南海海面高度变化及其与太平洋上涛动信号的关系

本文使用循环平稳经验正交函数(CSEOF)方法分析了南海海面高度(SCS-SSH)的时空变化模态,并对它们与太平洋海盆尺度振荡的关系进行了探讨分析。结果表明,SCS-SSH的第一个CSEOF模态是季节变化模态,其变化强度受到一个与厄尔尼诺-南方涛动(ENSO)有关的低频信号的调制,即在厄尔尼诺期间季节变化的幅度减弱(最大可降低30%,1997/98)而在拉尼娜期间季节变化增强。SCS-SSH的第二个CSEOF模态是年际-年代际尺度的低频变化模态,其空间模态的月与月之间的差异微弱,而时间模态和太平洋年代际振荡(PDO)指数高度相关。然后,我们使用独立成分分析(ICA)方法提取了太平洋中的五个主要振荡成分,并检验了它们对SCS-SSH变化的各自影响。分析表明,纯粹的ENSO模态(类似于太平洋东部型ENSO)对SCS-SSH的低频变化的影响比较微弱,而ENSO的红化模态(类似于太平洋中部型ENSO)对SCS-SSH的低频变化具有明显影响。由于ENSO的红化模态是PDO信号的一个主要成分,这一结果解释了为什么在影响SCS-SSH的低频变化上PDO比ENSO更重要。径向鞍型振荡模态、黑潮延伸体处的增温模态、以及赤道的降温模态也由ICA方法提取出来,但它们对SCS-SSH低频变异的影响微弱。进一步的分析表明,太平洋的涛动信号可能以不同的方式来影响南海海面高度变化和海表温度变化。     

利用浅海的声传播损失反演海面风速

声信号在浅海环境传播时,经过海面风浪的不断散射,传播损失会相应改变。本文通过分析声传播损失计算海面波高,利用风浪充分成长时波高与风速的关系,对海面风速进行反演,并针对声速剖面在有无跃层两种情况下反演过程的异同进行讨论。利用模拟仿真与2013年黄海声传播实验数据对其进行了验证,结果表明此方法是有效的。     

正弦激励下零浮力海洋拖缆动力特性与实验研究

海洋地震拖缆是海洋油气资源勘探中的关键设备,为研究海洋地震拖缆的动力特性及其在不同频率正弦激励干扰下的动力响应,建立了零浮力拖缆的数学模型,设计了一套完整的实验方案,通过弹性测力机构放大张力信号以排除环境干扰,测量了不同拖曳速度与激振频率条件下拖缆首部的张力变化及缆上位移响应情况,初步分析了正弦激励作用下零浮力拖缆的动力学响应。弹性测力机构具有良好的线性度与可重复性,拖缆受到的水阻力与拖曳速度的平方成正比,数值计算与实验结果对比验证了数学模型的正确性,初步分析了正弦激励作用下零浮力拖缆的动力学响应。     

һ�ּ��㲹����С�������򻯲��������Ż�����

??????????????С????????У??????Ч????????????????????????????????μ??????С????????????????????彻??????L??????????????????????????????????????????????????????????????????????????Ч???????     

�������編ʱ��InSAR�������У�������о�

????????λ???????????????3????????????????????編???н??????????????????????????????????2007~2010?????20??ENVISAT ASAR?????÷????????????????????Э??????????У?????????????????й????????????Э?????????????????????3.1 mm²??????0.6mm²????????80%??e-folding???????????1.5 km?????0.21 km????????86%????????編??????Ч??У????????е??????λ?????     

���������ʷ��뷽����ƴ�ӵĸ߾�������ת������ģ�͵Ľ���

???????????????????????????????????????????????????????????????й?????????????????????????б?????JP+1????????????÷??????????ν???????????е????????Ч????????????????????Ч????????????????????????????????????????????÷?????????????????     

Research of Marine Sensor Web Based on SOA and EDA

A great deal of ocean sensor observation data exists, for a wide range of marine disciplines, derived from in situ and remote observing platforms, in real-time, near-real-time and delayed mode. Ocean monitoring is routinely completed using sensors and instruments. Standardization is the key requirement for exchanging information about ocean sensors and sensor data and for comparing and combining information from different sensor networks. One or more sensors are often physically integrated into a single ocean ‘instrument' device, which often brings in many challenges related to diverse sensor data formats, parameters units, different spatiotemporal resolution, application domains, data quality and sensors protocols. To face these challenges requires the standardization efforts aiming at facilitating the so-called Sensor Web, which making it easy to provide public access to sensor data and metadata information. In this paper, a Marine Sensor Web, based on SOA and EDA and integrating the MBARI's PUCK protocol, IEEE 1451 and OGC SWE 2.0, is illustrated with a five-layer architecture. The Web Service layer and Event Process layer are illustrated in detail with an actual example. The demo study has demonstrated that a standard-based system can be built to access sensors and marine instruments distributed globally using common Web browsers for monitoring the environment and oceanic conditions besides marine sensor data on the Web, this framework of Marine Sensor Web can also play an important role in many other domains' information integration.     

Abundance and Distribution of Fatty Acids in Sediments of the South Mid-Atlantic Ridge

Sediment samples obtained from the South Mid-Atlantic Ridge were studies by gas chromatography-mass spectrometer(GC-MS) for the abundance and distributions of total fatty acids(TFAs). Approximately 34 fatty acids were identified, with the chain-lengths ranging from C12 to C30. The total concentrations of TFAs(∑TFA) ranged from 7.15 to 30.09 μg g-1 dry sediment, and ∑TFA was weakly correlated with bitumen content(R2 = 0.69). The ∑TFA of samples around hydrothermal areas were significantly higher than that of samples away from hydrothermal areas, indicating intense primary production and large biomass in the hydrothermal areas, and suggesting a close relationship between hydrothermal activity and ∑TFA of samples. The characteristics of the TFA composition in the present study are rich in monounsaturated fatty acids and lacking in polyunsaturated fatty acids, and the ratios between the concentrations of monounsaturated fatty acids and ΣTFAs in samples close to the hydrothermal areas, are about 0.8, but for samples far from the hydrothermal areas, they are only about 0.5. Several fatty acids(e.g., a/i C15:0 and C16:1ω7), which are signature biomarkers for sulfur-metabolizing bacteria, show the same distribution trend as ∑TFA of samples, further highlighting the close relationship between fatty acid content and hydrothermal activity and/or hydrothermal communities. The metabolic activities of hydrothermal communities, especially those of microorganisms, are likely the main source of fatty acids in samples.     

结合张量与互信息的混合模型多模态图像配准方法

多模态图像之间存在显著的非线性强度差异,并且图像会因为噪声而退化,因此,多模态图像自动配准是一项具有挑战性的任务.为了解决这两个问题,本文提出一种多模态图像自动配准方法,该方法分为预配准和精配准两个阶段.在预配准阶段,通过改进SIFT算法来大致对齐多模态图像.在精配准阶段,首先,利用块Harri s检测器在预配准后的参考图上提取均匀分布的特征点.然后,通过各向异性结构张量捕捉多模态图像中的结构信息来构建特征描述符,该特征描述符对噪声具有稳健性.更进一步,本文结合张量方向平行度和梯度互信息提出了一种相似度准则(tensor orientation and mutual information,TOMI).最后,本文用多种模态图像(包括Optical,LiDAR,SAR和Map)来评估提出的方法.试验结果表明,本文提出的方法对非线性强度变化和噪声具有较好的稳健性,并且匹配效果优越.