Spatial Variation in the Structure of Kelp Forest Communities Along a Wave Exposure Gradient

Abstract. Four sites were sampled in kelp (Macrocysiis pyrifera) forests occupying rocky bottom habitats along a wave exposure gradient in central California. Consistent betwecn-site differences were found in the three major structural elements - the surface canopy, the undcrstory assemblage, and the ground cover/turf assemblage - of kelp forest communities. Macrocysiis pyrifera was found at all four sites. Nereucyslis tuelkeana only at the most exposed site. The understory kelps Laminaria setchellii and Pterygopltora californica were also characteristic of exposed sites. Articulated coralline algae were more abundant at exposed sites than protected, while fleshy red algae showed the opposite pattern. All four study sites were located along 8.5 km of coastline, and thus were assumed to have available to them the same species pool for colonization. The substrate composition was the same and the amount of unconsolidated substrate was similar at all four sites. We suggest that exposure to wave-generated water motion, through its influence on the surface canopy and therefore on the amount of light reaching the bottom, is responsible for these between-site differences.     

Observations of natural fluorescence with an underwater radiometer

Measurements of subsurface irradiance spectra in the ocean consistently indicate intensities of long-wavelength visible light (589 nm) greater than could be derived from the penetration of sunlight. This can be attributed to natural fluorescence and/or to spectral crosstalk due to light leakage through the blocking filters of each discrete detector. A comparison of observed profiles with modelled contributions from these two possible sources indicates that both factors are contributing. At 671 and 694 nm wavelength, the excess signal appears to be predominantly fluorescence while that at 589 nm is mostly crosstalk. Both effects appear to be important at 625 nm although the amount of excess light is small compared to the other wavelengths.The above observations and interpretations are consistent with the optical design of the instrument used and the shape of natural irradiance spectra. Fluorescence efficiencies derived from the irradiance measurements correlate well with measuredin situ fluorescence.     

A detailed magnetic study of the Reykjanes Ridge between 63°00′N and 63°40′N

Immediately southwest of Iceland, the Reykjanes Ridge consists of a series ofen échelon, elongate ridges superposed on an elevated, smooth plateau. We have interpreted a detailed magnetic study of the portion of the Reykjanes Ridge between 63°00N and 63°40N on the Icelandic insular shelf. Because the seafloor is very shallow in our survey area (100–500 m), the surface magnetic survey is equivalent to a high-sensitivity, nearbottom experiment using a deep-towed magnetometer. We have performed two-dimensional inversions of the magnetic data along profiles perpendicular to the volcanic ridges. The inversions, which yield the magnetization distribution responsible for the observed magnetic field, allow us to locate the zones of most recent volcanism and to measure spreading rates accurately. We estimate the average half spreading rate over the last 0.72 m.y. to have been 10 mm/yr within the survey area. The two-dimensional inversions allow us also to measure polarity transition widths, which provide an indirect measure of the width of the zone of crustal accretion. We find a mean transition width on the order of 4.5±1.6 km. The observed range of transition widths (2 to 8.4 km) and their mean value are characteristic of slow-spreading centers, where the locus of crustal accretion may be prone to lateral shifts depending on the availability of magmatic sources. These results suggest that, despite the unique volcanotectonic setting of the Reykjanes Ridge, the scale at which crustal accretion occurs along it may be similar to that at which it occurs along other slow-spreading centers. The polarity transition width measurements suggest a zone of crustal accretion 4–9 km wide. This value is consistent with the observed width of volcanic systems of the Reykjanes Peninsula. The magnetization amplitudes inferred from our inversions are in general agreement with NRM intensity values of dredge samples measured by De Boer (1975) and ourselves. Our thermomagnetic measurements do not support the hypothesis that the low amplitude of magnetic anomalies near Iceland is the result of a high oxidation state of the basalts. We suggest that the observed reduction in magnetic anomaly amplitude toward Iceland may be the result of an increase in the size of pillows and other igneous units.     

The reliability of analytical data for tributyltin (TBT) in sea water and its implications on water quality criteria

To investigate the reliability of analytical data for tributyltin (TBT) in sea water, split water samples were distributed to ten laboratories in six countries. The sub-surface samples comprised: (i) an offshore (0·5 km) water sample, (ii) the same sample but spiked with an undisclosed quantity of TBT standard compound (175 ng TBT⁺ liter⁻¹), and (iii) a sample taken from a yacht marina. The seven acceptable data sets were in good agreement for the spiked sample (178 ± 26 ng TBT⁺ liter⁻¹) but showed a greater variation in concentrations reported for the yacht marina sample (366 ± 93 ng TBT⁺ liter⁻¹). Atomic absorption and gas chromatographic-flame photometric detection techniques produced results of similar accuracy and precision. Samples acidified with 1 ml of 10% (v/v) acetic acid appeared stable for more than 2 weeks when stored refrigerated and in darkness. Analyses of the offshore seawater sample revealed TBT contamination (9 ± 7 ng TBT⁺ liter⁻¹) indicating dispersion of the compound to the shelf waters off Monaco. The spread in values reported by the laboratories demonstrates inherent difficulties in obtaining good precision below approximately 20 ng TBT⁺ liter⁻¹. This observation is discussed with respect to the setting and enforcing of water quality standards.     

