Multiple criteria optimization applied to high speed catamaran preliminary design

The demand for high-speed craft (mainly catamarans) used as passenger vessel has increased significantly in the recent years. Looking towards the future and trying to respond to the increasing requirement, high-speed crafts international market is passing through deep changes. Different types of high-speed crafts are being used for passenger transport. However, catamarans and monohulls have been the main choice not only for passenger vessel but also as ferryboat.Generally speaking, the efficient hydrodynamic hull shapes, engine improvements, and lighter hull structures using aluminum and composite materials make possible the increase in cruising speed.The high demand for catamarans are due to its proven performance in calm waters, large deck area compared to monohull crafts and higher speed efficiency using less power. Although the advantages aforementioned, the performance of catamaran vessels in wave conditions still needs to be improved.The high-speed crafts (HSC) market is demanding different HSC designs and a wide range of dimensions focusing on lower resistance and power for higher speed. Therefore, the hull resistance optimization is a key element for a high-speed hull success.In addition to that, trade-off high-speed catamaran (HSCat) design has been improved to achieve main characteristics and hull geometry. This paper presents a contribution to HSCat preliminary design phase. The HSCat preliminary design problem is raised and one solution is attained by multiple criteria optimization technique.The mathematical model was developed considering: hull arrangement (area and volume), lightweight material application (aluminum hull), hull resistance evaluation (using a slender body theory), as well as wave interference effect between hulls, calculated with 3D theory application. Goal programming optimization system was applied to solve the HSCat preliminary design.Finally this paper includes an illustrative example showing the mathematical model and the optimization solution. An HSCat passenger inland transport in Amazon area preliminary design was used as case study. The problem is presented, the main constrains analyzed and the optimum solution shown. Trade off graphs was also included to highlight the mathematical model convergence process.     

Metal concentrations and metallothionein-like protein levels in deep-sea fishes captured near hydrothermal vents in the Mid-Atlantic Ridge off Azores

The knowledge of metal contamination in deep-sea fishes living in the surroundings of hydrothermal vents is very scarce, along with the detoxification mechanisms that allow them to live near one of the most metal contaminated marine environments. Six deep-sea fish species, although not vent endemic were collected near three Mid-Atlantic Ridge (MAR) hydrothermal vents (Menez Gwen, Lucky Strike and Rainbow) and the gills, muscle and liver were selected for this study due to their importance in metal metabolism and storage. The concentrations of seven metals (Ag, Cd, Cr, Cu, Fe, Mn, and Ni) and a metal-related biomarker (metallothionein-like proteins–MTL) were assessed. Major differences in metal accumulation among fish species are related to their feeding habits and vent site of their capture. The liver and gills are in general the most important tissues for metal accumulation compared to the muscle, but tissue partitioning is very dependent on the fish species considered. Compared to other deep-sea fishes, fish capture in the vicinity of hydrothermal vents accumulates higher amounts of metals in general. However, MTL levels are not considerably different from what is found in commercial coastal fishes, and is poorly correlated with metal concentrations in the tissues. Therefore, MTL may not constitute one major detoxification system for deep-sea species living in the vicinity of three important MAR vent sites.     

A simple and general methodology to calibrate seismic instruments for debris flow quantification: application to Cotopaxi and Tungurahua volcanoes (Ecuador)

Debris flows are hazardous phenomena occurring at volcanoes, and monitoring them has proved as challenging as imperative in several cases. The use of seismic instruments to measure and study the physical properties of debris flows has witnessed significant progress in the last years, with the use of improved sensors, innovative methodologies and high-resolution analysis. However, the application of such studies to the practical task of providing early warnings remains limited by the significant amount of infrastructural and technological resources commonly required for their deployment. In Ecuador, debris flows at volcanoes are detected by means of seismic instruments which are usually part of broader monitoring networks, thus requiring calibration to provide quantitative information about the flows and feed early-warning systems. In the present work, a theoretical approach based on the Buckingham Π-theorem is used to determine an expression that linearly correlates the seismic signal produced by a transiting debris flow with its discharge rate, for instruments installed in different substrata and at variable distances from the drainage. The expression is experimentally tested with Acoustic Flow Monitors and Broad-band seismometers installed in the vicinity of drainages at Tungurahua and Cotopaxi volcanoes, where actual debris flows occurred in relation to eruptive activity. The experiments consist in comparing the measured peak amplitude values of the seismic signal envelopes with the estimated peak discharge rates of several events. The results confirm the validity of the theoretical expression with linear correlations observed between the seismic amplitudes and the discharge rates, thus defining calibration expressions that can be generally applied to varied environments and instruments. The seismic instruments calibrated through this methodology can provide instantaneous and reliable predictions of debris flow discharge rates within less than an order of magnitude and only requiring limited data processing and storage. Such level of prediction could help to improve early warning systems based on seismic instruments installed in locations where more developed instrumental arrays are unavailable or unpractical.

     

Ultimate grout-to-soil bond strength of micropiles in glacial deposits

Acta Geotechnica - This paper analyzed the ultimate grout-to-soil bond strength based on a database of 40 full-scale static load tests conducted on micropiles in glacial deposits in the province of...     

