Strain analysis of a seismically imaged mass‐transport complex,offshore Uruguay

Strain style, magnitude and distribution within mass‐transport complexes (MTCs) are important for understanding the process evolution of submarine mass flows and for estimating their runout distances. Structural restoration and quantification of strain in gravitationally driven passive margins have been shown to approximately balance between updip extensional and downdip contractional domains; such an exercise has not yet been attempted for MTCs. We here interpret and structurally restore a shallowly buried (c. 1,500 mbsf) and well‐imaged MTC, offshore Uruguay using a high‐resolution (12.5 m vertical and 15 × 12.5 m horizontal resolution) three‐dimensional seismic‐reflection survey. This allows us to characterise and quantify vertical and lateral strain distribution within the deposit. Detailed seismic mapping and attribute analysis shows that the MTC is characterised by a complicated array of kinematic indicators, which vary spatially in style and concentration. Seismic‐attribute extractions reveal several previously undocumented fabrics preserved in the MTC, including internal shearing in the form of sub‐orthogonal shear zones, and fold‐thrust systems within the basal shear zone beneath rafted‐blocks. These features suggest multiple transport directions and phases of flow during emplacement. The MTC is characterised by a broadly tripartite strain distribution, with extensional (e.g. normal faults), translational and contractional (e.g. folds and thrusts) domains, along with a radial frontally emergent zone. We also show how strain is preferentially concentrated around intra‐MTC rafted‐blocks due to their kinematic interactions with the underlying basal shear zone. Overall, and even when volume loss within the frontally emergent zone is included, a strain difference between extension (1.6–1.9 km) and contraction (6.7–7.3 km) is calculated. We attribute this to a combination of distributed, sub‐seismic, ‘cryptic’ strain, likely related to de‐watering, grain‐scale deformation and related changes in bulk sediment volume. This work has implications for assessing MTCs strain distribution and provides a practical approach for evaluating structural interpretations within such deposits.     

Transitional impact craters on the Moon: Insight into the effect of target lithology on the impact cratering process

We studied a data set of 28 well‐preserved lunar craters in the transitional (simple‐to‐complex) regime with the aim of investigating the underlying cause(s) for morphological differences of these craters in mare versus highland terrains. These transitional craters range from 15 to 42 km in diameter, demonstrating that the transition from simple to complex craters is not abrupt and occurs over a broad diameter range. We examined and measured the following crater attributes: depth (d), diameter (D), floor diameter (D_f), rim height (h), and wall width (w), as well as the number and onset of terraces and rock slides. The number of terraces increases with increasing crater size and, in general, mare craters possess more terraces than highland craters of the same diameter. There are also clear differences in the d/D ratio of mare versus highland craters, with transitional craters in mare targets being noticeably shallower than similarly sized highland craters. We propose that layering in mare targets is a major driver for these differences. Layering provides pre‐existing planes of weakness that facilitate crater collapse, thus explaining the overall shallower depths of mare craters and the onset of crater collapse (i.e., the transition from simple to complex crater morphology) at smaller diameters as compared to highland craters. This suggests that layering and its interplay with target strength and porosity may play a more significant role than previously considered.     

Evolution and preservation potential of fluvial and transgressive deposits on the Louisiana inner shelf: understanding depositional processes to support coastal management

The barrier-island systems of the Mississippi River Delta plain are currently undergoing some of the highest rates of shoreline retreat in North America (~20 m/year). Effective management of this coastal area requires an understanding of the processes involved in shoreline erosion and measures that can be enacted to reduce loss. The dominant stratigraphy of the delta plain is fluvial mud (silts and clays), delivered in suspension via a series of shallow-water delta lobes that prograded across the shelf throughout the Holocene. Abandonment of a delta lobe through avulsion leads to rapid land subsidence through compaction within the muddy framework. As the deltaic headland subsides below sea level, the marine environment transgresses the bays and wetlands, reworking the available sands into transgressive barrier shorelines. This natural process is further complicated by numerous factors: (1) global sea-level rise; (2) reduced sediment load within the Mississippi River; (3) diversion of the sediment load away from the barrier shorelines to the deep shelf; (4) storm-induced erosion; and (5) human alteration of the littoral process through the construction of hardened shorelines, canals, and other activities. This suite of factors has led to the deterioration of the barrier-island systems that protect interior wetlands and human infrastructure from normal wave activity and periodic storm impact. Interior wetland loss results in an increased tidal prism and inlet cross-sectional areas, and expanding ebb-tidal deltas, which removes sand from the littoral processes through diversion and sequestration. Shoreface erosion of the deltaic headlands does not provide sufficient sand to balance the loss, resulting in thinning and dislocation of the islands. Abatement measures include replenishing lost sediment with similar material, excavated from discrete sandy deposits within the muddy delta plain. These sand bodies were deposited by the same cyclical processes that formed the barrier islands, and understanding these processes is necessary to characterize their location, extent, and resource potential. In this paper we demonstrate the dominant fluvial and marine-transgressive depositional processes that occur on the inner shelf, and identify the preservation and resource potential of fluvio-deltaic deposits for coastal management in Louisiana.     

