Horizontal and vertical distribution of PCBs and chlorinated pesticides in sediments from Masan Bay,Korea

Horizontal and vertical distributions of organochlorine compounds (OCs) were determined in sediments from Masan Bay. The concentrations of polychlorinated biphenyls (PCBs), dichlorodiphenyltrichloroethanes (DDTs), HCB, hexachlorocyclohexanes (HCHs) and chlordane related compounds (CHLs) in sediments were in the range of 1.24-41.4, 0.28-89.2, 0.02-0.59, nd-1.03, and nd-2.56 ng/g, respectively. The spatial distribution of OCs showed a negative gradient from the inner of the bay to outer part of the bay, indicating that the source of OCs was probably located inside the bay. Compositional pattern of PCB congeners showed a relatively high concentration of high-chlorinated congeners in the inner part of the bay and a relatively low concentration of low-chlorinated congeners in the outer part. In sediment core from Masan Bay maximum concentrations of PCBs and DDTs are observed in the subsurface samples and correspond to an age of early 1980s and late 1960s. The concentration profiles of PCBs and DDTs in sediments of Masan Bay appear to correspond to use of PCBs and DDTs in Korea.     

Implementation of configuration dependent stiffness proportional damping for the dynamics of rigid multi-block systems

The distinct element method (DEM) has been used successfully for the dynamic analysis of rigid block systems. One of many difficulties associated with DEM is modeling of damping. In this paper, new procedures are proposed for the damping modeling and its numerical implementation in distinct element analysis of rigid multi-block systems. The stiffness proportional damping is constructed for the prescribed damping ratio, based on the non-zero fundamental frequency effective during the time interval while the boundary conditions remain essentially constant. At this time interval, the fundamental frequency can be estimated without complete eigenvalue analysis. The damping coefficients will vary while the damping ratio remains the same throughout the entire analysis. A new numerical procedure is developed to prevent unnecessary energy loss that can occur during the separation phases. These procedures were implemented in the development of the distinct element method for the dynamic analyses of piled multi-block systems. The analysis results for the single-block and two-block systems were in a good agreement with the analytic predictions. Applications to the seismic analyses of piled fourblock systems revealed that the new procedures can make a significant difference and may lead to much-improved results.     

Demersally drifting invertebrates from Kongsfjorden,Svalbård (Arctic Ocean)–a comparison of catches from drift-pump and drift-nets

Demersally drifting organisms were collected at Ny Ålesund (Svalbård–Arctic Ocean) to study the taxon composition and relative abundances in the Arctic summer. Catch potentials of two collection devices for demersal drift were compared. A lowvolume submersible drift-pump and a drift-net unit were employed for the collection of demersally drifting biota, particularly for shallow aquatic habitats. With the exception of Appendicularia, Chaetognatha, Coelenterata, and Ctenophora, which were damaged at times, the pump catches were in good condition and sufficient for identification and quantification of less mobile fauna. A comparison of the two devices revealed that the drift-pump collected more specimens than the drift-net. However, the drift-net may have caused an underestimation of the abundances of invertebrates. No differences in identified taxon number and indices of richness, evenness and diversity were found. However, the proportion of invertebrate animals in the two devices was different for the three groups: zooplankton, macrofauna and meiofauna. At Svalbård, zooplankton, larvae of macrofauna, and meiofauna were successfully collected by the two collecting devices. However, the catchibility of the two devices in collecting various invertebrate taxa was different and, therefore, a sound ‘Device Effect’ was revealed.     

