Retrieval of stratospheric O3 and NO2 vertical profiles using zenith scattered light observations

Daily zenith scattered light intensity observations were carried out in the morning twilight hours using home-made UV-visible spectrometer over the tropical station Pune (18‡31′, 73‡51′) for the years 2000–2003. These observations are obtained in the spectral range 462–498 nm for the solar zenith angles (SZAs) varying from 87‡ to 91.5‡. An algorithm has been developed to retrieve vertical profiles of ozone (O₃) and nitrogen dioxide (NO₂) from ground-based measurements using the Chahine iteration method. This retrieval method has been checked using measured and recalculated slant column densities (SCDs) and they are found to be well matching. O₃ and NO₂ vertical profiles have been retrieved using a set of their air mass factors (AMFs) and SCDs measured over a range of 87–91.5‡ SZA during the morning. The vertical profiles obtained by this method are compared with Umkehr profiles and ozonesondes and they are found to be in good agreement. The bulk of the column density is found near layer 20–25 km. Daily total column densities (TCDs) of O₃ and NO₂ along with their stratospheric and tropospheric counterparts are derived using their vertical profiles for the period 2000–2003. The total column, stratospheric column and tropospheric column amounts of both trace gases are found to be maximum in summer and minimum in the winter season. Increasing trend is found in column density of NO₂ in stratospheric, tropospheric and surface layers, but no trend is observed in O₃ columns for above layers during the period 2000–2003     

Decarbonation reaction of magnesite in subducting slabs at the lower mantle

High-pressure and temperature experiments (28–62 GPa, and 1,490–2,000 K, corresponding to approximately 770–1,500 km depth in the mantle) have been conducted on a MgCO₃ + SiO₂ mixture using a laser-heated diamond anvil cell combined with analytical transmission electron microscope observation of the product phases to constrain the fate of carbonates carried on the subducting basalt into the lower mantle. At these conditions, the decarbonation reaction MgCO₃ (magnesite) + SiO₂ (stishovite) → MgSiO₃ (perovskite) + CO₂ (solid) has been recognized. This indicates that above reaction takes place as a candidate for decarbonation of the carbonated subducting mid ocean ridge basalts in the Earth’s lower mantle.     

Synchrotron IR study of hydrous ringwoodite (γ-Mg2SiO4) up to 30 GPa

High-pressure synchrotron infrared (IR) absorption spectra were collected between 650 and 4,000 cm⁻¹ at ambient temperature for hydrous Mg-ringwoodite (γ-Mg₂SiO₄) up to 30 GPa. The main feature in the OH⁻ stretching region is an extremely broad band centred at 3,150 cm⁻¹. The hydrogen bond is strong for most protons and the most probable site for protonation is the tetrahedral edge. With increasing pressure, this band shifts downward while decreasing its integrated intensity until disappearance at a pressure of 25 GPa. Only one band at 2,450 cm⁻¹ and an absorption plateau persist with a maximum wavenumber of 3,800 cm⁻¹. This behaviour is reversible upon pressure release. We interpret this as a second-order phase transition occurring in hydrated Mg-ringwoodite at high pressure (beyond ∼ 25 GPa). This result is compatible with the observation by Kleppe et al. (Phys Chem Miner 29:473–476, 2002a) who suggested the presence of Si–O–Si linkages and/or partial increase in the coordination of Si. Beyond the phase transition, the protons are delocalized and their environment on the ringwoodite structure is probably quite different from that at low pressure. Data obtained in situ at high pressures and temperatures are needed to better understand the effect of protonation on the structure and to better constrain this phase transition.     

Paleoproterozoic accretion in the Northeast Siberian craton: Isotopic dating of the Anabar collision system

Geochronological database considered in the work and characterizing the Anabar collision system in the Northeast Siberian craton includes coordinated results of Sm-Nd and Rb-Sr dating of samples from crustal xenoliths in kimberlites, deep drill holes, and bedrock outcrops. As is inferred, collision developed in three stages dated at 2200–2100, 1940–1760, and 1710–1630 Ma. The age of 2000–1960 Ma is established for substratum of mafic rocks, which probably originated during the lower crust interaction with asthenosphere due to the local collapse of the collision prism. Comparison of Sm-Nd and Rb-Sr isochron dates shows that the system cooling from ≈700 to ≈300°C lasted approximately 300 m.y. with a substantial lag relative to collision metamorphism and granite formation. It is assumed that accretion of the Siberian craton resulted in formation of a giant collision mountainous structure of the Himalayan type that was eroded by 1.65 Ga ago, when accumulation of gently dipping Meso-to Neoproterozoic (Riphean) platform cover commenced.     

