Oxidation of CO on surface hematite in high CO2 atmospheres

We propose a mechanism for the oxidation of gaseous CO into CO₂ occurring on the surface mineral hematite (Fe₂O₃(s)) in hot, CO₂-rich planetary atmospheres, such as Venus. This mechanism is likely to constitute an important source of tropospheric CO₂ on Venus and could at least partly address the CO₂ stability problem in Venus’ stratosphere, since our results suggest that atmospheric CO₂ is produced from CO oxidation via surface hematite at a rate of 0.4 petagrammes (Pg) CO₂ per (Earth) year on Venus which is about 45% of the mass loss of CO₂ via photolysis in the Venusian stratosphere. We also investigated CO oxidation via the hematite mechanism for a range of planetary scenarios and found that modern Earth and Mars are probably too cold for the mechanism to be important because the rate-limiting step, involving CO(g) reacting onto the hematite surface, proceeds much slower at lower temperatures. The mechanism may feature on extrasolar planets such as Gliese 581c or CoRoT-7b assuming they can maintain solid surface hematite which, e.g. starts to melt above about 1200 K. The mechanism may also be important for hot Hadean-type environments and for the emerging class of hot Super-Earths with planetary surface temperatures between about 600 and 900 K.     

Precipitation of heavy metals in produced water: influence on contaminant transport and toxicity

Produced water undergoes changes in its physical chemistry including precipitation of heavy metals after being discharged and mixed with ambient seawater. Potential impacts of the precipitation of heavy metals on their transport and toxicity were studied using samples from offshore oil production sites on the Scotian Shelf off eastern Canada. Concentrations of aluminum, cadmium, chromium, cobalt, copper, iron, lead, manganese, nickel and zinc were measured in total, particulate and dissolved fractions together with Microtox tests for assessment of toxicity. Heavy metals in produced water were transformed from dissolved to particulate phase in a period of hours under oxygenated conditions, and aggregated to larger particles that settle rapidly (>100 m/day) over a few days. In addition, there was production of buoyant particles comprised of heavy metal precipitates sequestered onto oil droplets that were transported to the surface. The particulate fraction was generally more toxic than the dissolved fraction. This was evident at the mixing interface between produced water and seawater where elevated particulate and toxicity levels were observed. Laboratory studies suggest an increase in the toxicity of discharged produced water over time. Time-series experiments showed a sustained toxic response for more than a week following the oxidation of freshly discharged produced water that initially elicited little or no toxic response in the Microtox test. Chemical processes identified in this study, namely precipitation of heavy metals and consequent settling and rising fluxes of particles, will influence the toxicity, the fate and the transport of potential contaminants in the produced water. Therefore, these processes need to be considered in assessment of the environmental impact associated with offshore oil and gas operations.     

210Pb and 7Be as Tracers for Aerosol Transfers at Center Guizhou，China：Ⅰ．The Explanation by Weekly Interval

It′s essential to measure air concentrations and depositional fluxes of environmental radionuclides in different regions for modeling global contamination transfer and validation, tracing deposition process and dating, referencing watershed erosion trace and assessing natural radiation of ecosystem. This study introduces the research background and methods and explains weekly variations of ²¹⁰Pb and ⁷Be concentrations in surface air and precipitation at Mt. Guanfeng/Guiyang since 2001. The results indicate that ²¹⁰Pb and ⁷Be concentrations in surface air fluctuate periodically at 2~6 week interval because of the meteorological condition changes. The annual trend in ²¹⁰Pb air concentration is overall influenced by air temperature variation and periodical rainfall. ⁷Be air concentration varies up and down regualarly. The synchronization of low concentrations for both ²¹⁰Pb and ⁷Be in surface air and high ratio (²¹⁰Pb/⁷Be ≥ 0.8) indicate oceanic poor ²¹⁰Pb-⁷Be air mass invasion. The synchronization of high concentrations of ²¹⁰Pb and ⁷Be in surface air and low ratio (²¹⁰Pb/⁷Be ≤ 0.7) implies rich ⁷Be air mass invasion from altostratus atmosphere. Weekly concentrations of ²¹⁰Pb and ⁷Be in precipitation and the K_d coefficients are high in late Autumn to Spring, and low in late Spring to Autumn. Although ²¹⁰Pb and ⁷Be concentrations vary seasonally, their weekly concentrations in precipitation increase with that of air concentration. The ²¹⁰Pb and ⁷Be weekly concentrations for seasonal division is about 0.2 Bq/L and 1 Bq/L, respectively. However, the K_d coefficient decreases when ²¹⁰Pb and ⁷Be air concentrations increase. Deposition of ²¹⁰Pb and ⁷Be with precipitation mainly take place in Spring and Summer; The weekly fallout of ²¹⁰Pb and ⁷Be increases with increasing precipitation; the increase of ⁷Be is triple of that of ²¹⁰Pb and 2.5 when precipitation nears to zero. The weekly-high fallout of ²¹⁰Pb and ⁷Be with precipitation corresponds with the dramatic decrease of their air concentrations within or vicinal weeks. The ratio of ²¹⁰Pb to ⁷Be in rainfall is overall ≤ 0.5 and varies synchronously with the ratio in surface air, indicating that the two radionuclides are cleaned by precipitation from air at close speed. In the extreme freezing disaster in 2008, both ²¹⁰Pb and ⁷Be air concentrations were low and coupling with coexist of low concentration of aerosol and high nuclides activities. Weekly concentration of ⁷Be in surface air at Mt. Guanfeng demonstrates the anticipated concentration level in the low-latitude and high-elevation region; the short-term fluctuations of ⁷Be concentration indicated the hysteresis was influcenced by the strong air current submersion and the low-elevation air mass rising differently at Mt. Guanfeng and Mt. Waliguan.      

