Towards quantitative ecological risk assessment of elevated carbon dioxide levels in the marine environment

The environmental impact of elevated carbon dioxide (CO₂) levels has become of more interest in recent years. This, in relation to globally rising CO₂ levels and related considerations of geological CO₂ storage as a mitigating measure. In the present study effect data from literature were collected in order to conduct a marine ecological risk assessment of elevated CO₂ levels, using a Species Sensitivity Distribution (SSD). It became evident that information currently available from the literature is mostly insufficient for such a quantitative approach. Most studies focus on effects of expected future CO₂ levels, testing only one or two elevated concentrations. A full dose-response relationship, a uniform measure of exposure, and standardized test protocols are essential for conducting a proper quantitative risk assessment of elevated CO₂ levels. Improvements are proposed to make future tests more valuable and usable for quantitative risk assessment.     

Optimizing the Environmental Performance of In Situ Thermal Remediation Technologies Using Life Cycle Assessment

In situ thermal remediation technologies provide efficient and reliable cleanup of contaminated soil and groundwater, but at a high cost of environmental impacts and resource depletion due to the large amounts of energy and materials consumed. This study provides a detailed investigation of four in situ thermal remediation technologies (steam enhanced extraction, thermal conduction heating, electrical resistance heating, and radio frequency heating) in order to (1) compare the life‐cycle environmental impacts and resource consumption associated with each thermal technology, and (2) identify options to reduce these adverse effects. The study identifies a number of options for environmental optimization of in situ thermal remediation. In general, environmental optimization can be achieved by increasing the percentage of heating supplied in off peak electricity demand periods as this reduces the pressure on coal‐based electricity and thereby reduces the environmental impacts due to electricity production by up to 10%. Furthermore, reducing the amount of concrete in the vapor cap by using a concrete sandwich construction can potentially reduce the environmental impacts due to the vapor cap by up to 75%. Moreover, a number of technology‐specific improvements were identified, for instance by the substitution of stainless steel types in wells, heaters, and liners used in thermal conduction heating, thus reducing the nickel consumption by 45%. The combined effect of introducing all the suggested improvements is a 10 to 21% decrease in environmental impacts and an 8 to 20% decrease in resource depletion depending on the thermal remediation technology considered. The energy consumption was found to be the main contributor to most types of environmental impacts; this will, however, depend on the electricity production mix in the studied region. The combined improvement potential is therefore to a large extent controlled by the reduction/improvement of energy consumption.     

The U-WEDGE Transformation Method for Multivariate Geostatistical Simulation

To speed up multivariate geostatistical simulation it is common to transform the set of attributes into spatially uncorrelated factors that can be simulated independently. Spatial decorrelation methods are usually based on the diagonalisation of the variance/covariance and semivariogram matrices of the set of attributes for a chosen family of lag spacings. These matrices are symmetric and there are several efficient methods for the approximate joint diagonalisation of a family of symmetric matrices. One of these is the uniformly weighted exhaustive diagonalisation with Gauss iterations (U-WEDGE) method. In contrast to the method of minimum/maximum autocorrelation factors (MAF), where a two structure linear model of coregionalisation is assumed, U-WEDGE can be applied directly to the set of experimental semivariogram matrices without having to place restrictions on the number of structures in the linear model of coregionalisation, thus removing one of the restrictions placed on the subsequent modelling of the spatial structure of the factors. We use an iron-ore data set to illustrate the method and present a comparison between the simulated attributes obtained from U-WEDGE and MAF with the full co-simulation of the attributes.     

Rubber tapper identities: Political-economic dynamics,livelihood shifts,and environmental implications in a changing Amazon