Ammonium regeneration in intertidal sediments of the Yangtze estuary during air-exposure

The influences of exposure to the atmosphere on ammonium cycle in the intertidal surface sediments were in situ studied with a geochemical approach at a typical station in the Yangtze Estuary during three tidal cycles in September 2003. During an about 8-h emersion period of each diurnal tide, six high-resolution vertical profiles of adsorbed and dissolved ammonium were measured. It was observed that both adsorbed and dissolved ammonium generally had an increasing trend in sediment cores during the exposure. The rate of ammonium regeneration in sediments was estimated using the accumulation amount of ammonium including adsorbed and soluble fractions during the daytime emersion. The calculation result showed that there was relatively high ammonification rate (˜500 nmol N cm⁻³ day⁻¹), which reflected that organic nitrogen in sediments was quickly decomposed with a residence time of ˜52.7 days. Due to the dramatic temperature difference observed in sediment profiles, free convection was considered an important mechanism of regulating the efflux of produced ammonium into overlying waters. The total estimated amount of regenerated ammonium was ˜1.35×10⁵ t N year⁻¹ in the intertidal flat of the Yangtze Estuary, which occupied 7.6% of the total inorganic nitrogen annually transported to the estuarine ecosystem.     

Structural controls on Tertiary orogenic gold mineralization during initiation of a mountain belt, New Zealand

Two types of structurally controlled hydrothermal mineralization have occurred during folding of fissile schist in southern New Zealand: fold-related mineralization and normal fault-related mineralization. Both types have the same mineralogy and textures, and are dominated by quartz–ankerite veins and silicified breccias with ankeritic alteration. Most mineralized zones are thin (centimetre scale), although host schist is commonly impregnated with ankerite up to 20 m away. Thick (up to 5 m wide) mineralized zones are generally gold-bearing and contain pyrite and arsenopyrite with stibnite pods locally. Some of these auriferous zones have been extensively mined historically despite rugged topography and difficult access. Mineralization occurred during regional tectonic compression in the initial stages of development of the Southern Alps mountain belt at the Pacific–Australian plate boundary in the Miocene. Most of the gold-bearing deposits occur in east to south-east, striking normal faults that cut across mesoscopic folds in a belt that coincides with the southern termination of a regional-scale north trending antiform. Mineralized zones have similar structural control and relative timing to a nearby swarm of Miocene lamprophyre dykes and carbonatites. Limited stable isotopic data (C and O) and trace element geochemistry suggest that there was probably no genetic link between the igneous activity and gold mineralization. However, these two types of fluid flow have been controlled by the same tectonically created crustal plumbing system. This Miocene hydrothermal activity and gold deposition demonstrates that orogenic (mesothermal) mineralization can occur during the inception of an orogenic belt, not just in the latter stages as is commonly believed. These Miocene structures have been preserved in the orogen because the locus of uplift has moved northwards, so the early-formed gold deposits have not yet been structurally overprinted or eroded.     

Practical Research of IKONOS-2 Geopositioning and Its Accuracy in Tibet of China

This paper presents the studies of the refining of IKONOS-2 RPC, the transform of the datum, the mode of the control point distribution and the method of IKONOS stereo triangulation, so that IKONOS imagery can be used to collect the precise geospatial data and produce the large scale map. The transform between the IKONOS-2 image space and the national coordinate system based on the RPC have been developed, and the results of block adjustment with various control schemes in a practical project near Himalayas have been examined and analysed. The encouraging results of high positioning accuracy have been obtained.     

Relationship of Uncertainty and Line Segment for Between Polygon Segment Spatial Data in GIS

The mathematic theory for uncertainty model of line segment are summed up to achieve a general conception, and the line error hand model of εσ is a basic uncertainty model that can depict the line accuracy and quality efficiently while the model of εm and error entropy can be regarded as the supplement of it. The error band model will reflect and describe the influence of line uncertainty on polygon uncertainty. Therefore, the statistical characteristic of the line error is studied deeply by analyzing the probability that the line error falls into a certain range. Moreover, the theory accordance is achieved in the selecting the error buffer for line feature and the error indicator. The relationship of the accuracy of area for a polygon with the error loop for a polygon boundary is deduced and computed.