Evaluation of bioremediation strategies of a controlled oil release in a wetland

A controlled petroleum release was conducted to evaluate bioremediation in a wetland near Houston, Texas. The 140-day study was conducted using a randomized, complete block design to test three treatments with six replicates per treatment. The three treatment strategies were inorganic nutrients, inorganic nutrients with an alternative electron acceptor, and a no-action oiled control. Samples were analyzed for petroleum chemistry and inorganic nutrients. These results are discussed in the context of our related research involving toxicology and microbiology at the site during the experiment. To evaluate biodegradation, the targeted compounds were normalized to the conservative compound C3017alpha, 21beta-[H]hopane, thus reducing the effects of spatial heterogeneity and physical transport. The two biostimulation treatments demonstrated statistically-higher rates of biodegradation than the oiled no-action control. For the majority of the experiment, target nutrient levels were maintained. Further research may be warranted to optimize these bioremediation strategies as well as evaluating additional treatment strategies for wetlands and other shoreline systems.     

Measurement of copper release rates from antifouling paint under laboratory and in situ conditions: implications for loading estimation to marine water bodies

The release of biocides, such as copper (Cu), from antifouling (AF) coatings on vessel hulls represents a significant proportion of overall Cu loading in those harbors and estuaries where substantial numbers of small craft or large vessels are berthed. Copper release rates were measured on several self-polishing, tin-free coatings and an ablative Cu reference coating applied to steel panels using three measurement methods. The panels were exposed in natural seawater in San Diego Bay, and release rates were measured both in the laboratory and field over 2 years. Results with the static (20 cm x 30 cm) panels indicated that Cu release rates were initially high (25-65 microg Cu cm(-2)day(-1)), with a large range of values between paint types. Release rates declined to substantially lower rates (8-22 microg cm(-2)day(-1)) with reduced variability within 2 months. Release rates continued to decrease over time for approximately 6 months when relatively constant release rates were observed for most coatings. Over time, relative differences in Cu release rates measured by three exposure methods decreased, with all coatings exhibiting similar behavior toward the end of the study. Lowest overall Cu release rates were observed with the self-polishing experimental paint no. 7 in static-dynamic and in situ treatments. The highest periodic release rates were measured from panels that experienced periods of both static and dynamic exposure (8.7 ms(-1) rotation). The lowest release rates were measured from panels that experienced static, constant depth exposure, and where release rates were evaluated in situ, using a novel diver-deployed measurement system. Results from this in situ technique suggests that it more closely reflects actual Cu release rates on vessel hulls measured with intact natural biofilms under ambient conditions than measurements using standardized laboratory release rate methods. In situ measurements made directly on the AF surface of vessels demonstrated typically lower release rates than from the panel studies, averaging 8.2 microg cm(-2)day(-1) on pleasure craft, and 3.8 microg cm(-2)day(-1) on Navy vessels. The data suggest that the presence of an established biofilm likely serves to moderate the release of Cu from field-exposed antifouling coatings both on panels and hull surfaces.     

MTBE and gasoline hydrocarbons in ground water of the United States

The occurrence of methyl tert-butyl ether (MTBE) and gasoline hydrocarbons was examined in three types of studies of ground water conducted by the U.S. Geological Survey: major aquifer surveys, urban land-use studies, and agricultural land-use studies. The detection frequency of MTBE was dependent on the study type, with the highest detection frequency in urban land-use studies. Only 13 ground water samples from all study types, or 0.3%, had concentrations of MTBE that exceeded the lower limit of the U.S. EPA's Drinking-Water Advisory. The detection frequency of MTBE was highest in monitoring wells located in urban areas and in public supply wells. The detection frequency of any gasoline hydrocarbon also was dependent on study type and generally was less than the detection frequency of MTBE. The probability of detecting MTBE in ground water was strongly associated with population density, use of MTBE in gasoline, and recharge. Ground water in areas with high population density, in areas where MTBE is used as a gasoline oxygenate, and in areas with high recharge rates had a greater probability of MTBE occurrence. Also, ground water from public supply wells and shallow ground water underlying urban land-use areas had a greater probability of MTBE occurrence compared to ground water from domestic wells and ground water underlying rural land-use areas. The probability of detecting MTBE in ground water was weakly associated with the density of leaking underground storage tanks, soil permeability, and aquifer consolidation, and only concentrations of MTBE >0.5 microg/L were associated with dissolved oxygen.     

