A Practical Approach to Shallow Petroleum Hydrocarbon Recovery

A practical pumping system for the recovery of free petroleum hydrocarbon product from shallow aquifers has been developed. The system is patterned after suction-lift well point dewatering systems used in the construction industry. Pumping equipment consists of double-diaphragm suction-lift pumps manifolded to up to four recovery wells. Recovery wells are constructed with screens below the water table and sealed wellheads to enable vacuum-assisted flow of fluids to the wells. Pumps utilized are pneumatically driven, can be pumped dry without damage, induce a vacuum on the wells when pumping dry, and provide delivery of pumped fluids to fluid separation and storage facilities. The system is effective in both low- and high-permeability formations due to the wide range in available pumping rates afforded by the pumps.     

Acquisition and processing of data for isotope-ratio-monitoring mass spectrometry

Methods are described for continuous monitoring of signals required for precise analyses of 13C, 18O, and 15N in gas streams containing varying quantities of CO2 and N2. The quantitative resolution (i.e. maximum performance in the absence of random errors) of these methods is adequate for determination of isotope ratios with an uncertainty of one part in 10(5); the precision actually obtained is often better than one part in 10(4). This report describes data-processing operations including definition of beginning and ending points of chromatographic peaks and quantitation of background levels, allowance for effects of chromatographic separation of isotopically substituted species, integration of signals related to specific masses, correction for effects of mass discrimination, recognition of drifts in mass spectrometer performance, and calculation of isotopic delta values. Characteristics of a system allowing off-line revision of parameters used in data reduction are described and an algorithm for identification of background levels in complex chromatograms is outlined. Effects of imperfect chromatographic resolution are demonstrated and discussed and an approach to deconvolution of signals from coeluting substances described.     

BASIC: Baltic Sea cyanobacteria. An investigation of the structure and dynamics of water blooms of cyanobacteria in the Baltic Sea—responses to a changing environment

The blooms of cyanobacteria that develop each summer in the Baltic Sea are composed of two functional groups, namely the small-sized picocyanobacteria (Synechococcus sp.) and the larger, colony-forming, filamentous N₂-fixing cyanobacteria. The former encompassed both red (phycoerythrin-rich) and blue-green (phycocyanin-rich) species. The majority of the picocyanobacteria measured less than 1 μm and this size fraction comprised as much as 80% of the total cyanobacterial biomass and contributed as much as 50% of the total primary production of a cyanobacterial bloom. The picocyanobacteria are incapable of fixing N₂, do not possess gas vesicles and are not toxic. However, a small filamentous Pseudanabaena sp. that could potentially fix N₂ was isolated from the picocyanobacteria fraction. The larger cyanobacteria may form surface scums because they possess gas vesicles that make them buoyant. Although their biomass was less than the picocyanobacteria, they therefore form the more conspicuous and nuisance-forming part of the bloom. The larger cyanobacteria were composed mainly of three different species: Nodularia spumigena, Aphanizomenon flos-aquae and Anabaena sp. These all belong to the heterocystous, N₂-fixing cyanobacteria. N. spumigena and A. flos-aquae were the dominant species; only N. spumigena was toxic. Although individual Nodularia filaments showed a range of different phenotypes, they all belong to one species as judged from 16S rDNA sequencing. Through determination of the genotypes of many individual Nodularia filaments, it was shown that this population was not clonal and that horizontal exchange of genetic information occurs. N. spumigena and A. flos-aquae were different with respect to their photosynthetic and N₂-fixing potentials. Depending on prevailing environmental conditions, these differences would promote the proliferation of one species over the other and hence would determine overall the toxicity of a bloom. Daily integrals of photon irradiance rather than temperature determined the onset of bloom formation. During a bloom, the diazotrophic cyanobacteria fixed N₂ at a rate that was 10–20% in excess of their own demand for N. Picocyanobacteria assimilated most of this excess N as shown by ¹⁵N incorporation. During bloom conditions, the diazotrophic cyanobacteria met about 50% of the N demand of the total cyanobacterial community. The picocyanobacteria were predominantly N-limited while the diazotrophic cyanobacteria were probably iron limited. These findings allow us to understand the formation of toxic cyanobacterial blooms and also to develop tools to predict bloom formation.     

A multimetric-index approach using fisheries data to assess fish assemblage structure in relation to salinity gradient in a tropical West African estuary

This study examines the effects of increasing salinity on fish assemblage structure in the Casamance Estuary, Senegal, using a series of indices. The study data were derived from commercial fishery surveys conducted between April and July 2005. Analysis of within-trophic-group diversity in the Casamance Estuary shows a significant drop in the diversity of apex predators in the upper, more saline reaches of the estuary. By contrast, primary consumers adapted well to salinity changes and exhibited higher taxonomic diversity in the upper reaches of the estuary than in the lower reaches. The findings also indicate decreases in average sizes of the landed species and the trophic levels among fish catches in the direction of the upper reaches. However, the catch per unit effort (CPUE) was globally higher in the upstream area of the estuary as compared with the downstream area. This increasing CPUE trend from the lower towards the upper reaches is attributed to (i) the high primary productivity in the upper Casamance Estuary; (ii) the increasing abundance of euryhaline fish species in an upstream direction; and (iii) ‘telescoping’ of the food chain through the presence of mostly herbivorous fishes in the upper reaches. Such a situation likely facilitated high fish production in the upstream area of the estuary, though multimetric indices indicated unfavourable living conditions for many fish taxa in this area.     

