Observations of mine seismicity in the eastern Wasatch Plateau,Utah, U.S.A.: A possible case of implosional failure

In the summer of 1984, a three-dimensional, high-resolution microearthquake network was operated in the vicinity of two coal mines beneath Gentry Mountain in the eastern Wasatch Plateau, Utah. During a six-week period, approximately 3,000 seismic events were observed of which the majority were impulsive, higher frequency (>10 Hz), short duration (<2–3 sec) events probably associated with the caving of the roof from a longwall operation. In contrast, 234 of the largest located events appeared to occur predominantlybeneath the mines to a depth of 2 to 3 km consistent with previous studies. The magnitudes of these events ranged from less thanM _c 0 to 1.6. In addition to the unusual depths of these latter events, an anomalous aspect displayed by the events was an apparent dilatational focal mechanism suggesting a non-double-couple, possibly implosional source. Implosional events have been observed in other studies of mine seismicity; however, the generally inadequate instrumental coverage of the focal sphere has cast some doubt on the validity of such mechanisms. Previously suggested source mechanisms for such implosional events have included tensional failure through strata collapse, and a shear-implosional displacement mechanism. Shear failure must be involved in the failure process of the Gentry Mountain implosional events as evidenced by well-defined shear waves in the observed seismograms. Simultaneous monitoring in the East Mountain coal mining area to the south by the University of Utah revealed typical shear failure events mixed with implosional events. The observed double-couple, reverse focal mechanisms at East Mountain were similar to mechanisms determined in previous studies and a composite focal mechanism determined in this study for a sequence outside the mining areas. This suggested that the shear events within the mining areas are being influenced by the regional tectonic stress field. Thus in addition to the seismic events associated with caving of the roof from the longwall operation, there appear to be at least two other types of mining-induced seismic events occurring in the eastern Wasatch Plateau, both submine in origin: (1) events characterized by apparent non-double-couple possibly implosional focal mechanisms and well-defined shear waves; and (2) shear events, which are indistinguishable from tectonic earthquakes and may be considered mining triggered earthquakes. The small mining-induced stress changes that occur beyond a few hundred meters from the mine workings suggest both types of seismic events are occurring on critically stressed, pre-existing zones of weakness. Topography, overburden, method of mining, and mine configuration also appear to be significant factors influencing the occurrence of the implosional submine events.     

Fractal analysis of long-range paleoclimatic data: Oxygen isotope record of pacific core V28-239

R/S analysis of the oxygen isotope curve of Pacific core V28-239 yields a fractal dimension of 1.22. This value is considered to characterize global climatic change over the last 2 million years as expressed by changing O¹⁸ ratios and confirms that climatic variations are characterized by long-term persistence. The fractal dimension of 1.22 compares favorably with the approximate fractal dimension of 1.26 for annual precipitation records for nine major cities in the United States. Although the precipitation and oxygen isotope data are measured in different physical units and recorded at different time scales, fractal analysis allows for a mathematical comparison of the two phenomena. Additionally, since the fractal dimensions of the oxygen isotope and precipitation records are similar, it is implied that such fractal dimensions are characteristic of climate change over the spectral range of 10 to 10⁶ years. Given this temperature curves based on fractal parameters of long-term O¹⁸ data could be constructed which would allow examination of characteristics of temperature variation over tens and hundreds of years. Such studies may allow the establishment of limits on natural temperature variation and document the persistence of temperature trends through time. If these trends and limits can be resolved, long-range climatic prediction is feasible.     

Active tectonics of the Himalaya

The Himalayan mountains are a product of the collision between India and Eurasia which began in the Eocene. In the early stage of continental collision the development of a suture zone between two colliding plates took place. The continued convergence is accommodated along the suture zone and in the back-arc region. Further convergence results in intracrustal megathrust within the leading edge of the advancing Indian plate. In the Himalaya this stage is characterized by the intense uplift of the High Himalaya, the development of the Tibetan Plateau and the breaking-up of the central and eastern Asian continent. Although numerous models for the evolution of the Himalaya have been proposed, the available geological and geophysical data are consistent with an underthrusting model in which the Indian continental lithosphere underthrusts beneath the Himalaya and southern Tibet. Reflection profiles across the entire Himalaya and Tibet are needed to prove the existence of such underthrusting. Geodetic surveys across the High Himalaya are needed to determine the present state of the MCT as well as the rate of uplift and shortening within the Himalaya. Paleoseismicity studies are necessary to resolve the temporal and spatial patterns of major earthquake faulting along the segmented Himalayan mountains.     