Cyanobacterial blooms in estuarine ecosystems: characteristics and effects on Laeonereis acuta (Polychaeta, Nereididae)

In January of 2003, a cyanobacterial bloom in the Patos' Lagoon (Southern Brazil) (32 degrees 05'S-52 degrees 12'W) was observed. Water samples were taken to identify the composition and abundance of the bloom, as well as the occurrence of toxins. The effects of this occurrence on the estuarine worm Laeonereis acuta (Polychaeta, Nereididae) was also evaluated. Predominance of cyanobacteria, particularly Anabaena trichomes ( approximately 2.5.10(6) individuals per liter) was observed, and low concentrations of microcystins and anticholinesterasic toxins were detected. Augmented levels of lipid hydroperoxides (LPO) and glutathione-S-transferase activity, and lowering of total protein content were also observed in organisms collected during the bloom event. Although non-toxic, the cyanobacterial bloom could augment the cycle of hyper-oxygenation and hypoxia in the water. During hyperoxia, L. acuta, an oxyconformer, should consume more oxygen, thus augmenting the rate of reactive oxygen species generation. A repeated cycle of hyper-oxygenation and hypoxia would finally induce oxidative stress, as evidenced by the high levels of LPO and glutathione-S-transferase activity.     

Microbial modulation in the biomass and toxin production of a red-tide causing alga

The effect of S₁₀, a strain of marine bacteria isolated from sediment in the Western Xiamen Sea, on the growth and paralytic shellfish poison (PSP) production in the alga Alexandrium tamarense (A. tamarense) was studied under controlled experimental conditions. The results of these experiments have shown that the growth of A. tamarense is obviously inhibited by S₁₀ at high concentrations, however no evident effect on its growth was observed at low concentrations. Its PSP production was also inhibited by S₁₀ at different concentrations, especially at low concentrations. The toxicity of this strain of A. tamarense is about (0.95–12.14) × 10⁻⁶ MU/cell, a peak toxicity value of 12.14 × 10⁻⁶ MU/cell appeared on the 14th day, after which levels decreased gradually. The alga grew well in conditions of pH 6–8 and salinities of 20–34‰. The toxicity of the alga varied markedly at different pH and salinity levels. Toxicity decreased as pH increased, while it increased with salinity and reached a peak value at a salinity of 30‰, after which it declined gradually. S₁₀ at a concentration of 1.02 × 10⁹ cells/ml inhibited growth and the PSP production of A. tamarense at different pH and salinity levels. S₁₀ had the strongest inhibitory function on the growth of A. tamarense under conditions of pH 7 and a salinity of 34‰. The best inhibitory effect on PSP production by A. tamarense was at pH 7, this inhibitory effect on PSP production did not relate to salinity. Interactions between marine bacteria and A. tamarense were also investigated using the flow cytometer technique (FCM) as well as direct microscope counting. S₁₀ was identified as being a member of the genus Bacillus, the difference in 16S rDNA between S₁₀ and Bacillus halmapalus was only 2%. The mechanism involved in the inhibition of growth and PSP production of A. tamarense by this strain of marine bacteria, and the prospect of using it and other marine bacteria in the bio-control of red-tides was discussed.     

Remediation of NAPL source zones: lessons learned from field studies at Hill and Dover AFB

Innovative remediation studies were conducted between 1994 and 2004 at sites contaminated by nonaqueous phase liquids (NAPLs) at Hill and Dover AFB, and included technologies that mobilize, solubilize, and volatilize NAPL: air sparging (AS), surfactant flushing, cosolvent flooding, and flushing with a complexing-sugar solution. The experiments proved that aggressive remedial efforts tailored to the contaminant can remove more than 90% of the NAPL-phase contaminant mass. Site-characterization methods were tested as part of these field efforts, including partitioning tracer tests, biotracer tests, and mass-flux measurements. A significant reduction in the groundwater contaminant mass flux was achieved despite incomplete removal of the source. The effectiveness of soil, groundwater, and tracer based characterization methods may be site and technology specific. Employing multiple methods can improve characterization. The studies elucidated the importance of small-scale heterogeneities on remediation effectiveness, and fomented research on enhanced-delivery methods. Most contaminant removal occurs in hydraulically accessible zones, and complete removal is limited by contaminant mass stored in inaccessible zones. These studies illustrated the importance of understanding the fluid dynamics and interfacial behavior of injected fluids on remediation design and implementation. The importance of understanding the dynamics of NAPL-mixture dissolution and removal was highlighted. The results from these studies helped researchers better understand what processes and scales are most important to include in mathematical models used for design and data analysis. Finally, the work at these sites emphasized the importance and feasibility of recycling and reusing chemical agents, and enabled the implementation and success of follow-on full-scale efforts.