Selection of the wavenumbers k using an optimization method for the inverse Fourier transform in 2.5D electrical modelling

An optimization method is used to select the wavenumbers k for the inverse Fourier transform in 2.5D electrical modelling. The model tests show that with the wavenumbers k selected in this way the inverse Fourier transform performs with satisfactory accuracy.     

Simulation of the interaction of galactic cosmic‐ray protons with meteoroids: On the production of radionuclides in thick gabbro and iron targets irradiated isotropically with 1.6 GeV protons

Abstract— Thick spherical targets made of gabbro (R = 25 cm) and of steel (R = 10 cm) were irradiated isotropically with 1.6 GeV protons at the Saturne synchrotron at Laboratoire National Saturne (LNS)/CEN Saclay in order to simulate the interaction in space of galactic cosmic‐ray (GCR) protons with stony and iron meteoroids. Proton fluences of 1.32 × 10¹⁴ cm^?2 and 2.45 × 10¹⁴ cm^?2 were received by the gabbro and iron sphere, respectively, which corresponds to cosmic‐ray exposure ages of about 1.6 and 3.0 Ma. Both artificial meteoroids contained large numbers of high‐purity target foils of up to 28 elements at different depths. In these individual target foils, elementary production rates of radionuclides and rare gas isotopes were measured by x‐ and γ‐spectrometry, by low‐level counting, accelerator mass spectrometry (AMS), and by conventional rare gas mass spectrometry. Also samples of the gabbro itself were analyzed. Up to now, for each of the experiments, ～500 target‐product combinations were investigated of which the results for radionuclides are presented here. The experimental production rates show a wide range of depth profiles reflecting the differences between low‐, medium‐, and high‐energy products. The influence of the stony and iron matrices on the production of secondary particles and on particle transport, in general, and consequently on the production rates is clearly exhibited by the phenomenology of the production rates as well as by a detailed theoretical analysis. Theoretical production rates were calculated in an a priori way by folding depth‐dependent spectra of primary and secondary protons and secondary neutrons calculated by Monte Carlo techniques with the excitation functions of the underlying nuclear reactions. Discrepancies of up to a factor of 2 between the experimental and a priori calculated depth profiles are attributed to the poor quality of the mostly theoretical neutron excitation functions. Improved neutron excitation functions were obtained by least‐squares deconvolution techniques from experimental thick‐target production rates of up to five thick‐target experiments in which isotropic irradiations were performed. A posteriori calculations using the adjusted neutron cross sections describe the measured depth profiles of all these simulation experiments within 9%. The thus validated model calculations provide a basis for reliable physical model calculations of the production rates of cosmogenic nuclides in stony and iron meteorites as well as in lunar samples and terrestrial materials.     

Transnational Corporations and Local Embeddedness: Company Case Studies from Shanghai,China

Many factors impinge on local involvement in transnational corporation (TNC) networks. Two factors have not been explored, the previous economic strength of local partners and the large domestic market. This study employs site interviews and survey data in Shanghai to demonstrate that these two factors do affect the local involvement in management, industrial linkages, and technology transfer. The paper discusses China's cultural and political background, TNC's market‐capture motive, and equity joint ventures as the most common entry modes. The influence appears more evident when the two factors come together in joint ventures. Evidence also suggests that the overall localization level in Shanghai is lower than in some other developing countries because of the novelty of TNC investment in the city. On this account, as joint ventures constitute the main mode of TNC investment, increasing localization is anticipated in the years ahead.     

Zircon M127 – A Homogeneous Reference Material for SIMS U–Pb Geochronology Combined with Hafnium,Oxygen and,Potentially, Lithium Isotope Analysis

In this article, we document a detailed analytical characterisation of zircon M127, a homogeneous 12.7 carat gemstone from Ratnapura, Sri Lanka. Zircon M127 has TIMS‐determined mean U–Pb radiogenic isotopic ratios of 0.084743 ± 0.000027 for ²⁰⁶Pb/²³⁸U and 0.67676 ± 0.00023 for ²⁰⁷Pb/²³⁵U (weighted means, 2s uncertainties). Its ²⁰⁶Pb/²³⁸U age of 524.36 ± 0.16 Ma (95% confidence uncertainty) is concordant within the uncertainties of decay constants. The δ¹⁸O value (determined by laser fluorination) is 8.26 ± 0.06‰ VSMOW (2s), and the mean ¹⁷⁶Hf/¹⁷⁷Hf ratio (determined by solution ICP‐MS) is 0.282396 ± 0.000004 (2s). The SIMS‐determined δ⁷Li value is ?0.6 ± 0.9‰ (2s), with a mean mass fraction of 1.0 ± 0.1 μg g^?1 Li (2s). Zircon M127 contains ~ 923 μg g^?1 U. The moderate degree of radiation damage corresponds well with the time‐integrated self‐irradiation dose of 1.82 × 10¹⁸ alpha events per gram. This observation, and the (U–Th)/He age of 426 ± 7 Ma (2s), which is typical of unheated Sri Lankan zircon, enable us to exclude any thermal treatment. Zircon M127 is proposed as a reference material for the determination of zircon U–Pb ages by means of SIMS in combination with hafnium and stable isotope (oxygen and potentially also lithium) determination.     