The WOCE-era 3-D Pacific Ocean circulation and heat budget

To address questions concerning the intensity and spatial structure of the three-dimensional circulation within the Pacific Ocean and the associated advective and diffusive property flux divergences, data from approximately 3000 high-quality hydrographic stations collected on 40 zonal and meridional cruises have been merged into a physically consistent model. The majority of the stations were occupied as part of the World Ocean Circulation Experiment (WOCE), which took place in the 1990s. These data are supplemented by a few pre-WOCE surveys of similar quality, and time-averaged direct-velocity and historical hydrographic measurements about the equator.An inverse box model formalism is employed to estimate the absolute along-isopycnal velocity field, the magnitude and spatial distribution of the associated diapycnal flow and the corresponding diapycnal advective and diffusive property flux divergences. The resulting large-scale WOCE Pacific circulation can be described as two shallow overturning cells at mid- to low latitudes, one in each hemisphere, and a single deep cell which brings abyssal waters from the Southern Ocean into the Pacific where they upwell across isopycnals and are returned south as deep waters. Upwelling is seen to occur throughout most of the basin with generally larger dianeutral transport and greater mixing occurring at depth. The derived pattern of ocean heat transport divergence is compared to published results based on air–sea flux estimates. The synthesis suggests a strongly east/west oriented pattern of air–sea heat flux with heat loss to the atmosphere throughout most of the western basins, and a gain of heat throughout the tropics extending poleward through the eastern basins. The calculated meridional heat transport agrees well with previous hydrographic estimates. Consistent with many of the climatologies at a variety of latitudes as well, our meridional heat transport estimates tend toward lower values in both hemispheres.     

The Valley and Ridge Province of eastern Pennsylvania—stratigraphic and sedimentologic contributions and problems

Many contributions that have led to a better understanding of Appalachian geology have resulted directly from work in the folded Appalachian Mountain and Great Valley sections of the Valley and Ridge physiographic province of eastern Pennsylvania. Disagreements have been common since H.D. Rogers first described the geology of the area in 1858. Many differing opinions still exist regarding the stratigraphy, structural geology, geomorphology, and glacial geology. The rocks in the area, which range from Middle Ordovician to Late Devonian in age, are more than 25000 feet (7620 m) thick. This diversified group of sedimentary rocks was deposited in many different environments, ranging from deep sea, through neritic and tidal, to alluvial. In general, the Middle Ordovician through Lower Devonian strata are a sedimentary cycle related to the waxing and waning of Taconic tectonism. The sequence began with a greywacke-argillite suite (Martinsburg Formation) representing synorogenic basin deepening. This was followed by basin filling and pro-gradation of a sandstone-shale clastic wedge (Shawangunk Formation and Bloomsburg Red Beds) derived from the erosion of the mountains that were uplifted during the Taconic orogeny. The sequence ended with deposition of many thin units of carbonate, sandstone, and shale on a shelf marginal to a land area of low relief. Another tectonic-sedimentary cycle, related to the Acadian orogeny, began with deposition of Middle Devonian rocks. Deep-water shales (Marcellus Shale) preceded shoaling (Mahantango Formation) and turbidite sedimentation (Trimmers Rock Formation) followed by another molasse (Catskill Formation).     

Heat transfer and thermal boundary layers in high amplitude annulus waves

Abstract

The heat transfer by a rotating, differentially-heated annulus of fluid is measured throughout the high amplitude wave regime. Only Δr_w T was varied (although v(T₁₅ ).K(T₁₅ ) varied by 46%), and it is found that Nu = C₁(λ)Ra^? away from the symmetry and low amplitude to wave transition curves and this is independent of ω. (λ is the wavelength.) On the wave side of these transition curves a region exists in which Nu (symmetry) λ Nu λ C₁(λ)Ra^?. The local heat transfer rate also varies strongly with wave phase.

Using a selection of measured internal thermal fields in the steady, high amplitude wave regime, the side-wall thermal boundary layer structure is examined. It is found that Nu, = C₂·Gr₂ ^A2; both C ₂ and A ₂ are independent of ω and λ to first order. For the time mean profiles, A ₂ ≈ 0.25; in the high heat transfer portion of the wave A ₂ < ¼ and in the low heat transfer portion of the wave A ₂ > ?. These relations hold over most of the vertical extent of the side walls. The deviations of the boundary layers from the above behavior which occur on the remainder of the walls is illustrated. The average thicknesses of the wall boundary layers ∞ Ra^?¼ except in that phase of the wave in which the wall to mid-gap temperature difference is the largest.     

