Reproductive biology of Mustelus lenticulatus from Kaikoura and Nelson

Mustelus lenticulatus is a non‐placental ovoviviparous shark with a gestation period of about 11 months. Young are born at a total length of 30–32 cm from September to December. Copulation, and ovulation of a further set of eggs, rapidly follows parturition. Fecundity increases with the length of the female; the most eggs found in one female was 24; the mean for all females was 10.73.

Males mature at about 85 cm total length and females at 95 cm at Kaikoura. Nelson males probably mature at a smaller size than do Kaikoura males. Nelson females mature at about 85 cm. Maximum observed lengths were 137 cm for females and 115 cm for males.     

Shear stress partitioning in large patches of roughness in the atmospheric inertial sublayer

Drag partition measurements were made in the atmospheric inertial sublayer for six roughness configurations made up of solid elements in staggered arrays of different roughness densities. The roughness was in the form of a patch within a large open area and in the shape of an equilateral triangle with 60 m long sides. Measurements were obtained of the total shear stress (τ) acting on the surfaces, the surface shear stress on the ground between the elements (τ_S) and the drag force on the elements for each roughness array. The measurements indicated that τ_S quickly reduced near the leading edge of the roughness compared with τ, and a τ_S minimum occurs at a normalized distance (x/h, where h is element height) of (downwind of the roughness leading edge is negative), then recovers to a relatively stable value. The location of the minimum appears to scale with element height and not roughness density. The force on the elements decreases exponentially with normalized downwind distance and this rate of change scales with the roughness density, with the rate of change increasing as roughness density increases. Average τ_S : τ values for the six roughness surfaces scale predictably as a function of roughness density and in accordance with a shear stress partitioning model. The shear stress partitioning model performed very well in predicting the amount of surface shear stress, given knowledge of the stated input parameters for these patches of roughness. As the shear stress partitioning relationship within the roughness appears to come into equilibrium faster for smaller roughness element sizes it would also appear the shear stress partitioning model can be applied with confidence for smaller patches of smaller roughness elements than those used in this experiment.     

Temporal and geochemical evolution of the Cenozoic intraplate volcanism of Zealandia

In order to constrain better the distribution, age, geochemistry and origin of widespread Cenozoic intraplate volcanism on Zealandia, the New Zealand micro-continent, we report new ⁴⁰Ar/³⁹Ar and geochemical (major and trace element and Sr–Nd–Hf–Pb isotope) data from offshore (Chatham Rise, Campbell and Challenger Plateaus) and onland (North, South, Auckland, Campbell, Chatham and Antipodes Islands of New Zealand) volcanism on Zealandia. The samples include nephelinite, basanite through phonolite, alkali basalt through trachyte/rhyolite, and minor tholeiite and basaltic andesite, all of which have ocean island basalt (OIB)-type trace element signatures and which range in age from 64.8 to 0.17 Ma. Isotope ratios show a wide range in composition (⁸⁷Sr/⁸⁶Sr = 0.7027–0.7050, ¹⁴³Nd/¹⁴⁴Nd = 0.5128–0.5131, ¹⁷⁷Hf/¹⁷⁶Hf = 0.2829–0.2831, ²⁰⁶Pb/²⁰⁴Pb = 18.62–20.67, ²⁰⁷Pb/²⁰⁴Pb = 15.54–15.72 and ²⁰⁸Pb/²⁰⁴Pb = 38.27–40.34) with samples plotting between mid-ocean-ridge basalts (MORB) and Cretaceous New Zealand intraplate volcanic rocks.Major characteristics of Zealandia's Cenozoic volcanism include longevity, irregular distribution and lack of age progressions in the direction of plate motion, or indeed any systematic temporal or spatial geochemical variations. We believe that these characteristics can be best explained in the context of lithospheric detachment, which causes upwelling and melting of the upper asthenospheric mantle and portions of the removed lithosphere. We propose that a large-scale seismic low-velocity anomaly, that stretches from beneath West Antarctica to Zealandia at a depth of > 600 km may represent a geochemical reservoir that has been in existence since the Cretaceous, and has been supplying the upper mantle beneath Zealandia with HIMU-type plume material throughout the Cenozoic. In addition, the sources of the Cenozoic intraplate volcanism may be at least partially derived through melting of locally detached Zealandia lower lithosphere.     