Exploring the impact of diagenesis on (isotope) geochemical and microstructural alteration features in biogenic aragonite

For the Quaternary and Neogene, aragonitic biogenic and abiogenic carbonates are frequently exploited as archives of their environment. Conversely, pre‐Neogene aragonite is often diagenetically altered and calcite archives are studied instead. Nevertheless, the exact sequence of diagenetic processes and products is difficult to disclose from naturally altered material. Here, experiments were performed to understand biogenic aragonite alteration processes and products. Shell subsamples of the bivalve Arctica islandica were exposed to hydrothermal alteration. Thermal boundary conditions were set at 100°C, 175°C and 200°C. These comparably high temperatures were chosen to shorten experimental durations. Subsamples were exposed to different ¹⁸O‐depleted fluids for durations between two and twenty weeks. Alteration was documented using X‐ray diffraction, cathodoluminescence, fluorescence and scanning electron microscopy, as well as conventional and clumped isotope analyses. Experiments performed at 100°C show redistribution and darkening of organic matter, but lack evidence for diagenetic alteration, except in Δ₄₇ which show the effects of annealing processes. At 175°C, valves undergo significant aragonite to calcite transformation and neomorphism. The δ¹⁸O signature supports transformation via dissolution and reprecipitation, but isotopic exchange is limited by fluid migration through the subsamples. Individual growth increments in these subsamples exhibit bright orange luminescence. At 200°C, valves are fully transformed to calcite and exhibit purple‐blue luminescence with orange bands. The δ¹⁸O and Δ₄₇ signatures reveal exchange with the aqueous fluid, whereas δ¹³C remains unaltered in all experiments, indicating a carbonate‐buffered system. Clumped isotope temperatures in high‐temperature experiments show compositions in broad agreement with the measured temperature. Experimentally induced alteration patterns are comparable with individual features present in Pleistocene shells. This study represents a significant step towards sequential analysis of diagenetic features in biogenic aragonites and sheds light on reaction times and threshold limits. The limitations of a study restricted to a single test organism are acknowledged and call for refined follow‐up experiments.     

New Reference Materials and Assessment of Matrix Effects for SIMS Measurements of Oxygen Isotopes in Garnet

Accurate ion microprobe analysis of oxygen isotope ratios in garnet requires appropriate reference materials to correct for instrumental mass fractionation that partly depends on the garnet chemistry (matrix effect). The matrix effect correlated with grossular, spessartine and andradite components was characterised for the Cameca IMS 1280HR at the SwissSIMS laboratory based on sixteen reference garnet samples. The correlations fit a second‐degree polynomial with maximum bias of ca. 4‰, 2‰ and 8‰, respectively. While the grossular composition range 0–25% is adequately covered by available reference materials, there is a paucity of them for intermediate compositions. We characterise three new garnet reference materials GRS2, GRS‐JH2 and CAP02 with a grossular content of 88.3 ± 1.2% (2s), 83.3 ± 0.8% and 32.5 ± 3.0%, respectively. Their micro scale homogeneity in oxygen isotope composition was evaluated by multiple SIMS sessions. The reference δ¹⁸O value was determined by CO₂ laser fluorination (δ¹⁸O_LF). GRS2 has δ¹⁸O_LF = 8.01 ± 0.10‰ (2s) and repeatability within each SIMS session of 0.30–0.60‰ (2s), GRS‐JH2 has δ¹⁸O_LF = 18.70 ± 0.08‰ and repeatability of 0.24–0.42‰ and CAP02 has δ¹⁸O_LF = 4.64 ± 0.16‰ and repeatability of 0.40–0.46‰.     