Characterization of uranium-contaminated sediments from beneath a nuclear waste storage tank from Hanford, Washington: Implications for contaminant transport and fate

The concentration and distribution of uranium (U) in sediment samples from three boreholes recovered near radioactive waste storage tanks at Hanford, Washington, USA, were determined in detail using bulk and micro-analytical techniques. The source of contamination was a plume that contained an estimated 7000 kg of dissolved U that seeped into the subsurface as a result of an accident that occurred during filling of tank BX-102. The desorption character and kinetics of U were also determined by experiment in order to assess the mobility of U in the vadose zone. Most samples contained too little moisture to obtain quantitative information on pore water compositions. Concentrations of U (and contaminant phosphate—P) in pore waters were therefore estimated by performing 1:1 sediment-to-water extractions and the data indicated concentrations of these elements were above that of uncontaminated “background” sediments. Further extraction of U by 8 N nitric acid indicated that a significant fraction of the total U is relatively immobile and may be sequestered in mobilization-resistant phases. Fine- and coarse-grained samples in sharp contact with one another were sub-sampled for further scrutiny and identification of U reservoirs. Segregation of the samples into their constituent size fractions coupled with microwave-assisted digestion of bulk samples showed that most of the U contamination was sequestered within the fine-grained fraction. Isotope exchange (²³³U) tests revealed that ∼51% to 63% of the U is labile, indicating that the remaining fund of U is locked up in mobilization-resistant phases. Analysis by Micro-X-ray Fluorescence and Micro-X-ray Absorption Near-Edge Spectroscopy (μ-XRF and μ-XANES) showed that U is primarily associated with Ca and is predominately U(VI). The spectra obtained on U-enriched “hot spots” using Time-Resolved Laser-Induced Fluorescence Spectroscopy (TRLIFS) provide strong evidence for uranophane-type [Ca(UO₂)₂(SiO₃OH)₂(H₂O)₅] and uranyl phosphate [Ca(UO₂)₂(PO₄)₂(H₂O)_10-12] phases. These data show that disseminated micro-precipitates can form in narrow pore spaces within the finer-grained matrix and that these objects are likely not restricted to lithic fragment environments. Uranium mobility may therefore be curtailed by precipitation of uranyl silicate and phosphate phases, with additional possible influence exerted by capillary barriers. Consequently, equilibrium-based desorption models that predict the concentrations and mobility of U in the subsurface matrix at Hanford are unnecessarily conservative.     

Effects of natural and calcined oyster shells on Cd and Pb immobilization in contaminated soils

In Korea, soils adjacent to abandoned mines are commonly contaminated by heavy metals present in mine tailings. Further, the disposal of oyster shell waste by oyster farm industries has been associated with serious environmental problems. In this study, we attempted to remediate cadmium (Cd)- and lead (Pb)-contaminated soils typical of those commonly found adjacent to abandoned mines using oyster shell waste as a soil stabilizer. Natural oyster shell powder (NOSP) and calcined oyster shell powder (COSP) were applied as soil amendments to immobilize Cd and Pb. The primary components of NOSP and COSP are calcium carbonate (CaCO₃) and calcium oxide (CaO), respectively. X-ray diffraction, X-ray fluorescence and scanning electron microscope analyses conducted in this study revealed that the calcination of NOSP at 770°C converted the less reactive CaCO₃ to the more reactive CaO. The calcination process also decreased the sodium content in COSP, indicating that it was advantageous to use COSP as a liming material in agricultural soil. After 30 days of incubation, we found that the 0.1 N HCl-extractable Cd and Pb contents in soil decreased significantly as a result of an increase in the soil pH and the formation of metal hydroxides. COSP was more effective in immobilizing Cd and Pb in the contaminated soil than NOSP. Overall, the results of this study suggest that oyster shell waste can be recycled into an effective soil ameliorant.     