Sulfur cycling at the Mid-Atlantic Ridge: A multiple sulfur isotope approach

The role of sulfur in two hydrothermal vent systems, the Logatchev hydrothermal field at 14°45′N/44°58′W and several different vent sites along the southern Mid-Atlantic Ridge (SMAR) between 4°48′S and 9°33′S and between 12°22′W and 13°12′W, is examined by utilizing multiple sulfur isotope and sulfur concentration data. Isotope compositions for sulfide minerals and vent H₂S from different SMAR sites range from + 1.5 to + 8.9‰ in δ³⁴S and from + 0.001 to + 0.051‰ in Δ³³S. These data indicate mixing of mantle sulfur with sulfur from seawater sulfate. Combined δ³⁴S and Δ³³S systematics reveal that vent sulfide from SMAR is characterized by a sulfur contribution from seawater sulfate between 25 and 33%. This higher contribution, compared with EPR sulfide, indicates increased seawater sulfate reduction at MAR, because of a deeper seated magma chamber and longer fluid upflow path length, and points to fundamental differences with respect to subsurface structures and fluid evolution at slow and fast spreading mid-ocean ridges.Additionally, isotope data uncover non-equilibrium isotopic exchange between dissolved sulfide and sulfate in an anhydrite bearing zone below the vent systems at fluid temperatures between 335 and 400 °C. δ³⁴S values between + 0.2 to + 8.8‰ for dissolved and precipitated sulfide from Logatchev point to the same mixing process between mantle sulfur and sulfur from seawater sulfate as at SMAR. δ³⁴S values between ? 24.5 and + 6.5‰ and Δ³³S values between + 0.001 and + 0.125‰ for sulfide-bearing sediments and mafic/ultramafic host rocks from drill cores taken in the region of Logatchev indicate a clear contribution of biogenic sulfides formed via bacterial sulfate reduction. Basalts and basaltic glass from SMAR sites with Δ³³S = ? 0.008‰ reveal lower Δ³³S lower values than suggested on the basis of previously published isotopic measurements of terrestrial materials.We conclude that the combined use of both δ³⁴S and Δ³³S provides a more detailed picture of the sulfur cycling in hydrothermal systems at the Mid-Atlantic Ridge and uncovers systematic differences to hydrothermal sites at different mid-ocean ridge sites. Multiple sulfur isotope measurements allow identification of incomplete isotope exchange in addition to isotope mixing as a second important factor influencing the isotopic composition of dissolved sulfide during fluid upflow. Furthermore, based on Δ³³S we are able to clearly distinguish biogenic from hydrothermal sulfides in sediments even when δ³⁴S were identical.     

The effect of sulfur on the partitioning of Ni and other first-row transition elements between olivine and silicate melt

The effect of sulfur dissolved as sulfide (S²⁻) in silicate melts on the activity coefficients of NiO and some other oxides of divalent cations (Ca, Cr, Mn, Fe and Co) has been determined from olivine/melt partitioning experiments at 1400 °C in six melt compositions in the system CaO-MgO-Al₂O₃-SiO₂ (CMAS), and in derivatives of these compositions at 1370 °C, obtained from the six CMAS compositions by substituting Fe for Mg (FeCMAS). Amounts of S²⁻ were varied from zero to sulfide saturation, reaching 4100 μg g⁻¹ S in the most sulfur-rich silicate melt. The sulfide solubilities compare reasonably well with those predicted from the parameterization of the sulfide capacity of silicate melts at 1400 °C of O’Neill and Mavrogenes (2002), although in detail systematic deviations indicate that a more sophisticated model may improve the prediction of sulfide capacities.The results show a barely discernible effect of S²⁻ in the silicate melt on Fe, Co and Ni partition coefficients, and also surprisingly, a tiny but resolvable effect on Ca partitioning, but no detectable effect on Cr, Mn or some other lithophile incompatible elements (Sc, Ti, V, Y, Zr and Hf). Decreasing Mg# of olivine (reflecting increasing FeO in the system) has a significant influence on the partitioning of several of the divalent cations, particularly Ca and Ni. We find a remarkably systematic correlation between and the ionic radius of M²⁺, where M = Ca, Cr, Mn, Fe, Co or Ni, which is attributable to a simple relationship between size mismatch and excess free energies of mixing in Mg-rich olivine solid solutions.Neither the effect of S²⁻ nor of Mg#^ol is large enough by an order of magnitude to account for the reported variations of obtained from electron microprobe analyses of olivine/glass pairs from mid-ocean ridge basalts (MORBs). Comparing these MORB glass analyses with the Ni-MgO systematics of MORB from other studies in the literature, which were obtained using a variety of analytical techniques, shows that these electron microprobe analyses are anomalous. We suggest that the reported variation of with S content in MORB is an analytical artifact.Mass balance of melt and olivine compositions with the starting compositions shows that dissolved S²⁻ depresses the olivine liquidus of haplobasaltic silicate melts by 5.8 × 10⁻³ (±1.3 × 10⁻³) K per μg g⁻¹ of S²⁻, which is negligible in most contexts. We also present data for the partitioning of some incompatible trace elements (Sc, Ti, Y, Zr and Hf) between olivine and melt. The data for Sc and Y confirm previous results showing that and decrease with increasing SiO₂ content of the melt. Values of average 0.01 with most falling in the range 0.005-0.015. Zr and Hf are considerably more incompatible than Ti in olivine, with and about 10⁻³. The ratio / is well constrained at 0.611 ± 0.016.     