Diagenetic evolution of Aptian evaporites in the Namibe Basin (south‐west Angola)

The widespread and dissected nature of the Angolan gypsiferous salt residuals offers a uniquely detailed view of the lateral and vertical relations inherent to secondary evaporite textures, which typify exhumed salt masses worldwide. Such secondary textures are sometimes misinterpreted as primary evaporite textures. Thin, metre‐scale and patchy, dome‐like gypsum accumulations are well‐exposed within strongly incised present‐day river valleys along the eastern margin of the Namibe and Benguela basins (south‐west Angola). These sections are time equivalent to the main basinward subsurface evaporites (Aptian Loeme Formation) which mostly consist of halite. The gypsum (here called the Bambata Formation) is interpreted to represent the final residual product of fractional dissolution and recrystallization of the halite mass that occurred during Late Cretaceous margin uplift and continues today. This halite underwent multiple episodes of diagenetic alteration between its deposition and its final exhumation, leading to the formation of various secondary gypsum fabrics and solution‐related karst and breccia textures that typify the current evaporite outcrop. Four different diagenetic gypsum fabrics are defined: thinly bedded alabastrine, nodular alabastrine, displacive selenite rosettes and fibrous satin‐spar gypsum. Current arid conditions are responsible for a thin weathered crust developed at the top of the outcropping gypsum, but the fabrics in the main core of the current at‐surface evaporite unit mostly formed during the telogenetic stage of uplift prior to complete subaerial exposure. Alteration occurred as various dissolving and rehydrating saline minerals encountered shallow aquifers in the active phreatic and vadose zones. Geomorphological and petrographic analyses, mostly based on the cross‐cutting relations and crystallographic patterns in the outcrop, are used to propose a sequence of formation of these different fabrics.     

Diagenetic formation of gypsum and dolomite in a cold‐water coral mound in the Porcupine Seabight,off Ireland

Authigenic gypsum was found in a gravity core, retrieved from the top of Mound Perseverance, a giant cold‐water coral mound in the Porcupine Basin, off Ireland. The occurrence of gypsum in such an environment is intriguing, because gypsum, a classic evaporitic mineral, is undersaturated with respect to sea water. Sedimentological, petrographic and isotopic evidence point to diagenetic formation of the gypsum, tied to oxidation of sedimentary sulphide minerals (i.e. pyrite). This oxidation is attributed to a phase of increased bottom currents which caused erosion and enhanced inflow of oxidizing fluids into the mound sediments. The oxidation of pyrite produced acidity, causing carbonate dissolution and subsequently leading to pore‐water oversaturation with respect to gypsum and dolomite. Calculations based on the isotopic compositions of gypsum and pyrite reveal that between 21·6% and 28·6% of the sulphate incorporated into the gypsum derived from pyrite oxidation. The dissolution of carbonate increased the porosity in the affected sediment layer but promoted lithification of the sediments at the sediment‐water interface. Thus, authigenic gypsum can serve as a signature for diagenetic oxidation events in carbonate‐rich sediments. These observations demonstrate that fluid flow, steered by environmental factors, has an important effect on the diagenesis of coral mounds.     

象牙海岸Issia地区铌钽砂矿的研究(英文)

在西非的象牙海岸Issia地区分布着许多铌钽矿床,包括原生矿和砂矿。原生矿产在分带很好的伟晶岩中。这个地区发育着许多花岗岩和花岗伟晶岩。伟晶岩可分为:(1)分异不好的伟晶岩,无矿化;(2)含Be伟晶岩,分带较好,见绿柱石;(3)含Be-Nb-Ta的伟晶岩,分带很好,是矿体;(4)Be-Nb-Ta-Li伟晶岩,分带很好,是矿体。除了10多个原生矿外,还有许多砂矿。砂矿有两种类型:一种近原生矿的坡积砂矿,另一种是经河流冲刷搬运后的冲积砂矿。我们选择了Etienne-Meguhe砂矿作为近原生矿的坡积砂矿的代表,Bemadi矿作为河流冲积型的砂矿的代表,对这两种类型的砂矿的风化、搬运、沉积机理进行了比较研究。研究发现不同的搬运距离和搬运模式对铌钽砂矿的主要矿物——铌钽铁矿的化学性质没有什么影响,而其物理形态则发生了变化。坡积型砂矿的铌钽铁矿常与石英、长石等矿物连生,其颗粒大小与原生的Nb-Ta伟晶岩中的铌钽铁矿一致;经河流冲积而形成的砂矿中,铌钽铁矿颗粒变小、轮廓变得圆滑,几乎无连生矿物,但矿体集中,常在河流的冲积扇中分布,易开采。