31P solid-state nuclear magnetic resonance spectroscopy of aluminum phosphate minerals

This study examines the links between ³¹P solidstate NMR studies of aluminum phosphate minerals and their crystallographic structures. We found that ³¹P isotropic chemical shift values, _iso, carry little information about mineral structures. There seems to be no relation between the chemical shift anisotropy, =₃₃–₁₁ (₃₃>₂₂> ₁₁), and indicies of phosphate-tetrahedra distortion. ³¹P¹H heteronuclear magnetic dipole interactions, on the other hand, carry important information about hydrous phosphate mineral structures, information that should prove to be quite valuable in studies of phosphate adsorbed on mineral surfaces. This interaction can be measured through a variety of qualitative and quantitative experiments. It appears that spin diffusion is so rapid that subtle differences in hydrogen-bonding environments cannot be resolved.     

Si,Al ordering in leucite by high-resolution 27Al MAS NMR spectroscopy

High-resolution ²⁷Al MAS NMR spectra of natural leucite recorded at H ₀=11.7T contain three resolvable resonances at ²⁷Al δ _i = 69.2, 64.7, and 61.0±0.5 ppm. These three resonances are assigned to the three inequivalent framework positions of leucite: T3, T2, and T1, respectively. Fitting the observed spectra yields a Si,Al distribution for leucite in which approximately one-half of the Al is in T1 and one-quarter in each of T2 and T3. This Si,Al distribution differs substantially from those obtained by previous workers using ²⁹Si NMR spectroscopy and X-ray diffraction. New ²⁹Si NMR spectra and revision of previously reported ²⁹Si NMR peak assignments, however, make the ²⁷Al and ²⁹Si NMR results consistent. The ²⁷Al δ _i correlate linearly with the mean T-O-T′ bond angles of the average structure, which allows the peak assignments to be made. However, this correlation lies distinctly toward higher frequency and larger bond angles than correlations for Si,Al ordered aluminosilicates, suggesting that the mean T(Al)-O-T′(Si) bond angle for each site in leucite is smaller than the mean bond angle of the average structure, which is averaged over T(Al)-O-T′(Si) and T(Si)-OT′(Si,Al) angles.     

Amphipod predation by the infaunal polychaete,Nephtys incisa

Survival of the tubicolous amphipodAmpelisca abdita in a sediment toxicity test was negatively correlated with the presence of indigenousNephtys incisa. The gut contents ofN. incisa held in uncontaminated sediment included identifiable portions of the amphipods.A. abdita andMicrodeutopus gryllotalpa. Although most nephtyid polychaete worms are active predators,Nephtys incisa has been considered a nonselective deposit-feeder. We coclude thatN. incisa will prey upon amphipods under laboratory conditions. This predation may be a factor in the exclusion of surface-dwelling amphipods from theNephtys-Nucula community common in southern New England.     

Recent accretion in mangrove ecosystems based on137Cs and210Pb

Accretion rates were measured in fringe and basin mangrove forests in river and tidally dominated sites in Terminos Lagoon, Mexico, and a basin mangrove forest in Rookery Bay, Florida, USA. Accretion rates were determined using the radionuclides²¹⁰Pb and¹³⁷Cs. Consolidation-corrected accretion rates for the Rookery Bay cores, ranged from 1.4 to 1.7 mm yr^?1, with an average rate of 1.6 mm yr^?1. Rates at the Mexico sites ranged from 1.0 to 4.4 mm yr^?1, with an average of 2.4 mm yr^?1. Determination of rates in these mangrove forests was greatly affected by the consolidation corrections which decreased the apparent accretion rate by over 50% in one case. Accretion rates at basin sites compare favorably with a reported 1.4 to 1.6 mm yr^?1 rate of sea-level rise, indicating little or no subsidence at inland locations. Accretion rates in fringe sites are generally greater than basin sites, indicating greater subsidence rates in these sediments over longer time intervals.     