Evidence for distinct proportions of subducted oceanic crust and lithosphere in HIMU-type mantle beneath El Hierro and La Palma, Canary Islands

Shield-stage high-MgO alkalic lavas from La Palma and El Hierro (Canary Islands) have been characterized for their O-Sr-Nd-Os-Pb isotope compositions and major-, trace-, and highly siderophile-element (HSE: Os, Ir, Ru, Pt, Pd, Re) abundances. New data are also reported for associated evolved rocks, and entrained xenoliths. Clear differences in Pd/Ir and isotopic ratios for high Os (>50 ppt) lavas from El Hierro (δ¹⁸O_olivine = 5.17 ± 0.08‰; ⁸⁷Sr/⁸⁶Sr = 0.7029 to 0.7031; ε_Nd = +5.7 to +7.1; ¹⁸⁷Os/¹⁸⁸Os = 0.1481 to 0.1750; ²⁰⁶Pb/²⁰⁴Pb = 19.1 to 19.7; Pd/Ir = 6 ± 3) versus those from La Palma (δ¹⁸O_olivine = 4.87 ± 0.18‰; ⁸⁷Sr/⁸⁶Sr = 0.7031 to 0.7032; ε_Nd = +5.0 to +6.4; ¹⁸⁷Os/¹⁸⁸Os = 0.1421 to 0.1460; ²⁰⁶Pb/²⁰⁴Pb = 19.5 to 20.2; Pd/Ir = 11 ± 4) are revealed from the dataset.Crustal or lithospheric assimilation during magma transport cannot explain variations in isotopic ratios or element abundances of the lavas. Shallow-level crystal-liquid fractionation of olivine, clinopyroxene and associated early-crystallizing minerals (e.g., spinel and HSE-rich phases) controlled compatible element and HSE abundances; there is also evidence for sub-aerial degassing of rhenium. High-MgO lavas are enriched in light rare earth elements, Nb, Ta, U, Th, and depleted in K and Pb, relative to primitive mantle abundance estimates, typical of HIMU-type oceanic island basalts. Trace element abundances and ratios are consistent with low degrees (2-6%) of partial melting of an enriched mantle source, commencing in the garnet stability field (?110 km). Western Canary Island lavas were sulphur undersaturated with estimated parental melt HSE abundances (in ppb) of 0.07 ± 0.05 Os, 0.17 ± 0.16 Ir, 0.34 ± 0.32 Ru, 2.6 ± 2.5 Pt, 1.4 ± 1.2 Pd, 0.39 ± 0.30 Re. These estimates indicate that Canary Island alkali basalts have lower Os, Ir and Ru, but similar Pt, Pd and Re contents to Hawai’ian tholeiites.The HIMU affinities of the lavas, in conjunction with the low δ¹⁸O_olivine and high ²⁰⁶Pb/²⁰⁴Pb for La Palma, and elevated ¹⁸⁷Os/¹⁸⁸Os for El Hierro implies melting of different proportions of recycled oceanic crust and lithosphere. Our preferred model to explain isotopic differences between the islands is generation from peridotitic mantle metasomatised by <10% pyroxenite/eclogite made from variable portions of similar aged recycled oceanic crust and lithosphere. The correspondence of radiogenic ²⁰⁶Pb/²⁰⁴Pb, ¹⁸⁷Os/¹⁸⁸Os, elevated Re/Os and Pt/Os, and low-δ¹⁸O in western Canary Island lavas provides powerful support for recycled oceanic crust and lithosphere to generate the spectrum of HIMU-type ocean island basalt signatures. Persistence of geochemical heterogeneities throughout the stratigraphies of El Hierro and La Palma demonstrate long-term preservation of these recycled components in their mantle sources over relatively short-length scales (∼50 km).     

