that the wetland is considered as a single hydraulic unit, regardless of the extent of networking between individual internal cells. This work extends the single hydraulic unit approach to enable the specification of moments and RTD parameters for individual cells, or clusters of cells, within the cell-network based on inert tracer tests with injection only at the network inlet. Hydraulic performance is quantified in terms of hydraulic efficiency and travel time dimensionless variance using both the method of moments and RTD modeling. Cell-network analysis was applied to a case study from the Orlando Easterly Wetland (OEW), demonstrating the improvement in hydraulic performance of individual wetland cells following wetland restoration activities. Furthermore, cell-network analysis indicated that the location of water quality sampling station locations within the cell network can significantly affect the accuracy of pollutant removal effectiveness estimation when the individual sample station RTD does not represent the hydraulic unit RTD. At the OEW, it was determined that historical nutrient removal effectiveness estimation may be underestimated for one area and overestimated for another, and recommendations were provided for sample station locations to minimize future performance estimation errors.     

Simulation of a Stably Stratified Atmospheric Boundary Layer Using One-Dimensional Turbulence

One-dimensional turbulence (ODT) is a single-column simulation in which vertical motions are represented by an unsteady advective process, rather than their customary representation by a diffusive process. No space or time averaging of mesh-resolved motions is invoked. Molecular-transport scales can be resolved in ODT simulations of laboratory-scale flows, but this resolution of these scales is prohibitively expensive in ODT simulations of the atmospheric boundary layer (ABL), except possibly in small subregions of a non-uniform mesh.Here, two methods for ODT simulation of the ABL on uniform meshes are described and applied to the GABLS (GEWEX Atmospheric Boundary Layer Study; GEWEX is the Global Energy and Water Cycle Experiment) stable boundary-layer intercomparison case. One method involves resolution of the roughness scale using a fixed eddy viscosity to represent subgrid motions. The other method, which is implemented at lower spatial resolution, involves a variable eddy viscosity determined by the local mesh-resolved flow, as in multi-dimensional large-eddy simulation (LES). When run at typical LES resolution, it reproduces some of the key high-resolution results, but its fidelity is lower in some important respects. It is concluded that a more elaborate empirically based representation of the subgrid physics, closely analogous to closures currently employed in LES of the ABL, might improve its performance substantially, yielding a cost-effective ABL simulation tool. Prospects for further application of ODT to the ABL, including possible use of ODT as a near-surface subgrid closure framework for general circulation modeling, are assessed.     

Fate and groundwater impacts of produced water releases at OSPER “B” site,Osage County,Oklahoma

For the last 5 a, the authors have been investigating the transport, fate, natural attenuation and ecosystem impacts of inorganic and organic compounds in releases of produced water and associated hydrocarbons at the Osage-Skiatook Petroleum Environmental Research (OSPER) “A” and “B” sites, located in NE Oklahoma. Approximately 1.0 ha of land at OSPER “B”, located within the active Branstetter lease, is visibly affected by salt scarring, tree kills, soil salinization, and brine and petroleum contamination. Site “B” includes an active production tank battery and adjacent large brine pit, two injection well sites, one with an adjacent small pit, and an abandoned brine pit and tank battery site. Oil production in this lease started in 1938, and currently there are 10 wells that produce 0.2–0.5 m³/d (1–3 bbl/d) oil, and 8–16 m³/d (50–100 bbl/d) brine. Geochemical data from nearby oil wells show that the produced water source is a Na–Ca–Cl brine (∼150,000 mg/L TDS), with high Mg, but low SO₄ and dissolved organic concentrations. Groundwater impacts are being investigated by detailed chemical analyses of water from repeated sampling of 41 boreholes, 1–71 m deep. The most important results at OSPER “B” are: (1) significant amounts of produced water from the two active brine pits percolate into the surficial rocks and flow towards the adjacent Skiatook reservoir, but only minor amounts of liquid petroleum leave the brine pits; (2) produced-water brine and minor dissolved organics have penetrated the thick (3–7 m) shale and siltstone units resulting in the formation of three interconnected plumes of high-salinity water (5000–30,000 mg/L TDS) that extend towards the Skiatook reservoir from the two active and one abandoned brine pits; and (3) groundwater from the deep section of only one well, BR-01 located 330 m upslope and west of the site, appear not to be impacted by petroleum operations.     

