A comparison of TRMM to other basin-scale estimates of rainfall during the 1999 Hurricane Floyd flood

The volumetric rainfall attributed to Hurricane Floyd in 1999 was computed for the bulk of the Tar, Neuse, and Cape Fear River Basins in eastern North Carolina, USA from the Tropical Rainfall Measuring Mission (TRMM) Multi-Satellite Precipitation Analysis (TMPA) research product, and compared with volumes computed using kriged gauge data and one centrally located radar. TMPA showed similar features in the band of heaviest rainfall with kriged and radar data, but was higher in the basin-scale integrations. Furthermore, Floyd’s direct runoff volumes were computed and divided by the volumetric rainfall estimates to give runoff coefficients for the three basins. The TMPA, having the larger storm totals, would suggest greater infiltration during Floyd than the gauge and radar estimates would. Finally, we discuss a concept for adjusting the United States Department of Agriculture Natural Resources Conservation Service rainfall-runoff model when predicting discharge values from real-time TMPA in ungauged river basins.

Inter-relationships of MnO2 precipitation, siderophore-Mn complex formation, siderophore degradation, and iron limitation in Mn-oxidizing bacterial cultures

To examine the pathways that form Mn^(III) and Mn^(IV) in the Mn^(II)-oxidizing bacterial strains Pseudomonas putida GB-1 and MnB1, and to test whether the siderophore pyoverdine (PVD) inhibits Mn^(IV)O₂ formation, cultures were subjected to various protocols at known concentrations of iron and PVD. Depending on growth conditions, P. putida produced one of two oxidized Mn species - either soluble PVD-Mn^(III) complex or insoluble Mn^(IV)O₂ minerals - but not both simultaneously. PVD-Mn^(III) was present, and MnO₂ precipitation was inhibited, both in iron-limited cultures that had synthesized 26-50 μM PVD and in iron-replete (non-PVD-producing) cultures that were supplemented with 10-550 μM purified PVD. PVD-Mn^(III) arose by predominantly ligand-mediated air oxidation of Mn^(II) in the presence of PVD, based on the following evidence: (a) yields and rates of this reaction were similar in sterile media and in cultures, and (b) GB-1 mutants deficient in enzymatic Mn oxidation produced PVD-Mn^(III) as efficiently as wild type. Only wild type, however, could degrade PVD-Mn^(III), a process linked to the production of both MnO₂ and an altered PVD with absorbance and fluorescence spectra markedly different from those of either PVD or PVD-Mn^(III). Two conditions, the presence of bioavailable iron and the absence of PVD at concentrations exceeding those of Mn, both had to be satisfied for MnO₂ to appear. These results suggest that P. putida cultures produce soluble Mn^(III) or MnO₂ by different and mutually inhibitory pathways: enzymatic catalysis yielding MnO₂ under iron sufficiency or PVD-promoted oxidation yielding PVD-Mn^(III) under iron limitation. Since PVD-producing Pseudomonas species are environmentally prevalent Mn oxidizers, these data predict influences of iron (via PVD-Mn^(III) versus MnO₂) on the global oxidation/reduction cycling of various pollutants, recalcitrant organic matter, and elements such as C, S, N, Cr, U, and Mn.     

Everyday effects, practices and causal mechanisms of ‘cultural embeddedness’: Learning from Utah’s high tech regional economy

In recent years, economic geographers have drawn extensively upon notions of ‘cultural embeddedness’ to explore how spatially variable sets of cultural conventions, norms, values and beliefs shape firms’ innovative performance in dynamic regional economies. However, our understanding of these causal links remains partial, reinforced by an ‘over-territorialised’ conception of cultural embeddedness which sidelines the role of institutional actors operating outside and across the boundaries of ‘the local’. So motivated, this paper offers a theoretically-informed - and theoretically informing - empirical analysis of the high tech regional economy in Salt Lake City, Utah to explore the everyday causal mechanisms, practices and processes - both local and extra-local - through which firms’ cultural embedding within the region is manifested, performed and (un)intentionally (re)produced. In so doing, this paper aims to further our understanding of the constitutive entanglement and complex interweaving of cultural/economic practices, and to contribute to the development of an in-depth empirical corpus of work which compliments the exciting conceptual developments that have largely dominated cultural economic geography over the last decade.     

The community morphology of skilled migration: the changing role of voluntary and community organisations (VCOs) in the grounding of British migrant identities in Paris (France)

Research into skilled migrant communities tends to emphasize the grounding of identities through transnationalism and mobility. Less research has been conducted into how skilled migrants actually ground their identities within the city through everyday social networks. The paper addresses this imbalance by examining the changing significance of British voluntary and community organisations (VCOs) in Paris, France. Combining qualitative and quantitative data, findings show local migrant networks to be important focal points for the British even though migrants’ lives may increasingly be transnational in orientation. The research also shows that in situ social networks are evolving. Specifically, traditional forms of elite expatriate communality are not as omnipotent as they once were, with the popularity of some high-profile British VCOs in Paris declining over recent decades. The paper argues that the link between social dynamism and communal morphology helps explain this shift: as British middle-class lifestyles have fragmented, and as the British migrant population in Paris has grown in scale and scope, so the range of VCOs and associated informal networks has grown. Whilst some skilled migrants still embed within traditional expatriate organisations, Britishness is increasingly grounded elsewhere; both within the city through alternative social networks, and located beyond the city through transnational ties.     

