Uranium in spring water and bryophytes at basin creek in central idaho

Arkosic sandstones and conglomerates of Tertiary age beneath the Challis Volcanics of Eocene age at Basin Creek, 10 km northeast of Stanley, Idaho, contain uranium-bearing vitrainized carbon fragments. The economic potential of these sandstones and conglomerates is currently being assessed. Springs abound at the contacts of rock units, and water from these springs supports abundant growths of bryophytes (mosses and liverworts). Water from 22 springs and associated bryophytes were sampled; two springs were found to contain apparently anomalous concentrations (normalized) of uranium — as much as 6.5 μg/L (ppb) in water and 1800 μg/g (ppm) in ash of mosses. Moss samples from both springs also contained anomalous concentrations of arsenic, and one contained highly anomalous amounts of beryllium. Water from a third spring contained slightly anomalous amounts of uranium, and two species of mosses at the spring contained anomalous uranium (400 and 700 μg/g) and high levels of both cadmium and lead. Water from a fourth spring was normal for uranium (0.18 μg/L), but the moss from the water contained a moderate uranium level and highly anomalous concentrations of lead, germanium, and thallium.These results suggest that, in the Basin Creek area, moss sampling at springs may give a more reliable indication of uranium occurrence than would water sampling. The reason for this may be the ability of mosses to concentrate uranium and its associated pathfinder elements and to integrate uranium fluctuations that occur in the spring water over any period of time.     

The solubility of quartz in aqueous sodium chloride solution at 350°C and 180 to 500 bars

The solubility of quartz in 2, 3, and 4 molal NaCl was measured at 350°C and pressures ranging from 180 to 500 bars. The molal solubility in each of the salt solutions is greater than that in pure water throughout the measured pressure range, with the ratio of solubility in NaCl solution to solubility in pure water decreasing as pressure is increased. The measured solubilities are significantly higher than solubilities calculated using a simple model in which the water activity in NaCl solutions decreases either in proportion to decreasing vapor pressure of the solution as salinity is increased or in proportion to decreasing mole fraction of water in the solvent.     

Effects of finite rifting times on the development of sedimentary basins

Most thermo-mechanical models for the development of sedimentary basins have assumed that the rifting responsible for the formation of the basin occurred instantaneously and have examined the post-rift development of the basin. This assumption greatly simplifies the mathematical treatment, but is not in accord with what is found in nature, where 10-to 50-m.y. rifting events commonly accompany the formation of sedimentary basins and continental margins. The effects of a finite rifting time on the development of sedimentary basins are examined using an analytic technique which allows an arbitrary rifting history in both time and space and which considers the effects of both vertical and horizontal heat transfer. This technique allows the thermal structure of the lithosphere to be calculated throughout the rifting event and thus permits the subsidence history and surface heat flow of the developing basin to be traced.The effect of a finite-duration extension event is that heat is lost during rifting increasing the syn-rift subsidence at the expense of the post-rift. Lateral heat flow, which was not included in previous studies of the effect of finite rifting times, has a significant effect on the subsidence history, distribution of sediments and thermal history. In particular, the post-rift subsidence is decreased by more than 25% for a 20-m.y. rifting event and by more than 10–15% for a rifting event as short as 10 m.y. This will significantly decrease the subsidence rates in the post-rift stage and implies that inferences concerning the structure, development and thermal history of the basin derived from using “β-curves” to interpret backstripped subsidence can be greatly in error.Variations in syn-rift sediment accumulation and lithospheric thermal structure at the end of rifting resulting from different rifting histories can interact with other factors, such as the flexural response of the lithosphere to sediment loading, to affect the final width of the basin, the total amount of sediments that accumulate and the basin stratigraphy.     

Petrology of basalts from Loihi Seamount,Hawaii

Loihi Seamount is the southeasternmost active volcano of the Emperor-Hawaii linear volcanic chain. It comprises a spectrum of basalt compositional varieties including basanite, alkali basalt, transitional basalt and tholeiite. Samples from four dredge collections made on Scripps Institution of Oceanography Benthic Expedition in October 1982 are tholeiite. The samples include highly vesicular, olivine-rich basalt and dense glass-rich pillow fragments containing olivine and augite phenocrysts. Both quartz-normative and olivine-normative tholeiites are present. Minor and trace element data indicate relatively high abundances of low partition coefficient elements (e.g., Ti, K, P. Rb, Ba, Zr) and suggest that the samples were derived by relatively small to moderate extent of partial melting, of an undepleted mantle source. Olivine composition, MgO, Cr and Ni abundances, and Mg/(Mg+Fe), are typical of moderately fractionated to relatively unfractionated “primary” magmas. The variations in chemistry between samples cannot be adequately explained by low-pressure fractional crystallization but can be satisfied by minor variations in extent of melting if a homogeneous source is postulated. Alternatively, a heterogeneous source with variable abundances of certain trace elements, or mixing of liquids, may have been involved. Data for ³He/⁴He, presented in a separate paper, implies a mantle plume origin for the helium composition of the Loihi samples. There is little variation in the helium isotope ratio for samples having different compositions and textures. The helium data are not distinctive enough to unequivocally separate the magma sources for the tholeiitic rocks from the other rock types such as Loihi alkalic basalts and the whole source region for Loihi may have a nearly uniform helium compositions even though other element abundances may be variable. Complex petrologic processes including variable melting, fractional crystallization and magma mixing may have blurred original helium isotopic signatures.     