Rubber tappers promoted extractive reserves as a sustainable alternative to forest destruction in the Brazilian Amazon. However, the significance of rubber tapping itself has declined since the creation of extractive reserves, which raises questions about the contemporary cultural content of the rubber tapper identity. This paper therefore evaluates rubber tapper identity, using the case of the Chico Mendes Extractive Reserve (CMER) in Acre, Brazil. We first draw on household survey data from the CMER to construct a statistical model of who self-identifies as a rubber tapper. The model shows that socio-economic background, household assets, institutional context, and knowledge of the CMER’s management plan are relevant to understanding rubber tapper self-identification, but not resource management practices, including rubber tapping itself. We therefore pursue qualitative analysis of key informant interviews to better apprehend contemporary understandings of the “rubber tapper” identity, particularly in light of recent shifts in livelihoods from rubber tapping toward cattle ranching. The qualitative analysis shows that there are now several different foundations for self-identifying as a “rubber tapper,” and that there are disagreements concerning the acceptability of cattle ranching among “rubber tappers.” These findings bear implications for research on the relationship of livelihood-based identities with resource management practices and environmental change, as well as public policies that seek to reconcile regional development with forest conservation.     

New insights into the 1999 eruption of Shishaldin volcano,Alaska, based on acoustic data

Data collected by a pressure sensor provide new insights into the 1999 eruption of Shishaldin volcano, Unimak Island, Alaska. On 19 April 1999, after 3 months of unrest and an extended period of low-level Strombolian activity, Shishaldin experienced a Subplinian eruption (ash plume to >16 km), followed by several episodes of strong Strombolian explosions. Acoustic data from the pressure sensor allow us to investigate the details of an eruption which was instrumentally well recorded, but with few visual observations. In the 12 h prior to the Subplinian phase, the pressure sensor detected a series of small, repeated pulses with a constant spectral peak at 2–3 Hz. The amplitude and occurrence rate of the pulses both grew such that the signal became a nearly continuous hum just before the Subplinian eruption. This humming signal may represent gas release from rising magma. The main Subplinian phase was heralded by (1) the abrupt end of the humming signal, (2) several pulses of low-frequency sound interpreted as ash bursts, and (3) a dramatic increase in seismic tremor amplitude. The change in acoustic signature at this time allows us to precisely time the start of the Subplinian eruption, previously approximated as the time of strongest tremor increase. The 50-min Subplinian phase actually contained several bursts of signal, each of which may represent a discrete volume of magma passing through the system. Following the Subplinian event, the pressure sensor recorded four discrete episodes of Strombolian gas explosions on 19–20 April and another on 22–23 April. Four of the five episodes were accompanied by strong seismic tremor; the fifth has not been previously recognized and was not associated with anomalous tremor amplitudes. In time series these events are similar to explosions recorded at other volcanoes but in general they are much larger, with maximum amplitudes of >65 Pa at 6.5 km from the vent, and they have low (0.7–1.5 Hz) peak frequencies. These large explosions occurred at rates of 3–20 per minute for 1–5 h in each episode. The explosions were accompanied by a small (<5 km above sea level) ash plume and only minor amounts of ejecta were produced. Thus, the explosion activity was dominated by gas release.     

Ceilometer observations of aerosol layer structure above the Petit Lubéron during ESCOMPTE's IOP 2

A modified ceilometer has been used during the second Intensive Observation Period (IOP) of the “Expérience sur Site pour COntraindre les Modèles de Pollution atmosphériques et de Transport d'Émission” (ESCOMPTE) to perform continuous remote observations of aerosol accumulations in the first 3 km of the atmosphere. These observations encompassed an episode of intense particulate and photochemical pollution. The submicronic particles density, measured at an altitude of 600 m, went from a very low point of a few tens of particles per cubic centimeter (at the end of a Mistral episode in the free atmosphere) to a high point of more than 4500 particles per cubic centimeter (when pollutants were trapped by thermal inversions).The main result is that this instrument enables a fine documentation of the mixing layer height and of aerosol particles stratifications and circulation. Airborne aerosol measurements have been made above the mountainous region of Mérindol in order to validate in situ the remote sensing measurements. Ozone measurements near the summit of the mountains as well as in the valley were performed in order to correlate aerosol accumulation and ozone concentration. As a notable example, the two-layer aerosol stratification seen in the first 2 days of IOP 2b in that part of the ESCOMPTE domain confirms the results of another team which used backtrajectories. The low-altitude pollution for this timeframe had a local origin (the Fos industrial area), whereas above 500 m, the air masses had undergone regional-scale transport (from north-eastern Spain).The second major result is the highlighting of a pattern, in sea breeze conditions and in this part of the ESCOMPTE experiment zone, of nocturnal aerosol accumulation at an altitude of between 500 and 2000 m, followed by high ozone concentration the next day.     

