HYDROLOGIC TEST SYSTEM FOR FRACTURE FLOW STUDIES IN CRYSTALLINE ROCK

Abstract. A hydrologic test system has been designed to measure the intrinsic permeabilities of individual fractures in crystalline rock. This report contains the design schematics and specifications necessary to build and/or modify this test system for other similar field applications. This system is used to conduct constant pressure/declining flow rate and pressure pulse hydraulic tests. The system is composed of four distinct units: (1) The Packer System, (2) Injection System, (3) Collection System, and (4) Electronic Data Acquisition System. The apparatus is built in modules so it can be easily transported and reassembled. It is also designed to operate over a wide range of pressures (0–300 psig) and flow rates (0.2–1.0 gal/min). This system has proved extremely effective and versatile in its use at the Climax Facility, Nevada Test Site.     

New average global P and PcP travel times

This paper deals with the construction procedure for regional travel-time curves and the new average global curve for P times. This paper also presents new average global values for PcP times constructed from observed travel times.     

Some elements of mathematical information theory and total inversion algorithm applied to travel time inversion

The total inversion algorithm and some elements of Mathematical Information Theory are used in the treatment of travel-time data belonging to a seismic refraction experiment from the southern segment (Sardinia Channel) of the European Geotraverse Project. The inversion algorithm allows us to improve a preliminary propagating model obtained by means of usual trial and error procedure and to quantify the resolution degree of parameters defining the crust and upper mantle of such a model. Concepts related to Mathematical Information Theory detect some seismic profiles of the refraction experiment which give the most homogeneous coverage of the model in terms of number of trajectories crossing it. Finally, the efficiency of the inversion procedure is quantified and the uncertainties regarding knowledge of different parts of the model are also evaluated.     

The Application of Petroleum Hydrocarbon Fingerprint Characterization in Site Investigation and Remediation

Tremendous resources have been and continue to be spent investigating and remediating petroleum hydrocarbon compounds (PHCs) in soil and ground water. Investigating and planning a remedial strategy for sites affected by PHCs is often a challenging task because of the complex chemical nature of the PHCs. the complex regulatory environment related to PHC cleanup, and the use of analytical methods that provide quantitation but not identification of PHCs. From a technical standpoint, the PHC impacting soil and/or ground water is frequently inadequately characterised, both in identification as well as in is general properties (solubility, toxicity). From a regulatory standpoint, promulgated or recommended total petroleum hydrocarbon (TPH) cleanup levels generally relate to assumed properties of specific unweathered products and are inconsistent among different agencies and regions. This produces a prime situation for unwillingly spending more resources on investigation or remediation than may be necessary, especially when the PHC in the subsurface has different properties from unweathered products such as gasoline or diesel.
Accurately identifying the PHC and its nature, a process known as fingerprint characterization, is critical to the determination of appropriate regulatory goals and design of cost-effective remedial approaches. This paper presents several case studies in which fingerprint characterization made a significant difference in the project outcome. In each instance the nature of the organic material was better understood, the regulatory cleanup levels were negotiated based on the nature of the material, and a remedial approach was implemented that differed significantly from and was generally less costly than what would have been required without fingerprint characterization data.     

剩磁-温度谱与冷却模式

本文解释热剩磁和粘滞剩磁的阻挡过程。较慢冷却伴随较低的阻挡温度。一组同一的磁颗粒,其实验室解阻温度不一定等于其磁化成分的阻挡温度。冷却速率不同,重排剩磁量会不同,两者的关系与磁畴状态有关。距烘烤体不同距离采集磁颗粒分布相同的围岩样品,在一定场合下,根据其剩磁-实验室解阻温度谱所示的重排剩磁量的差别,可讨论冷却速度及模型。本文列举苏格兰某些围岩的不同重排剩磁量,讨论有关问题。     

TRANSFORMATION OF TIME-DISTANCE CURVES OF DIVING WAVES INTO A MULTILAYERED MODEL*

A method to compute the parameters of a multilayered medium with dipping interfaces is described. The input data are time-distance curves of diving waves. The output data are the thickness of the layers, dips, and parameters characterizing the increase of velocity with depth. Three examples are presented.     

REMARQUES SUR L'INTERPRETATION DES SONDAGES DE POLARISATION PROVOQUEE ESSAI DE THEORIE QUANTITATIVE *

The transient phenomena associated with induced polarization are very complex and it is necessary to have both a proper understanding of the physical processes and a good supply of mathematical aids in order to make any advance in the quantitative interpretation of I.P. surveys. The analogy between the classical electrical sounding method and the induced polarization sounding method has led a number of workers to interpret the results of the latter like the results of the former. To clarify this idea, it seems very interesting to calculate a mathematical model in order to know the form of the anomaly that can be probably expected. The case of a thin horizontal polarizable layer, with the same uniform and isotropic conductibility as the homogeneous background, has been studied in this paper. The result of the calculation for the case of a single current electrode and a single potential electrode is given. From these data, the theoretical curve of IP sounding using the Wenner electrode array is computed. The master curve is compared with experimental curves obtained on scale models. A good correlation between these curves is noticed. In addition, it can be concluded that the mathematical model is proving the validity of the experiments on interpretation scale models.     

Spheroidal pyroxenite aggregates in the Bushveld Complex — a special case of silicate liquid immiscibility

Spherical aggregates of orthopyroxene are reported from some parts of the Bushveld Complex in a variety of host rocks.Detailed mapping has shown that these spherical aggregates, comprising pyroxenite spheroids in a quartz-norite matrix, are contact phenomena and not stratigraphic markers. Orthopyroxene, biotite and amphibole are enriched in spheroids relative to matrix; their mineral chemistry showing a fairly constant orthopyroxene and plagioclase composition through the spheroids and into the matrix, indicating in-situ formation.Bulk chemistry shows spheroid to matrix tie-lines orthogonal to those generally accepted for silicate liquid immiscibility, but other chemical information is consistent with the occurrence of immiscibility.The formation of the aggregates may be related to the industrial process of spherical agglomeration, by which spheroids are formed by the introduction of an immiscible “bridging liquid” to the melt — probably derived from the floor rocks in this case. The mechanism accounts for the field relationships, petrography and chemistry of the aggregate-matrix system. The petrology of the process equates with a special case of silicate liquid immiscibility induced by local contamination and ageing of the original magma.A similar “bridging liquid” mechanism could also account for the formation of the so-called “boulder bed” beneath the Merensky Reef.