Fate and groundwater impacts of produced water releases at OSPER “B” site,Osage County,Oklahoma

For the last 5 a, the authors have been investigating the transport, fate, natural attenuation and ecosystem impacts of inorganic and organic compounds in releases of produced water and associated hydrocarbons at the Osage-Skiatook Petroleum Environmental Research (OSPER) “A” and “B” sites, located in NE Oklahoma. Approximately 1.0 ha of land at OSPER “B”, located within the active Branstetter lease, is visibly affected by salt scarring, tree kills, soil salinization, and brine and petroleum contamination. Site “B” includes an active production tank battery and adjacent large brine pit, two injection well sites, one with an adjacent small pit, and an abandoned brine pit and tank battery site. Oil production in this lease started in 1938, and currently there are 10 wells that produce 0.2–0.5 m³/d (1–3 bbl/d) oil, and 8–16 m³/d (50–100 bbl/d) brine. Geochemical data from nearby oil wells show that the produced water source is a Na–Ca–Cl brine (∼150,000 mg/L TDS), with high Mg, but low SO₄ and dissolved organic concentrations. Groundwater impacts are being investigated by detailed chemical analyses of water from repeated sampling of 41 boreholes, 1–71 m deep. The most important results at OSPER “B” are: (1) significant amounts of produced water from the two active brine pits percolate into the surficial rocks and flow towards the adjacent Skiatook reservoir, but only minor amounts of liquid petroleum leave the brine pits; (2) produced-water brine and minor dissolved organics have penetrated the thick (3–7 m) shale and siltstone units resulting in the formation of three interconnected plumes of high-salinity water (5000–30,000 mg/L TDS) that extend towards the Skiatook reservoir from the two active and one abandoned brine pits; and (3) groundwater from the deep section of only one well, BR-01 located 330 m upslope and west of the site, appear not to be impacted by petroleum operations.     

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.     

High-P (P = 1.5–1.8 GPa) blueschist from Elba: Implications for underthrusting and exhumation of continental units in the Northern Apennines

The Acquadolce Subunit on the Island of Elba, Italy, records blueschist facies metamorphism related to the Oligocene–early Miocene stages of continental collision in the Northern Apennines. The blueschist facies metamorphism is represented by glaucophane- and lawsonite-bearing metabasite associated with marble and calcschist. These rock types occur as lenses in a schistose complex representing foredeep deposits of early Oligocene age. Detailed petrological analyses on metabasic and metapelitic protoliths, involving mineral and bulk-rock chemistry coupled with P–T and P–T–X(Fe₂O₃) pseudosection modelling using PERPLE_X, show that the Acquadolce Subunit recorded nearly isothermal exhumation from peak pressure–temperature conditions of 1.5–1.8 GPa and 320–370°C. During exhumation, peak lawsonite- and possibly carpholite- or stilpnomelane-bearing assemblages were overprinted and partially obliterated by epidote-blueschist and, subsequently, albite-greenschist facies metamorphic assemblages. This study sheds new light on the tectonic evolution of Adria-derived metamorphic units in the Northern Apennines, by showing (a) the deep underthrusting of continental crust during continental collision and (b) rapid exhumation along ‘cold’ and nearly isothermal paths, compatible with syn-orogenic extrusion.     

Modelling temperature extremes in the Limpopo province: bivariate time-varying threshold excess approach

Natural Hazards - Aiming at the stability of a highway slope reinforced with anti-sliding piles, the mechanical behaviour of the inclined pile-soil arch in a soil slope reinforced with anti-sliding...     

Copper Isotopic Analysis in Geological and Biological Reference Materials by MC‐ICP‐MS

The characterisation of relative copper isotope amount ratios (δ⁶⁵Cu) helps constrain a variety of geochemical processes occurring in the geosphere, biosphere and hydrosphere. The accurate and precise determination of δ⁶⁵Cu in matrix reference materials is crucial in the effort to validate measurement methods. With the goal of expanding the number and variety of available geological and biological materials, we have characterised the δ⁶⁵Cu values of ten reference materials by MC‐ICP‐MS using C‐SSBIN model for mass bias correction. SGR‐1b (Green River shale), DOLT‐5 (dogfish liver), DORM‐4 (fish protein), TORT‐3 (lobster hepatopancreas), MESS‐4 (marine sediment) and PACS‐3 (marine sediment) have for the first time been characterised for δ⁶⁵Cu. Additionally, four reference materials (with published δ⁶⁵Cu values) have been characterised: BHVO‐1 (Hawaiian basalt), BIR‐1 (Icelandic basalt), W‐2a (diabase) and Seronorm? Trace Elements Serum L‐1 (human serum). The reference materials measured in this study possess complex and varied matrices with copper mass fractions ranging from 1.2 µg g^?1 to 497 µg g^?1 and δ⁶⁵Cu values ranging from ?0.20‰ to 0.52‰ with a mean expanded uncertainty of ± 0.07‰ (U, k = 2), covering much of the natural copper isotope variability observed in the environment.