Structural evolution history of the Red Sea Rift

The Red Sea Rift has been an object of comprehensive studies by several generations of geologists and geophysicists. Many publications and open-file reports provide insights into the geological history of this rift. Paleogene and Cretaceous rocks, which are considered to be prerift, are locally exposed at the margins of the Red Sea Rift. At the same time, some evidence indicates that at least some of these rocks are related to the early stage of the evolution of the Red Sea Rift. The available geological data suggest that the Red Sea region started its active evolution in the Cretaceous. As follows from lithostratigraphic data, the Cretaceous-Paleogene trough that predated the Oligocene-Quaternary rift covered this region completely or partially. The pre-Oligocene magmatism and geological evidence show that the Cretaceous-Paleogene trough was of the rift type. The Cretaceous-Eocene and Oligocene-Quaternary phases of rifting were separated by an epoch of uplifting and denudation documented by the erosion surface and unconformity.     

Chronology and dispersal characteristics of recently (last 5000 years) erupted tephra of Cotopaxi (Ecuador): implications for long-term eruptive forecasting

Cotopaxi, the highest active volcano on earth and one of the most dangerous of Ecuador is constituted by a composite cone made up of lava and tephra erupted from the summit crater. The activity of the present volcano begun with large-volume plinian eruptions followed by a succession of small-volume lava emissions and pyroclastic episodes which led to the edification of a symmetrical cone. The growth of the cone was broken by an episode of slope failure, the scar of which is now obliterated by recent and historical products. Volcanic history, eruptive frequency and characteristics of the activity were investigated by studying the stratigraphy of tephra and carrying out fifteen new ¹⁴C dating on paleosols and charcoals. The investigated period is comprised between the slope failure and the present. The deposit of the volcanic landside (dry debris avalanche of Rio Pita), previously believed to be between 13,000 and 25,000 yr B.P., is now considered to have an age slightly older than 5000 yr B.P. The stratigraphy of tephra of the last 2000 years reveals the existence of 22 fallout layers. Seven of them were dated with ¹⁴C whereas three were ascribed to the eruptions of 1534, 1768 and 1877 on the basis of comparison with historical information.Maximum clast size distribution (isopleths) of 9 tephra layers points out that the sustained explosive eruptions of Cotopaxi during the last 2000 years are characterized by very high dispersive power (plinian plumes with column heights between 28 and 39 km) and high intensity (peak mass discharges from 1.1 to 4.1 × 10⁸kg/s). The magnitude (mass) of tephra fallout deposits calculated from distribution of thickness (isopaches) are, however, moderate (from 0.8 to 7.2 × 10¹¹ kg). The limited volume of magma erupted during each explosive episode is consistent with the lack of caldera collapses. Small-volume pyroclastic flows and surges virtually accompanied all identified tephra fallouts. During such an activity large scale snow/ice melting of the summit glacier produced devastating mudflows comparable in scale to those of 1877 eruption. By assuming a 1:1 correspondence between fallout episodes and generation of large-scale lahar, we have estimated an average recurrence of one explosive, lahartriggering event every 117 years over the last two millennia. This value compares well with that calculated by considering the period since Spanish Conquest. The probability of having an eruption like this in 100 or 200 years is respectively of 0.57 and 0.82. Such an high probability underscores the need for quick actions aimed at the mitigation of Cotopaxi lahar hazard along all the main valleys which originate from the volcano.     

Joint simulation of multiple variables with a Markov-type coregionalization model

Many applications are multivariate in character and call for stochastic images of the joint spatial variability of multiple variables conditioned by a prior model of covariances and cross- covariances. This paper presents an algorithm to perform cosimulation of such spatially intercorrelated variables. This new algorithm builds on a Markov-type hypothesis whereby collocated information screens further away data of the same type, allowing cosimulation without the burden of a full cokriging. The proposed algorithm is checked against a synthetic multi-Gaussian reference dataset, then against a multi-Gaussian cosimulation approach using full cokriging. The results indicate that the proposed algorithm perform as well as the full cokriging approach in reproducing the univariate and bivariate statistics of the reference set, yet at less cpu cost.     

Pressure-induced phase transition in Mg0.8Fe0.2O ferropericlase

Combined X-ray powder diffraction, Mössbauer, and XANES spectroscopy in situ experiments revealed the transformation of cubic (Mg_0.8Fe_0.2)O ferropericlase to a rhombohedrally distorted phase at 35(1) GPa and room temperature. The Mössbauer spectroscopy results show that the rhombohedral distortion does not involve magnetic ordering. Combined with data from the literature, our results imply that the cubic to rhombodedral transition occurs in (Mg,Fe)O under conditions of non-hydrostatic stress over a wide range of composition (0.2≤x _Fe≤1).     

Strategies to Make Methods Based on Flow Injection Analysis Greener

The implementation of flow injection analysis (FIA) systems and correlated techniques in the laboratory routine provides an increase of analytical throughput and the reduction of risks of analyte losses and contamination. Naturally, it contributes to the reduction of reagent consumption and minimization of waste generation. This paper presents and discusses an overview of the main strategies adopted to make methods based on FIA systems more environmentally friendly, and offers a review of these methods that covers the period from January 2002 to December 2019. Strategies based on reagent management (adoption of procedures without reagents, replacement of toxic reagents, recycling and reuse of reagents and, use of immobilized reagents), the online waste treatment, and the improvements of FIA systems (flow system configurations that avoid reagent wastage, use of green detectors, automation, and miniaturization) are approached in this perspective.