Passive microwave remote sensing of the historic February 2010 snowstorms in the Middle Atlantic region of the USA

The snowfall in the Baltimore/Washington metropolitan area during the winter of 2009/2010 was unprecedented and caused serious snow‐related disruptions. In February 2010, snowfall totals approached 2 m, and because maximum temperatures were consistently below normal, snow remained on the ground the entire month. One of the biggest contributing factors to the unusually severe winter weather in 2009/2010, throughout much of the middle latitudes, was the Arctic Oscillation. Unusually high pressure at high latitudes and low pressure at middle latitudes forced a persistent exchange of mass from north to south. In this investigation, a concerted effort was made to link remotely sensed falling snow observations to remotely sensed snow cover and snowpack observations in the Baltimore/Washington area. Specifically, the Advanced Microwave Scanning Radiometer onboard the Aqua satellite was used to assess snow water equivalent, and the Advanced Microwave Sounding Unit‐B and Microwave Humidity Sounder were employed to detect falling snow. Advanced Microwave Scanning Radiometer passive microwave signatures in this study are related to both snow on the ground and surface ice layers. In regard to falling snow, signatures indicative of snowfall can be observed in high frequency brightness temperatures of Advanced Microwave Sounding Unit‐B and Microwave Humidity Sounder. Indeed, retrievals show an increase in snow water equivalent after the detection of falling snow. Yet, this work also shows that falling snow intensity and/or the presence of liquid water clouds impacts the ability to reliably detect snow water equivalent. Moreover, changes in the condition of the snowpack, especially in the surface features, negatively affect retrieval performance. Copyright © 2011. This article is a U.S. Government work and is in the public domain in the USA.     

The Congo Basin forests in a changing climate: Policy discourses on adaptation and mitigation (REDD+)

This paper discusses the discourses on climate change adaptation and mitigation that are currently at the forefront in the Congo Basin. On mitigation, the forests have enormous opportunities to contribute to the reducing emissions from deforestation and forest degradation (REDD+) mechanism. But the forest itself and its multiple dependent societies and sectors need to adapt to potential climate risks. Hence, actors are debating the design of climate change policy in the forest sector. Theoretically, we combine the agency-focus of frame analysis and discourse theory to analyze how different agents hold frames on climate change adaptation and mitigation policies in the region. This paper draws upon interviews with 103 different actors from government, international organizations, non-governmental organizations, research institutions and private sector in three countries: Cameroon, Central African Republic (CAR) and Democratic Republic of Congo (DRC). Three discourses were found on policy response to climate change in the forest sector: mitigation policy only, separated policy on adaptation and mitigation, and an integrated policy on adaptation and mitigation. The various frames articulated around each discourse by the coalitions include elements of: costs and benefits, scale of operation, effectiveness, financial resources and implementation mechanisms. Overall, the mitigation discourse, through its mix of actors, resources and interests seems to be stronger than the adaptation discourse. The paper finally outlines a number of implications of the discourses for policy design.     

Stratigraphy,geochemistry, and thermoluminescence ages of lower Mississippi Valley loess

Four periods of loess deposition in the Lower Mississippi Valley can be identified on the basis of geochemical and mineralogical criteria, radiocarbon dating, and thermoluminescence dating. These are designated Loess Units 1,2,3, and 4 in order of increasing age. Carbonate-rich Unit 1 loess comprises more than 70 per cent of the thickness of the loess profiles. ¹⁴C and TL dates indicate this loess was deposited between 9 000 and 20 000 years ago. A maximum sedimentation rate of 2.17 mm yr^?1 has been recorded near Vicksburg just after the last Laurentide glacial maximum, between 17 190 and 15 580 years ago. The Unit 2 loess, which is thin and partly decalcified, was deposited slowly between about 25 000 and 20 000 years ago. The Unit 3 and Unit 4 loess formations, which are both highly weathered, have yielded TL ages of 76 000–85 000 years and 119 000- > 132 000 years, suggesting they were deposited during the Altonian Substage of the early Wisconsinan and the Illinoian glacial stage respectively. The four loess units are stratigraphically equivalent to the Peoria, Farmdale, Roxana, and Loveland loess formations previously recognized in Illinois. The source of dust in both areas was glacial outwash in the Mississippi Valley. During interglacials and interstadials, when the supply of glacial debris was reduced and the Mississippi River changed from a braided to a meandering regime, dust sedimentation in southern Mississippi virtually ceased, allowing weathering and pedogenesis to proceed.