通过断层气氢探测新郑-太康断裂的浅层位置

新郑-太康断裂隐伏于河南省东部平原下,是一条规模较大的北西向断裂带,曾于2010年发生太康4.7级地震,确定该断裂准确的浅层位置对防震减灾具有重要意义。根据深部石油勘探资料,应用德尔格X-am 7000型多气体检测仪,在新郑地区布置2条与断裂走向近垂直的地球化学测线进行土壤氢气浓度测试,结果发现解放路和马庄村-前宫村测线异常点位处氢气浓度分别为背景值的16-33倍和40-50倍。2条H₂浓度曲线同步解释出一条倾向变化、宽约150m的走滑断裂带,位置与石油勘探资料吻合良好。此次研究表明利用断层气氢探测隐伏断裂的浅层位置在该区具有较好的可行性。     

Shales in the Qiongzhusi and Wufeng–Longmaxi Formations: a rock-physics model and analysis of the effective pore aspect ratio

The shales of the Qiongzhusi Formation and Wufeng–Longmaxi Formations at Sichuan Basin and surrounding areas are presently the most important stratigraphic horizons for shale gas exploration and development in China. However, the regional characteristics of the seismic elastic properties need to be better determined. The ultrasonic velocities of shale samples were measured under dry conditions and the relations between elastic properties and petrology were systemically analyzed. The results suggest that 1) the effective porosity is positively correlated with clay content but negatively correlated with brittle minerals, 2) the dry shale matrix consists of clays, quartz, feldspars, and carbonates, and 3) organic matter and pyrite are in the pore spaces, weakly coupled with the shale matrix. Thus, by assuming that all connected pores are only present in the clay minerals and using the Gassmann substitution method to calculate the elastic effect of organic matter and pyrite in the pores, a relatively simple rock-physics model was constructed by combining the self-consistent approximation (SCA), the differential effective medium (DEM), and Gassmann’s equation. In addition, the effective pore aspect ratio was adopted from the sample averages or estimated from the carbonate content. The proposed model was used to predict the P-wave velocities and generally matched the ultrasonic measurements very well.     

Study on the simulation of acoustic logging measurements in horizontal and deviated wells

The conventional acoustic logging interpretation method, which is based on vertical wells that penetrate isotropic formations, is not suitable for horizontal and deviated wells penetrating anisotropic formations. This unsuitability is because during horizontal and deviated well drilling, cuttings will splash on the well wall or fall into the borehole bottom and form a thin bed of cuttings. In addition, the high velocity layers at different depths and intrinsic anisotropy may affect acoustic logging measurements. In this study, we examine how these factors affect the acoustic wave slowness measured in horizontal and deviated wells that are surrounded by an anisotropic medium using numerical simulation. We use the staggered-grid finite difference method in time domain (FDTD) combined with hybrid-PML. First, we acquire the acoustic slowness using a simulated array logging system, and then, we analyze how various factors affect acoustic slowness measurements and the differences between the effects of these factors. The factors considered are high-velocity layers, thin beds of cuttings, dipping angle, formation thickness, and anisotropy. The simulation results show that these factors affect acoustic wave slowness measurements differently. We observe that when the wavelength is much smaller than the distance between the borehole wall and high velocity layer, the true slowness of the formation could be acquired. When the wavelengths are of the same order (i.e., in the near-field scenarios), the geometrical acoustics theory is no longer applicable. Furthermore, when a thin bed of cuttings exists at the bottom of the borehole, Fermat's principle is still applicable, and true slowness can be acquired. In anisotropic formations, the measured slowness changes with increments in the dipping angle. Finally, for a measurement system with specific spacing, the slowness of a thin target layer can be acquired when the distance covered by the logging tool is sufficiently long. Based on systematical simulations with different dipping angles and anisotropy in homogenous TI media, slowness estimation charts are established to quantitatively determine the slowness at any dipping angle and for any value of the anisotropic ratio. Synthetic examples with different acoustic logging tools and different elastic parameters demonstrate that the acoustic slowness estimation method can be conveniently applied to horizontal and deviated wells in TI formations with high accuracy.     

滇西南地区南汀河断裂带三维深部电性结构及其孕震环境

南汀河断裂带为滇西南地区活动断裂体系中规模最大的一条北东向断裂,其构造活动及地震危险性一直备受关注.本文基于覆盖云南境内南汀河断裂带的大地电磁测深宽频带阵列数据,利用大地电磁三维反演解释技术,首次获得了南汀河断裂带的精细三维深部电性结构.在上地壳深度,南汀河断裂带西南段与中段的电性结构表现出沿构造走向的高导条带特征,北东段表现为高阻结构.该高阻结构可能为临沧—勐海花岗岩体的电性反映,指示南汀河断裂可能未切穿该花岗岩带.在中下地壳深度,南汀河断裂带西南段存在大范围高导层,北东段则表现为整体性的高阻地壳,因此南汀河断裂北东段可能具有发生强震的介质结构背景.南汀河断裂带西南段的耿马地震区深部呈现北东向与北北西向的"X"型高导构造样式,该高导结构以南存在一个显著高阻异常体,1988年耿马M_S7.2地震以及2015年沧源M_S5.5级地震均发生于该高阻体与"X"型高导条带的电性边界.青藏高原东南缘绕东构造结流入滇西地区的中下地壳流可能受到南汀河断裂北东段中下地壳高阻体的阻挡而呈分流式分布于保山地块以及澜沧江断裂以东.     