Two-dimensional kinematic and rheological modeling of the 1912 pyroclastic flow,Katmai, Alaska

Pyroclastic flow emplacement is strongly influenced by eruption column height. A surface along which kinetic energy is zero theoretically connects the loci of eruption column collapse with all coeval ignimbrite termini. This surface is reconstructed as a two-dimensional energy line for the 1912 Katmai pyroclastic flow in the Valley of Ten Thousand Smokes from mapped flow termini and the runup of the ignimbrite onto obstructions and through passes. Extrapolation of the energy line to the vicinity of the source vent at Novarupta suggests the eruption column which generated the ignimbrite eruption was approximately 425 m high. The 1912 pyroclastic flow travelled about 25 km downvalley. Empirical velocity data calculated from runup elevations and surveyed centrifugal superelevations indicate initial velocities near Novarupta were greater than 79–88 m s^–1. The flow progressively decelerated and was travelling only 2–8 m s^–1 when it crossed a moraine 16 km downvalley. The constant slope of the energy line away from Novarupta suggests the flow was systematically slowed by internal and basal friction. Using a simple physical model to calculate flow velocities and a constant kinetic friction coefficient (Heim coefficient) of 0.04 derived from the reconstructed energy line, the flow is estimated to have decelerated at an average rate of –0.16 m s^–2 and to have taken approximately 9.5 minutes to travel 25 km down the Valley of Ten Thousand Smokes. The shear strength of the flowing ignimbrite at the moraine was approximately 0.5 kPa, and its Bingham viscosity when it crossed the moraine was 3.5 × 10³ P. If the flow was Newtonian, its viscosity was 4.2 × 10³ P. Reynolds and Froude numbers at the moraine were only 41–62 and 0.84–1.04, respectively, indicating laminar, subcritical flow.     

Fluids in the lithosphere, 2. Experimental constraints on CO2 transport in dunite and quartzite at elevated P-T conditions with implications for mantle and crustal decarbonation processes

In a series of experiments at 0.5–1.3 GPa and 1050–1200°C we have monitored the transport, via crack propagation, of CO₂ into well-annealed olivine and quartz aggregates. The objectives were to determine (1) the extent and rate of fluid penetration; (2) the effect of varying both P-T conditions and microstructure; and (3) the fluid penetration pathways. Experiments on CO₂ penetration into dunite annealed in the absence of MgO indicate rapid and pervasive fluid transport on a grain-dimension scale, but a limited penetration distance ( 1 mm). Additional experiments on dunite annealed in the presence of MgO (either dispersed or present at both ends), however, resulted in CO₂ penetration that was both pervasive on the scale of individual grains and almost always completely through the 5 mm long samples. The abundance of fine (10 μm) grains in the MgO-free dunite, in contrast to the much larger grain sizes of the samples annealed with MgO present, suggests the difference in fluid penetration behavior may arise because the strength variation in dunite scales with the grain size. Effects arising from changes in olivine point defect chemistry, however, are an additional possibility. The response of synthetic quartzite to CO₂ overpressure is distinct from that of dunite: Quartzite experiences rapid and complete penetration of CO₂, via a macroscopically visible system of transgranular fractures, over the range of P-T conditions investigated.The small amount of porosity ( 2–3%) present in most rock samples fabricated for this study, lacks three-dimensional connectivity, thus precluding any enhanced fluid penetration via porous flow. Pores could possibly enhance fluid penetration as the result of a small reduction in resistance to fracture, but the probable abundance of strength-controlling flaws in natural rocks is likely to produce similar behavior.The results of our experiments on olivine and olivine + MgO suggest that the transport of pressurized CO₂ in very olivine-rich mantle environments will be pervasive on the scale of individual grains and its extent may be dependent on rock microstructure and/or crystal chemical effects. Such pervasive fluid transport, perhaps associated with magma decarbonation, may have interesting implications for both magma transport and local LREE enrichment of adjacent mantle wall-rock. The ease with which quartzite is penetrated by CO₂ at the conditions of our experiments underscores the possible role of decarbonation reactions in crustal permeability-enhancement processes.     

Seismic wave attenuation in fluid-saturated porous media

Contrary to the traditional view, seismic attenuation in Biot's theory of fluid-saturated porous media is due to viscous damping of local (not global) pore-fluid motion. Since substantial inhomogeneities in fluid permeability of porous geological materials are to be expected, the regions of highest local permeability contribute most to the wave energy dissipation while those of lowest permeability dominate the fluid flow rate if they are uniformly distributed. This dichotomy can explain some of the observed discrepancies between computed and measured attenuation of compressional and shear waves in porous earth. One unfortunate consequence of this result is the fact that measured seismic wave attenuation in fluid-filled geological materials cannot be used directly as a diagnostic of the global fluid-flow permeability.