Petrology of the Proterozoic Potato River Layered Intrusion, Northern Wisconsin, USA

The Potato River intrusion is a Keweenawan (1100 Ma) mafic plutonemplaced in Keweenawan volcanics and earlier Proterozoic metasedimentaryrocks along the southeastern flank of the Lake Superior syncline.It comprises the following lithostratigraphic zones: a thinto absent Border zone of altered olivine gabbro; a Lower zoneof olivine gabbro; a Picritic zone of picrite and troctolite;a Middle zone of olivine gabbro and leucogabbro; an Upper zoneof quartz leucogabbro and ferrogabbro; and a Roof zone of granophyricand granitic rocks. Fractional crystallization is evident fromcompositional changes in the rocks and cumulus minerals withstratigraphic height. Elements concentrated in the cumulus mineralsolivine and plagioclase (Mg, Fe²⁺, Al, Ca, Ni, Co, Cr, Sr) decreasewith height; elements concentrated in the trapped liquid (Na,K, La, Y, Zr, Nb, Rb, Ba) increase with height; and other elements(Ti, Fe³⁺, P, Ga, V, Sc, Cu, Zn) show complicated behavior relatedto the appearance of additional cumulus phases such as clinopyroxene,Fe-Ti oxides, and apatite. Lower zone rocks contain some sulfide,probably from sulfur derived from the country rock, and theUpper zone has sulfides probably precipitated from an immisciblesulfide liquid. The sulfide-bearing rocks have similaritiesto those of other intrusions, such as Bushveld, Stillwater,and Skaergaard. The picritic and troctolitic rocks of the Picritic zone indicatethat the intrusion was open to additional injections of maficmagma. Roof zone granophyric rocks are residual liquids intrudedalong the upper margin of the intrusion during regional tilting,but Roof zone granitic rocks are probably melted country rock.An attempt is made to estimate by reverse stratigraphic summationthe compositional path of the magma that solidified above thePicritic zone. The first compositions are highly aluminous,which suggests that the upper part of the intrusion has beenenriched in plagioclase by convection-aided crystal sorting.A complementary unit of mafic rocks is not exposed, but it couldbe present down dip. Some of the later compositions are similarto typical Keweenawan high-Al tholeiites. The magma did notundergo extreme iron enrichment, probably because of oxygenfugacity buffering.     

Reconstruction of palaeosalinity using carbon isotopes and benthic associations: a comparison

Carbon and oxygen isotopes were determined on 40 recrystallized shells of Late Jurassic bivalves from the Lusitanian Basin of Portugal. In contrast with the oxygen isotopes, which exhibited considerable diagenetic distortion, the carbon isotopes are thought to preserve a record of the salinity of the Jurassic marginal marine seas in which these bivalves lived. The reconstructed palaeosalinities range from 35%o (euhaline) to 5% (oligohaline). Comparing these values with the palaeosalinity reconstructed from a palaeoecological analysis of 17 stratigraphic levels within the basin, the independently derived values agree in most cases. Strongly differing values are explained as being due to biotic factors and to diagenetic distortion of the isotopic signal; they are less likely to be due to smallscale time-averaging or insufficient microstratigraphic sampling. On the whole, the carbon isotope analyses are thought to produce reasonable palaeosalinity values, although data from infaunal, originally aragonitic bivalves appear to be less reliable than those from epifaunal bivalves with a predominantly or exclusively calcitic shell. As diagenetic alteration of the carbon isotope signal is, however, unpredictable and biotic effects on the isotopic composition are insufficiently known, palaeosalinity reconstructions based on stable isotope data should be supported by palaeoecological data.     

Metadolerite age relationships in the Dalradian of northwest Donegal,Ireland and their orogenic significance

The structural relationships of several intrusive sheets belonging to the extensive metadolerite suite of the Appin (lower) Dalradian rocks of the Creeslough area, northwest Donegal, Ireland have been examined. It is concluded that, relative to the regional chronology of deformation of the enclosing metasediments, sheet emplacement has occurred: pre-D2; syn-D2; between D2 and D3; and syn-D3. The height of activity came in the post-D2, pre-D3 interval and coincided with the peak of regional metamorphism in the area. These relationships in Donegal are compared with those of the pretectonic basic rocks of the southwest Highlands and models are discussed.     