‘Unionising’ the new spaces of the new economy? Alternative labour organising in India’s IT Enabled Services-Business Process Outsourcing industry

This paper explores the lived experiences and aspirational social constructions of call centre work and employment in India’s high profile IT Enabled Services-Business Process Outsourcing (ITES-BPO) industry; the ways in which they differ from those previously documented amongst call centre workers in the Global North (specifically the UK); and the consequences of that geographical reconfiguration of offshored call centre work for the replicability in India of workplace collective bargaining strategies successfully developed in some UK call centres. These issues are analysed using new empirical evidence from a regional survey of 511 non-unionised ITES-BPO workers and 42 in-depth interviews in India’s National Capital Region. Based on this analysis, the paper then discusses the operation, outcomes and ongoing challenges faced by the newly formed ‘Union for ITES Professionals’ (UNITES Pro) in developing an alternative occupational organising model better suited to the particular needs, motivations and preferences of India’s young, mobile, call centre workers. The empirical analysis presented in the paper is located, therefore, within wider debates on the role of geographical context in shaping possibilities for organising white-collar service workers at different ends of global service chains in the new economy.     

Geochemical processes controlling arsenic mobility in groundwater: A case study of arsenic mobilization and natural attenuation

The behavior of As in the subsurface environment was examined along a transect of groundwater monitoring wells at a Superfund site, where enhanced reductive dechlorination (ERD) is being used for the remediation of groundwater contaminated with chlorinated solvents. The transect was installed parallel to the groundwater flow direction through the treatment area. The ERD technology involves the injection of organic C (OC) to stimulate in situ microbial dechlorination processes. A secondary effect of the ERD treatment at this site, however, is the mobilization of As, as well as Fe and Mn. The concentrations of these elements are low in groundwater collected upgradient of the ERD treatment area, indicating that, in the absence of the injected OC, the As that occurs naturally in the sediment is relatively immobile. Batch experiments conducted using sediments from the site inoculated with an Fe(III)- and As(V)-reducing bacterium and amended with lactate resulted in mobilization of As, Fe and Mn, suggesting that As mobilization in the field is due to microbial processes.     

Arsenic in an alkaline AMD treatment sludge: Characterization and stability under prolonged anoxic conditions

Lime treatment of acid mine drainage (AMD) generates large volumes of neutralization sludge that are often stored under water covers. The sludge consists mainly of calcite, gypsum and a widespread ferrihydrite-like Fe phase with several associated species of metal(loid) contaminants. The long-term stability of metal(loid)s in this chemically ill-defined material remains unknown. In this study, the stability and speciation of As in AMD sludge subjected to prolonged anoxic conditions is determined. The total As concentration in the sludge is 300 mg kg⁻¹. In the laboratory, three distinct water cover treatments were imposed on the sludge to induce different redox conditions (100%N₂, 100%N₂ + glucose, 95%N₂:5%H₂). These treatments were compared against a control of oxidized, water-saturated sludge. Electron micro-probe (EMP) analysis and spatially resolved synchrotron X-ray fluorescence (SXRF) results indicate that As is dominantly associated with Fe in the sludge. In all treatments and throughout the experiment, measured concentrations of dissolved As were less than 5 μg L⁻¹. Dissolved Mn concentration in the N₂ + glucose treatment increased significantly compared to other treatments. Manganese and As K-edge X-ray absorption near edge structure spectroscopy (XANES) analyses showed that Mn was the redox-active element in the solid-phase, while As was stable. Arsenic(V) was still the dominant species in all water-covered sludges after 9 months of anoxic treatments. In contrast, Mn(IV) in the original sludge was partially reduced into Mn(II) in all water-covered sludges. The effect was most pronounced in the N₂ + glucose treatment, suggesting microbial reduction. Micro-scale SXRF and XANES analysis of the treated sludge showed that Mn(II) accumulated in areas already enriched in Fe and As. Overall, the study shows that AMD sludges remain stable under prolonged anoxic conditions. External sources of chemical reductants or soluble C were needed to induce lower redox state in the systems, and even under these imposed treatments, only weakly reducing conditions (Mn threshold) developed. The results suggest that As(V) in AMD sludge will remain stable under prolonged anoxic conditions as long as Mn(IV) is present and organic matter accumulation is negligible.     

Geochemical and mineralogical evidence for Sahara and Sahel dust additions to Quaternary soils on Lanzarote,eastern Canary Islands,Spain

Africa is the most important source of dust in the world today, and dust storms are frequent on the nearby Canary Islands. Previous workers have inferred that the Sahara is the most important source of dust to Canary Islands soils, with little contribution from the Sahel region. Soils overlying a late Quaternary basalt flow on Lanzarote, Canary Islands, contain, in addition to volcanic minerals, quartz and mica, exotic to the island’s bedrock. Kaolinite in the soils also likely has an exotic origin. Trace‐element geochemistry shows that the soils are derived from varying proportions of locally derived basalt and African dust. Major‐element geochemistry, clay mineralogy and interpretation of satellite imagery suggest that dust additions to the Canary Islands come not only from the Sahara Desert, but also from the Sahel region.