A seasonal survey of the sterol composition of the cockle cerastoderma edule: A comparison of polluted and non-polluted environments

The sterol composition of a cockle population from an unpolluted environment in South Wales was monitored by monthly sampling over a 12-month period. In spite of the likely variation in dietary sterols during this period, the component sterols of the cockles showed no significant seasonal variation, indicating that the cockle was able to exhibit a high degree of control over the composition of its functional sterols.Dramatic differences were observed in the sterol compositions of a nearby cockle population from a highly polluted environment, near a sewage outfall; only three out of the ten sterols present were common to the unpolluted cockles. Forty-five per cent of the sterols from the ‘polluted’ samples contained fully reduced systems and included three new alkylated C-29, C-30 and C-31 stanols. It is considered possible that these structural changes may affect the stereochemistry of the functional sterols and hence alter the permeability of the animal's membranes. This may reflect a biochemical response to the polluted environment.     

Charge-coupled device imaging spectroscopy of Mars. 1. Instrumentation and data reduction/analysis procedures

This paper describes the collection, reduction, and analysis of 0.4–1.0 m Mars imaging spectroscopy data obtained during the 1988 and 1990 oppositions from Mauna Kea Observatory and provides a general outline for the acquisition and analysis of similar imaging spectroscopy data sets. The U.H. 2.24-m Wide Field Grism CCD Spectrograph was used to collect 13 three-dimensional image cubes covering 90% of the planet south of 50°N in the 0.4–0.8 m region (/=245 at 0.6 m) and covering 55% of the planet south of 50°N in the 0.5–1.0 m region (/=293 at 0.75 m). Spectra extracted from these image cubes reveal the detailed character of the martian near-UV to visible spectrum. Images at red wavelengths reveal the classical albedo markings at 100–500 km spatial resolution while images at blue wavelengths show little surface feature contrast and are dominated by condensate clouds/hazes and polar ice. Many of the data acquisition, reduction, and analysis steps discussed here are new or unique to imaging spectroscopy data sets. These techniques exploit the information contained within the spatial domain of data such as these, thus allowing more traditional point-spectral analysis techniques to be expanded into an imaging format.     

The point spread function of the soft X-ray telescope aboard Yohkoh

The point spread function of the SXT telescope aboardYohkoh has been measured in flight configuration in three different X-ray lines at White Sands Missile Range. We have fitted these data with an elliptical generalization of the Moffat function. Our fitting method consists of ² minimizationin Fourier space, especially designed for matching of sharply peaked functions. We find excellent fits with a reduced ² of order unity or less for single exposure point spread functions over most of the CCD. Near the edges of the CCD the fits are less accurate due to vignetting. From fitting results with summation of multiple exposures we find a systematic error in the fitting function of the order of 3% near the peak of the point spread function, which is close to the photon noise for typical SXT images in orbit. We find that the full width to half maximum and fitting parameters vary significantly with CCD location. However, we also find that point spread functions measured at the same location are consistent to one another within the limit determined by photon noise. A best analytical fit to the PSF as function of position on the CCD is derived for use in SXT image enhancement routines. As an aside result we have found that SXT can determine the location of point sources to about a quarter of a 2.54 arc sec pixel.This paper is dedicated to the memory of our friend and colleague Kermit Smith, who died in June 1993, after a valient fight with leukemia.     

The American whale oil industry: A look back to the future of the American petroleum industry?

The American whaling industry rose from humble beginnings off Long island to become an international giant. In its peak year, 1846, 735 ships and 70,000 people served the industry. As whale stocks and reserves decreased, whalers were forced to go farther and farther from their New England home ports. Voyages became longer, and risks on required return-on-investment became higher. The easy money of Atlantic and Pacific whaling was no more: the only remaining profitable ventures were to Arctic and Antarctic waters. Many ships returned empty, if at all. in 1871, most of the Arctic whaling fleet was crushed by early winter ice and lost. This calamity, in conjunction with the long-term diminishing whale stocks, the diversion of investment capital to more profitable ventures, and the discovery, development, and refinement of abundant petroleum crude oil, struck the death blow to the American whaling industry. By 1890, only 200 whaling vessels were at work, and by 1971, no American commercial whaling ship sailed the world's oceans.It is apparent that no single event caused the final, rapid decline. However, a single calamity, in an already stressed industry, that was self-insured and commercially interlinked, precipitated the end. Today's American petroleum industry, although adopting some principles of the American whaling industry, also has embraced other activities such as work process reengineering and customer alliances, which may preempt, or postpone, a similar catastrophic demise.