A friction damped base isolation system with fail-safe characteristics

An experimental study of a Coulomb friction damped aseismic base isolation system with fail-safe characteristics is described in this paper. The base isolation system utilized commercially made natural rubber bearings and a skid system which comes into operation at preset-levels of relative horizontal displacement between the structure and the foundation. The fail-safe skid provides hysteretic damping and prevents failure of the isolation system in the event of displacements larger than those assumed in the original design. The isolation system can be designed for an earthquake which can be reasonably expected within the lifetime of the structure; in the event of an earthquake of unanticipated intensity the failsafe system will prevent collapse of the structure. The testing of the system involved an 80,000lb model, approximately 1/3 scale to a real structure mounted on the 20′ × 20′ shaking table at EERC and subject to a variety of earthquake inputs. The results show that the hysteretic effect of the fail-safe system does not greatly increase the accelerations experienced by the structure but considerably reduces the relative displacements at the isolation bearings. The action of the fail-safe system was tested by using an earthquake input that produced a resonant response in the isolated mode of the model. The stability limit of the isolation system was exceeded and the bearings failed but complete failure of the isolation system and thus collapse of the model was prevented by the fail-safe system. The implementation of the system in full scale structures poses no technical or construction problems. An equivalent linearization technique was developed for this system for design purposes using response spectra. The accuracy of this approach was verified by comparison with the experimental results.     

Constitutive relations for fault slip and earthquake instabilities

Constitutive relations for fault slip are described and adopted as a basis for analyzing slip motion and its instability in the form of earthquakes on crustal faults. The constitutive relations discussed include simple rate-independent slip-weakening models, in which shear strength degrades with ongoing slip to a residual frictional strength, and also more realistic but as yet less extensively applied slip-rate and surface-state-dependent relations. For the latter the state of the surface is characterized by one or more variables that evolve with ongoing slip, seeking values consistent with the current slip rate. Models of crustal faults range from simple, single-degree-of-freedom spring-slider systems to more complex continuous systems that incorporate nonuniform slip and locked patches on faults of depth-dependent constitutive properties within elastic lithospheric plates that may be coupled to a viscoelastic asthenosphere. Most progress for the rate and state-dependent constitutive relations is at present limited to single-degree-of-freedom systems. Results for stable and unstable slip with the various constitutive models are summarized. Instability conditions are compared for spatially uniform versus nonuniform slip, including the elastic — brittle crack limit of the nonuniform mode. Inferences of constitutive and fracture parameters are discussed, based on earthquake data for large ruptures that begin with slip at depth, concentrating stress on locked regions within a brittle upper crust. Results of nonlinear stability theory, including regimes of complex sustained stress and slip rate oscillations, are outlined for rate and state-dependent constitutive relations, and the manner in which these allow phenomena like time-dependent failure, restrengthening in nearly stationary contact, and weakening in rapidly accelerated slip, is discussed.     

The seismicity of Kohistan, Pakistan: Source studies of the Hamran (1972.9.3), Darel (1981.9.12) and Patan (1974.12.28) earthquakes

Long period body waves are examined to show that the Hamran (1972.9.3), Darel (1981.9.12) and Patan (1974.12.28) earthquakes in Kohistan had focal depths of about 8–10 km. All involved high angle reverse faulting (thrusting) and had seismic moments of about 2.2 to 2.7·10²⁵ dyne cm. These shallow depths contrast with the deeper hypocentres found in the Hindu Kush and northeast Karakoram to the north and in Hazara to the south. The Hamran and Patan shocks were assigned depths of 45 km by the ISC, indicating that even well-recorded events in this region may have focal depths in error by 30 km     

Proterozoic seawater — felsic volcanics interaction W. Bergslagen,Sweden. Evidence for high REE mobility and implications for 1.8 Ga seawater compositions

Mg enrichment in diffusely bounded, schistose alteration zones occurring in Proterozoic submarine felsic volcanics NE of Hjulsjö, W. Bergslagen is shown to result from felsic rock-seawater interaction in a sub-seafloor hydrothermal system. The alteration is apparently in two stages, feldspar being altered first to a kaolinite-type clay which is then replaced by Mg-chlorite. Major and trace element data are presented for the schist and sheridanite (chlorite). Relative to the least altered felsic volcanics, and for negligible volume change, the schist shows strong addition of Mg and to a lesser extent Si; K, Al and Rb are apparently conserved, while most other elements are strongly depleted, including the REEs which are removed for ～75%, indicating a high degree of mobility. The chlorite, with its HREE enriched pattern, is considered to have equilibrated with the hydrothermal fluid, which consisted predominantly of seawater. Comparison with modern seawater leads to the tentative conclusion that the Proterozoic seawater HREE composition was not drastically different from that of modern seawater.