Potential wind erosion rate response to climate and land‐use changes in the watershed of the Ningxia–Inner Mongolia reach of the Yellow River,China, 1986–2013

Climate and land‐use changes could strongly affect wind erosion and in turn cause a series of environmental problems. Thus, the objective of this study was to assess potential wind erosion rate (PWER) response to climate and land‐use changes in the watershed of the Ningxia–Inner Mongolia Reach of the Yellow River (NIMRYR), China. The watershed of NIMRYR suffers from serious wind erosion hazards, and over recent decades, wind erosion intensity and distribution has changed, following climate and land‐use changes. To understand these processes in the NIMRYR watershed, the Integrated Wind Erosion Modelling System (IWEMS) and the Revised Wind Erosion Equation (RWEQ) were used to calculate the PWER under different climate conditions and land‐use scenarios, and to assess the influences of climate and land‐use changes on the PWER. The results show the PWER in the whole watershed had a significant declining trend from 1986 to 2013. The results of the relationship among PWER, climate change, and land‐use changes showed that climate change was the dominant control on the PWER change in this watershed. Compared to the period 1986–1995, the average PWER decreased 23.32% and 64.98% as a result of climate change in the periods 1996–2005 and 2006–2013, respectively. In contrast with climate change, the effects of land‐use changes on the average PWER were much lower, and represented a change in PWER of less than 3.3% across the whole watershed. The study method we used could provide some valuable reference for wind erosion modelling, and the research results should help climate and land‐use researchers to develop strategies to reduce wind erosion. Copyright © 2017 John Wiley & Sons, Ltd.     

三维复杂地壳结构非线性走时反演

中国大陆中西部乃至全球造山带普遍具有复杂地壳结构.随着矿产资源勘探和深部探测研究的深入,探测造山带及盆山耦合区下方地壳精细结构正逐渐成为当前面临的巨大挑战.人工源深地震测深方法正越来越清晰地揭示出不同构造域地壳速度结构的基本特征,然而传统的层状结构模型参数化方法难以准确描述复杂地质模型,通常情况下多忽略速度结构的精细间断面且采用层边界平滑处理,难以满足地壳精细结构成像的发展要求.针对上述困难,本文采用最近发展的块状结构建模方案构建三维复杂地壳模型,基于逐段迭代射线追踪正演走时计算方法,推导了走时对三角形界面深度以及网格速度的偏导数,开展了非线性共轭梯度走时反演方法研究.发展了利用直达波和反射波等多震相走时数据对界面深度和网格速度的多参数联合反演方法,并引人不同种类震相数据的权系数和不同类型参数偏导数归一化的方法.数值算例表明,基于块状结构的非线性共轭梯度走时反演方法适用于复杂地壳结构模型,在利用人工源走时数据反演复杂地壳精细结构领域具有良好的应用前景.     

水平层状非均质TI地层中仪器偏心情况下三维感应测井响应高效数值模拟与响应特征分析

本文针对中国石油集团测井有限公司(CPL)三维阵列感应测井仪器(Three Dimensional Induction Tool,TDIT)的真实结构与参数,利用2.5维数值模式匹配技术研究建立水平层状非均质TI地层中仪器偏心情况下三维感应测井响应的高效数值模拟算法.首先,利用2.5维数值模式匹配技术给出水平层状非均质TI模型中偏心磁流源并矢Green函数的半解析解.在此基础上,结合三维阵列感应测井仪器参数以及测量过程中出现的仪器偏心与旋转等实际情况,通过叠加原理推导出该仪器响应的有效计算公式.最后,通过数值模拟结果分析考察仪器偏心、仪器自旋角等参数对测井响应的影响以及变化特征,为多分量感应资料处理与解释提供理论基础.     

大震下村镇建筑砌体结构的抗震性能数值分析

为探讨村镇建筑低层砌体结构在大震下的动力响应及损伤分布情况,基于农居结构性能实地调查与检测,在有限元软件ABAQUS中建立了不同抗震构造措施的砌体结构有限元模型,并进行结构动力特性及大震下弹塑性时程的分析,对比它们的自振特性参数、位移响应参数及损伤破坏形态。分析表明,低层砌体结构合理设置构造柱后结构自振周期略有减小,但振型不变;在弹性变形阶段构造柱能有效约束结构的动力位移响应,进入塑性变形后构造柱可提高砌体结构的耗能能力,但值得注意的是,结构刚度退化后构造柱会加剧纵横向抗侧刚度的不均衡性;低层砌体结构合理设置圈梁构造柱可有效抑制承重横墙的裂缝发展及楼屋盖发生支座失效破坏,且可以明显削弱结构的扭转效应。     

四川2015速度模型在九寨沟M_S7.0地震震源深度测定中的应用

利用四川2015模型,选择Msdp嵌入的几种常用定位方法对九寨沟M_S7.0地震进行重新定位,比较震源深度结果,并用PTD方法验证合适的震源深度,从而得到较为可靠的震源深度。本文最终判定九寨沟M_S7.0地震震源深度为12±2km。