Availability of coastal groundwater discharge as an alternative water resource in a large-scale reclaimed land,Korea

This study was conducted to identify the availability of coastal groundwater discharge (CGD), subsurface fluids flowing from inland through the coastal area to sea, as an alternative water resource for a large-scale reclaimed land. The behaviors of stable isotopes indicated that groundwater originated from inland precipitation and traveled as CGD along the coast line. Most of the groundwater samples collected from domestic wells installed along the old coast line were considered to be relatively fresh from the correlation analysis among chemical constituents. The average electrical conductivity (EC) values of the samples were identified as averaging 1,125–1,297 μS cm^?1, corresponding to appropriate crop growth. A weathered-rock layer in a small catchment within the reclaimed land was proved to be a main CGD pathway, with electrical resistivity anomalies ranging from 7 to 14 Ω m. Five monitoring wells were placed in this catchment to delineate the occurrence of CGD. Long-term vertical EC profiling results for the monitoring wells indicated that CGD occurs within a depth of 30 m below the ground surface. Annual monitoring data for groundwater level and EC demonstrated that the water quality of CGD was improved by introducing fresh terrestrial groundwater. A remarkable improvement in water quality (EC decrease of 900–1,600 μS cm^?1) of CGD was observed during the saline water pumping test that explains how CGD could be an alternative water resource for the reclaimed land.     

Flows within the Ekman layer during spin-up of a thermally stratified fluid

Abstract

Finite-difference numerical solutions were obtained to present the flow and temperature field details within the transient Ekman layer during spin-up of a thermally stratified fluid in a cylinder. This complements the earlier studies on stratified spin-up which examined the flows in the interior core region. As the stratification increases, the following changes in the flow field are noticeable. The radial velocity in the Ekman layer decreases in magnitude. The azimuthal flows adjust smoothly from the interior region to the endwall boundary, and the Ekman layer in the azimuthal flow field fades. Vertical motions are inhibited, resulting in a weakened Ekman pumping. The axial vorticity field behaves similarly to the azimuthal flows. The temperature deviation from the equilibrium profile decreases, and the heat transfer flux from the endwall to the fluid decreases. The thickness of the thermal layer is larger than the velocity layer thickness. Illustrative comparisons of the relative sizes of the terms in the governing equations are conducted in order to assess the stratification effect in the adjustment process of the fluid.     

Implications of simultaneously mitigating and adapting to climate change: initial experiments using GCAM

Most research on future climate change discusses mitigation and impacts/adaptation separately. However, mitigation will have implications for impacts and adaptation. Similarly, impacts and adaptation will affect mitigation. This paper begins to explore these two veins of research simultaneously using an integrated assessment model. We begin by discussing the types of interactions one might expect by impact sector. Then, we develop a numerical experiment in the agriculture sector to illustrate the importance of considering mitigation, impacts, and adaptation at the same time. In our experiment, we find that climate change can reduce crop yields, resulting in an expansion of cropland to feed a growing population and a reduction in bioenergy production. These two effects, in combination, result in an increase in the cost of mitigation.     

Sensitivity of multi-gas climate policy to emission metrics

The Global Warming Potential (GWP) index is currently used to create CO₂-equivalent emission totals for multi-gas greenhouse targets. While many alternatives have been proposed, it is not possible to uniquely define a metric that captures the different impacts of emissions of substances with widely disparate atmospheric lifetimes, which leads to a wide range of possible index values. We examine the sensitivity of emissions and climate outcomes to the value of the index used to aggregate methane emissions using a technologically detailed integrated assessment model. The methane index is varied between 4 and 70, with a central value of 21, which is the 100-year GWP value currently used in policy contexts. We find that the sensitivity to index value is, at most, 10–18 % in terms of methane emissions but only 2–3 % in terms of the maximum total radiative forcing change, with larger regional emissions differences in some cases. The choice of index also affects estimates of the cost of meeting a given end of century forcing target, with total two-gas mitigation cost increasing by 7–9 % if the index is increased, and increasing in most scenarios from 4 to 23 % if the index is lowered, with a slight (1 %) decrease in total cost in one case. We find that much of the methane abatement occurs as the induced effect of CO₂ abatement rather than explicit abatement, which is one reason why climate outcomes are relatively insensitive to the index value. We also find that the near-term climate benefit of increasing the methane index is small.