使用NexION 300 ICP-MS按照加利福尼亚州65号法案测定钙制酸剂和膳食补充剂中的铅

按照美国加利福尼亚州65号法案中对钙制酸剂和膳食补充剂中Pb的控制要求,分析方法对这类固体物质中铅的检出限要求低于0.05g/g。电感耦合等离子体质谱仪(ICP-MS)的分析能力使其成为常规检测中低含量Pb测定的最佳仪器。但是,如果不采用特定的预防措施消除潜     

GIS-based distributed technique for assessing economic loss from flood damage: pre-feasibility study for the Anyang Stream Basin in Korea

Large national budgets are required for flood damage reduction projects, making it critical to ensure that public money used therein be spent efficiently. Accordingly, reliable assessment of flood damage is a critical issue in analysis of the economic aspects of flood damage reduction projects. To this end, this study aims to provide a GIS (geographical information system)-based technique for distributed flood damage assessment. We consider two aspects of flood damage assessment from an engineering and economic perspective, i.e. flood inundation analysis and multi-dimensional flood damage analysis (MD-FDA). To perform this assessment, we used a GIS-based framework and data processing method to assess damages. The proposed methodology was applied to flood control channel projects for flood disaster prevention in the Anyang Stream Basin in Korea and presents detailed GIS data processing and assessment results. Findings from this study may contribute to the improvement of usability of MD-FDA and may provide research directions for integrating economic and engineering factors. This distributed technique will also assist in the decision-making process when evaluating the economic feasibility of flood damage reduction projects for structural and non-structural measures.     

Estimation of soil weathering degree using electrical resistivity

In this study, the electrical resistivity of soil having different chemical weathering index (CWI) was measured, and the correlation between CWI and the electrical resistivity was estimated. The electrical resistivity of soil varies with CWI of soil. The difference in the electrical resistivities of soils having different weathering degrees is clear at lower water contents. At the volumetric water contents estimated in this study, CWI could be described by a linear equation of electrical resistivity with the constants related to the volumetric water content. The findings in this study suggest that the electrical resistivity could be used as an effective alternative for estimating the weathering degree of soil.     

Effects of natural and calcined oyster shells on Cd and Pb immobilization in contaminated soils

In Korea, soils adjacent to abandoned mines are commonly contaminated by heavy metals present in mine tailings. Further, the disposal of oyster shell waste by oyster farm industries has been associated with serious environmental problems. In this study, we attempted to remediate cadmium (Cd)- and lead (Pb)-contaminated soils typical of those commonly found adjacent to abandoned mines using oyster shell waste as a soil stabilizer. Natural oyster shell powder (NOSP) and calcined oyster shell powder (COSP) were applied as soil amendments to immobilize Cd and Pb. The primary components of NOSP and COSP are calcium carbonate (CaCO₃) and calcium oxide (CaO), respectively. X-ray diffraction, X-ray fluorescence and scanning electron microscope analyses conducted in this study revealed that the calcination of NOSP at 770°C converted the less reactive CaCO₃ to the more reactive CaO. The calcination process also decreased the sodium content in COSP, indicating that it was advantageous to use COSP as a liming material in agricultural soil. After 30 days of incubation, we found that the 0.1 N HCl-extractable Cd and Pb contents in soil decreased significantly as a result of an increase in the soil pH and the formation of metal hydroxides. COSP was more effective in immobilizing Cd and Pb in the contaminated soil than NOSP. Overall, the results of this study suggest that oyster shell waste can be recycled into an effective soil ameliorant.     

Delineation of landslide hazard areas on Penang Island, Malaysia, by using frequency ratio, logistic regression, and artificial neural network models

This paper summarizes findings of landslide hazard analysis on Penang Island, Malaysia, using frequency ratio, logistic regression, and artificial neural network models with the aid of GIS tools and remote sensing data. Landslide locations were identified and an inventory map was constructed by trained geomorphologists using photo-interpretation from archived aerial photographs supported by field surveys. A SPOT 5 satellite pan sharpened image acquired in January 2005 was used for land-cover classification supported by a topographic map. The above digitally processed images were subsequently combined in a GIS with ancillary data, for example topographical (slope, aspect, curvature, drainage), geological (litho types and lineaments), soil types, and normalized difference vegetation index (NDVI) data, and used to construct a spatial database using GIS and image processing. Three landslide hazard maps were constructed on the basis of landslide inventories and thematic layers, using frequency ratio, logistic regression, and artificial neural network models. Further, each thematic layer’s weight was determined by the back-propagation training method and landslide hazard indices were calculated using the trained back-propagation weights. The results of the analysis were verified and compared using the landslide location data and the accuracy observed was 86.41, 89.59, and 83.55% for frequency ratio, logistic regression, and artificial neural network models, respectively. On the basis of the higher percentages of landslide bodies predicted in very highly hazardous and highly hazardous zones, the results obtained by use of the logistic regression model were slightly more accurate than those from the other models used for landslide hazard analysis. The results from the neural network model suggest the effect of topographic slope is the highest and most important factor with weightage value (1.0), which is more than twice that of the other factors, followed by the NDVI (0.52), and then precipitation (0.42). Further, the results revealed that distance from lineament has the lowest weightage, with a value of 0. This shows that in the study area, fault lines and structural features do not contribute much to landslide triggering.