Everyday effects, practices and causal mechanisms of ‘cultural embeddedness’: Learning from Utah’s high tech regional economy

In recent years, economic geographers have drawn extensively upon notions of ‘cultural embeddedness’ to explore how spatially variable sets of cultural conventions, norms, values and beliefs shape firms’ innovative performance in dynamic regional economies. However, our understanding of these causal links remains partial, reinforced by an ‘over-territorialised’ conception of cultural embeddedness which sidelines the role of institutional actors operating outside and across the boundaries of ‘the local’. So motivated, this paper offers a theoretically-informed - and theoretically informing - empirical analysis of the high tech regional economy in Salt Lake City, Utah to explore the everyday causal mechanisms, practices and processes - both local and extra-local - through which firms’ cultural embedding within the region is manifested, performed and (un)intentionally (re)produced. In so doing, this paper aims to further our understanding of the constitutive entanglement and complex interweaving of cultural/economic practices, and to contribute to the development of an in-depth empirical corpus of work which compliments the exciting conceptual developments that have largely dominated cultural economic geography over the last decade.     

The community morphology of skilled migration: the changing role of voluntary and community organisations (VCOs) in the grounding of British migrant identities in Paris (France)

Research into skilled migrant communities tends to emphasize the grounding of identities through transnationalism and mobility. Less research has been conducted into how skilled migrants actually ground their identities within the city through everyday social networks. The paper addresses this imbalance by examining the changing significance of British voluntary and community organisations (VCOs) in Paris, France. Combining qualitative and quantitative data, findings show local migrant networks to be important focal points for the British even though migrants’ lives may increasingly be transnational in orientation. The research also shows that in situ social networks are evolving. Specifically, traditional forms of elite expatriate communality are not as omnipotent as they once were, with the popularity of some high-profile British VCOs in Paris declining over recent decades. The paper argues that the link between social dynamism and communal morphology helps explain this shift: as British middle-class lifestyles have fragmented, and as the British migrant population in Paris has grown in scale and scope, so the range of VCOs and associated informal networks has grown. Whilst some skilled migrants still embed within traditional expatriate organisations, Britishness is increasingly grounded elsewhere; both within the city through alternative social networks, and located beyond the city through transnational ties.     

Paleoproterozoic gold deposits in the Bald Hill and Coyote areas, Western Tanami, Western Australia

Significant gold deposits in the western Tanami region of Western Australia include deposits in the Bald Hill and Coyote areas. The ca. 1,864 Ma Bald Hill sequence of turbiditic and mafic volcanic rocks hosts the Kookaburra and Sandpiper deposits and a number of smaller prospects. The ca. 1,835 Ma turbiditic Killi Killi Formation hosts the Coyote deposit and several nearby prospects. The Kookaburra deposit forms as a saddle reef within a syncline, and the Sandpiper deposit is localized within graphitic metasedimentary rocks along a limb of an anticline. Gold in these deposits is hosted by anastomosing quartz–(–pyrite–arsenopyrite) veins within quartz–sericite schist with disseminated arsenopyrite, pyrite, and marcasite (after pyrrhotite). Based on relative timing relationships with structural elements, the auriferous veins are interpreted to have been emplaced before or during the ca. 1,835–1,825 Ma Tanami Orogeny (regional D₁). Gold deposition is thought to have been caused by pressure drops associated with saddle reef formation (Kookaburra) and chemical reactions with graphitic rocks (Sandpiper). The Coyote deposit, the largest in the western Tanami region, consists of a number of ore lenses localized along the limbs of the Coyote Anticline, which formed during the Tanami Orogeny. The largest lenses are associated with the Gonzalez Fault, which is located along the steeply dipping southern limb of this fold. Gold was introduced at ca. 1,790 Ma into dilatant zones that formed in local perturbations along this fault during later reactivation (regional D₅) towards the end of a period of granite emplacement. Gold is associated with quartz–chlorite–pyrite–(arsenopyrite–galena–sphalerite) veins with narrow (<?5 mm) chloritic selvages. A quartz–muscovite–biotite–K–feldspar–(tourmaline–actinolite–arsenopyrite) assemblage, which is interpreted to relate to granite emplacement, overprints the regional greenschist facies metamorphic assemblage. The mineralogical similarity between this overprinting assemblage and the vein assemblage suggests that the auriferous veins at the Coyote deposit are associated with the granite-related metamorphic–metasomatic assemblage. Gold deposition is thought to have been caused by pressure drops within dilatant zones.