Space-time interaction amongst clusters of mining induced seismicity

Elementary cluster analysis of induced seismicity in a South African gold mine has shown that there is a clear interaction amongst the clusters; and that the level of the interaction is a function of the distance. The clusering algorithm used is an adaptation of the single-link cluster analysis which considers both three-dimensional space and time. A high level of interaction between the clusters is demonstrated from the cross-correlation analysis of seismic activity rates and radiated energy. A distinct decrease in the value of correlation coefficients was detectable as distance increased. This was somewhat surprising, considering the simplicity of the technique used. Since no attempt is made to study the physical mechanisms of interaction, these results are very preliminary, but interesting from an observational point of view.     

Experimental determination of the reaction dolomite + 2 coesite = diopside + 2 CO2 to 6 GPa

 The carbonation reaction CaMg(CO₃)₂ (dolomite)+2SiO₂ (coesite)=CaMgSi₂O₆ (diopside)+2 CO₂ (vapor) has been determined experimentally between 3.5 and 6 GPa in a multiple-anvil, solid-media apparatus. This reaction, a candidate for carbonation of eclogites (garnet+clinopyroxene) in the Earth’s mantle, lies at higher pressure for a given temperature than do the carbonation reactions for peridotites (olivine+orthopyroxene±clinopyroxene). A depth interval may exist within the Earth’s mantle under either ‘normal’ or ‘subduction’ thermal regimes where carbonated peridotite could coexist with carbonate-free, CO₂-bearing eclogite. Received: 25 May 1994/Accepted: 13 June 1995     

Seismic response of light internal equipment in base-isolated structures

The seismic response of light secondary systems in a building is dependent on the response of the primary structural system to the seismic ground motion with the result that very high accelerations can be induced in such secondary systems. This response can be reduced through the use of aseismic base isolation which is a design strategy whereby the entire building can be decoupled from the damaging horizontal components of seismic ground motion by the use of some form of isolation system. The paper presents a theoretical analysis of the response of light equipment in isolated structures and a parallel experimental programme both of which show that the use of base isolation can not only attenuate the response of the primary structural system but also reduce the response of secondary systems. Thus, the design of equipment and piping in a base-isolated building is very much simpler than that for a conventionally founded structure: inelastic response and equipment-structure interaction need not be considered and multiple support response analysis is rendered unnecessary. Although an isolation system with linear elastic bearings can reduce the acceleration of the structure, it may be accompanied by large relative displacements between the structure and the ground. A system using lead-rubber hysteretic bearings, having a force-displacement relation which is approximately a bilinear loop, can reduce these displacements. A parallel experimental programme was carried out to investigate the response of light equipment in structures isolated using lead-rubber bearings. The experimental results show that these bearings can dissipate energy and limit the displacement and acceleration of the structure but are less effective in reducing the accelerations in the internal equipment. The results of both the analysis and the tests show that base isolation is a very effective method for the seismic protection of light equipment items in buildings.     

The solubility of quartz in aqueous sodium chloride solution at 350°C and 180 to 500 bars

The solubility of quartz in 2, 3, and 4 molal NaCl was measured at 350°C and pressures ranging from 180 to 500 bars. The molal solubility in each of the salt solutions is greater than that in pure water throughout the measured pressure range, with the ratio of solubility in NaCl solution to solubility in pure water decreasing as pressure is increased. The measured solubilities are significantly higher than solubilities calculated using a simple model in which the water activity in NaCl solutions decreases either in proportion to decreasing vapor pressure of the solution as salinity is increased or in proportion to decreasing mole fraction of water in the solvent.     

MELTWATER FLUXES AT AN ARCTIC FOREST-TUNDRA SITE

Models of surface energy balance and snow metamorphism are utilized to predict the energy and meltwater fluxes at an Arctic site in the forest–tundra transition zone of north-western Canada. The surface energy balance during the melt period is modelled using an hourly bulk aerodynamic approach. Once a snowcover becomes patchy, advection from the bare patches to the snow-covered areas results in a large spatial variation in basin snowmelt. In order to illustrate the importance of small-scale, horizontal advection, a simple parameterization scheme using sensible heat fluxes from snow free areas was tested. This scheme estimates the maximum horizontal advection of sensible heat from the bare patches to the snow-covered areas. Calculated melt was routed through the measured snowcover in each landscape type using a variable flow path, meltwater percolation model. This allowed the determination of the spatial variability in the timing and magnitude of meltwater release for runoff. Model results indicate that the initial release of meltwater first occurred on the shallow upland tundra sites, but meltwater release did not occur until nearly two weeks later on the deep drift snowcovers. During these early periods of melt, not all meltwater is available for runoff. Instead, there is a period when some snowpacks are only partially contributing to runoff, and the spatial variation of runoff contribution corresponds to landscape type. Comparisons of melt with and without advection suggests that advection is an important process controlling the timing of basin snowmelt.