Holocene vegetation development in the catchment of Sägistalsee ( 1935 m asl), a small lake in the Swiss Alps

Pollen and plant macrofossils were analysed at Sägistalsee (1935 m asl), a small lake near timber-line in the Swiss Northern Alps. Open forests with Pinus cembra and Abies alba covered the catchment during the early Holocene (9000–6300 cal. BP), suggesting subcontinental climate conditions. After the expansion of Picea abies between 6300 and 6000 cal. BP the subalpine forest became denser and the tree-line reached its maximum elevation at around 2260 m asl. Charcoal fragments in the macrofossil record indicate the beginning of Late-Neolithic human impact at ca. 4400 cal. BP, followed by a extensive deforestation and lowering of the forest-limit in the catchment of Sägistalsee at 3700 cal. BP (Bronze Age). Continuous human activity, combined with a more oceanic climate during the later Holocene, led to the local extinction of Pinus cembra and Abies alba and favoured the mass expansion of Picea and Alnus viridis in the subalpine area of the Northern Alps. The periods before 6300 and after 3700 cal. BP are characterised by high erosion activity in the lake's catchment, whereas during the phase of dense Picea-Pinus cembra-Abies forests (6300–3700 cal. BP) soils were stable and sediment-accumulation rates in the lake were low. Due to decreasing land-use at higher altitudes during the Roman occupation and the Migration period, forests spread beween ca. 2000 and 1500 cal. BP, before human impact increased again in the early Middle Ages. Recent reforestation due to land-use changes in the 20th century is recorded in the top sediments. Pollen-inferred July temperature and annual precipitation suggest a trend to cooler and more oceanic climate starting at about 5500 cal. BP.     

Vegetation cutting as a clean-up method for salt and brackish marshes impacted by oil spills: a review and case history of the effects on plant recovery

Manual cutting of marsh vegetation contaminated by oil spills is often debated as a clean-up technique. Cutting oiled marsh vegetation may be proposed to prevent the oiling of sensitive wildlife associated with marshes. Less frequently, oiled marshes may be cut to aid vegetation recovery. This paper reviews several studies of oiled marsh cutting, and presents a case history of the Grand Eagle oil spill, where marsh cutting was used as a clean-up technique. The paper focuses on the effects of cutting on oiled vegetation survival and structural recovery. We conclude that cutting is often detrimental. Marshes should not be cut when impacted by light oils, where high flushing rates are present, or where re-oiling would be likely. Cutting should only be considered for areas where oil may persist, significant impacts to wildlife are likely, and less destructive clean-up techniques have proven insufficient. Seasonality should be considered prior to cutting, since vegetation impacts may be less likely during fall and winter. Concurrent stresses, such as unusual or extreme salinity or hydrological conditions, should also be considered prior to cutting, to avoid stressing oiled vegetation beyond recovery. Finally, if vegetation cutting is used in marsh environments, substrate disturbance should be avoided.     

Community resources for small city creativity? Rethinking creative economy narratives at the Blue Mountains Music Festival

ABSTRACT

Limitations in scale, infrastructure and business opportunities in combination with a greater sense of community in small centres require a more diverse understanding of the small city creative economy. Entrepreneurship and business development builds on non-capitalist resources, creative community initiatives, volunteers and community networks. Fostering the creative economy in small cities requires a rethinking of creative narratives that iterate the key role of non-capitalist community resources. I illustrate this argument via a case study of the Blue Mountains Music Festival, in New South Wales, Australia. It examines the gap between creative economy aspirations of a small city government and the reality of creativity ‘on the ground’. The City of the Blue Mountains is a small urban centre on the fringes of metropolitan Sydney and regional New South Wales. Its council has recently adopted a creative industries approach to enhance local employment in line with national and metropolitan creative agendas. The Blue Mountains Music Festival was launched in response to creative economy policy more than 20 years ago, but has now lost this connection as it fails to fit current policy aspirations. The festival is, however, an effective example of how creativity in a small city unfolds, demonstrating that beyond jobs and growth are key matters of non-capitalist community networks and resources.