Classification of marine bioregions on the east coast of South Africa

Marine bioregional planning requires a meaningful classification and spatial delineation of the ocean environment using biological and physical characteristics. The relative inaccessibility of much of the ocean and the paucity of directly measured data spanning entire planning regions mean that surrogate data, such as satellite imagery, are frequently used to develop spatial classifications. However, due to a lack of appropriate biological data, these classifications often rely on abiotic variables, which act as surrogates for biodiversity. The aim of this study was to produce a fine-scale bioregional classification, using multivariate clustering, for the inshore and offshore marine environment off the east coast of South Africa, adjacent to the province of KwaZulu-Natal and out to the boundary of the exclusive economic zone (EEZ), 200 nautical miles offshore. We used remotely sensed data of sea surface temperature, chlorophyll a and turbidity, together with interpolated bathymetry and continental-slope data, as well as additional inshore data on sediments, seabed oxygen and bottom temperature. A multivariate k-means analysis was used to produce a fine-scale marine bioregionalisation, with three bioregions subdivided into 12 biozones. The offshore classification was primarily a pelagic bioregionalisation, whereas the inshore classification (on the continental shelf) was a coupled benthopelagic bioregionalisation, owing to the availability of benthic data for this area. The resulting classification was used as a base layer for a systematic conservation plan developed for the province, and provided the methods for subsequent planning conducted for the entire South African EEZ. Validation of the classification is currently being conducted in marine research programmes that are sampling benthic biota and habitats in a sampling design stratified according to the biozones delineated in this study.     

A method for estimating the sub-wavelength sway of a sonar towfish

The essentially random motion of the towfish in a side scan sonar system limits the fidelity of the resultant image. Although corrective techniques have been developed to deal with the gross departures from a set of regular amplitude versus range samples along a straight locus as well as the gross rotational errors, sub-wavelength displacement errors are mostly ignored. This paper suggests a technique to estimate the appropriate displacement errors from the statistics of the measured data when there are few or no strong scatterers on an otherwise featureless sea floor. As it happens, the proposed technique is somewhat similar to an existing optical technique but is new to underwater sonar. We show in a series of simulated trials that it is possible to estimate the resultant sub-wavelength horizontal departure from a straight locus under some (hopefully) realistic operating conditions     

Sensitivity and cost considerations for the detection and eradication of marine pests in ports

Port surveys are being conducted in Australia, New Zealand and around the world to confirm the presence or absence of particular marine pests. The most critical aspect of these surveys is their sensitivity-the probability that they will correctly identify a species as present if indeed it is present. This is not, however, adequately addressed in the relevant national and international standards. Simple calculations show that the sensitivity of port survey methods is closely related to their encounter rate-the average number of target individuals expected to be detected by the method. The encounter rate (which reflects any difference in relative pest density), divided by the cost of the method, provides one way to compare the cost-effectiveness of different survey methods. The most cost-effective survey method is site- and species-specific but, in general, will involve sampling from the habitat with the highest expected population of target individuals. A case study of Perna viridis in Trinity Inlet, Cairns, demonstrates that plankton trawls processed with gene probes provide the same level of sensitivity for a fraction of the cost associated with the next best available method-snorkel transects in bad visibility (secchi depth=0.72 m). Visibility and the adult/larvae ratio, however, are critical to these arguments. If visibility were good (secchi depth=10 m), the two approaches would be comparable. Diver deployed quadrats were at least three orders of magnitude less cost-effective in this case study. It is very important that environmental managers and scientists perform sensitivity calculations before embarking on port surveys to ensure the highest level of sensitivity is achieved for any given budget.     

88小时:美国地质调查局国家地震信息中心对2011年3月11日Mw9.0日本地震的响应

引言 2011年3月11日日本本州岛东海岸附近海域发生的M9．0地震（Tohoku earthquake,以下称“东日本大地震”——译者注）及其引发的海啸造成数以万计的人员死亡,造成的财产损失可能超过1万亿美元,这是有历史记录以来最严重的自然灾害之一。     

Organic sedimentary deposits in Titan’s dry lakebeds: Probable evaporite

We report the discovery of organic sedimentary deposits at the bottom of dry lakebeds near Titan’s north pole in observations from the Cassini Visual and Infrared Mapping Spectrometer (VIMS). We show evidence that the deposits are evaporitic, making Titan just the third known planetary body with evaporitic processes after Earth and Mars, and is the first that uses a solvent other than water.