双源CT对冠脉搭桥术后桥血管评价的Meta分析

目的:利用循证医学方法,对双源CT评价冠状动脉搭桥术(CABG)后桥血管狭窄程度的价值进行Meta分析。方法:检索CNKI、万方、维普数据库以及Cochrance Library、PubMed、OVID、Embase等外文数据库,搜索双源CT诊断桥血管狭窄程度的诊断性试验。对纳入资料使用Meta-disc1.4软件进行分析计算,计算合并敏感度、特异度和诊断比值比。结果:最终入选5篇文献,其合并敏感度、特异度和诊断比值比分别为99%、99%、4984,受试者工作特征曲线下面积为99.84%。结论:双源CT对于CABG后桥血管的评价具有很高的诊断效能和临床意义。      

四川九寨沟7.0级地震后社交媒体多层次信息沟通功能分析

本文以“社交媒体多层次信息流”为概念框架,分析了四川九寨沟7.0级地震发生后,个人、当地的组织、宏观层面的主流媒体使用社交媒体所发挥的作用。通过对微博的数据进行挖掘分析,总结出地震灾害发生后社交媒体所具有的5项功能:人际之间的交流,地方政府、本土组织以及当地媒体的传播渠道,大众传媒信息发布的渠道,信息的收集和分享,微观、中观以及宏观各主体间沟通的渠道。在强震发生后社交媒体有巨大的传播潜力,本文的研究成果对未来大震发生后如何利用社交媒体来应对灾害有一定的借鉴意义。     

基于SFTP的GNSS数据采集软件的设计与实现

本文首先对GNSS数据产品服务平台的建设背景及其系统设计框架进行概述,进而介绍了平台的关键组成模块——GNSS数据采集软件。因GNSS数据采集要求安全可靠,调研后引入了SFTP安全文件传输技术,并开展了基于SFTP技术的采集软件方案的设计与实现。该方案保证了数据采集的简便、稳定和安全,为服务平台的整体建设与运行提供了有效保障。     

通过断层气氢探测新郑-太康断裂的浅层位置

新郑-太康断裂隐伏于河南省东部平原下,是一条规模较大的北西向断裂带,曾于2010年发生太康4.7级地震,确定该断裂准确的浅层位置对防震减灾具有重要意义。根据深部石油勘探资料,应用德尔格X-am 7000型多气体检测仪,在新郑地区布置2条与断裂走向近垂直的地球化学测线进行土壤氢气浓度测试,结果发现解放路和马庄村-前宫村测线异常点位处氢气浓度分别为背景值的16-33倍和40-50倍。2条H₂浓度曲线同步解释出一条倾向变化、宽约150m的走滑断裂带,位置与石油勘探资料吻合良好。此次研究表明利用断层气氢探测隐伏断裂的浅层位置在该区具有较好的可行性。     

Shales in the Qiongzhusi and Wufeng–Longmaxi Formations: a rock-physics model and analysis of the effective pore aspect ratio

The shales of the Qiongzhusi Formation and Wufeng–Longmaxi Formations at Sichuan Basin and surrounding areas are presently the most important stratigraphic horizons for shale gas exploration and development in China. However, the regional characteristics of the seismic elastic properties need to be better determined. The ultrasonic velocities of shale samples were measured under dry conditions and the relations between elastic properties and petrology were systemically analyzed. The results suggest that 1) the effective porosity is positively correlated with clay content but negatively correlated with brittle minerals, 2) the dry shale matrix consists of clays, quartz, feldspars, and carbonates, and 3) organic matter and pyrite are in the pore spaces, weakly coupled with the shale matrix. Thus, by assuming that all connected pores are only present in the clay minerals and using the Gassmann substitution method to calculate the elastic effect of organic matter and pyrite in the pores, a relatively simple rock-physics model was constructed by combining the self-consistent approximation (SCA), the differential effective medium (DEM), and Gassmann’s equation. In addition, the effective pore aspect ratio was adopted from the sample averages or estimated from the carbonate content. The proposed model was used to predict the P-wave velocities and generally matched the ultrasonic measurements very well.     

Study on the simulation of acoustic logging measurements in horizontal and deviated wells

The conventional acoustic logging interpretation method, which is based on vertical wells that penetrate isotropic formations, is not suitable for horizontal and deviated wells penetrating anisotropic formations. This unsuitability is because during horizontal and deviated well drilling, cuttings will splash on the well wall or fall into the borehole bottom and form a thin bed of cuttings. In addition, the high velocity layers at different depths and intrinsic anisotropy may affect acoustic logging measurements. In this study, we examine how these factors affect the acoustic wave slowness measured in horizontal and deviated wells that are surrounded by an anisotropic medium using numerical simulation. We use the staggered-grid finite difference method in time domain (FDTD) combined with hybrid-PML. First, we acquire the acoustic slowness using a simulated array logging system, and then, we analyze how various factors affect acoustic slowness measurements and the differences between the effects of these factors. The factors considered are high-velocity layers, thin beds of cuttings, dipping angle, formation thickness, and anisotropy. The simulation results show that these factors affect acoustic wave slowness measurements differently. We observe that when the wavelength is much smaller than the distance between the borehole wall and high velocity layer, the true slowness of the formation could be acquired. When the wavelengths are of the same order (i.e., in the near-field scenarios), the geometrical acoustics theory is no longer applicable. Furthermore, when a thin bed of cuttings exists at the bottom of the borehole, Fermat's principle is still applicable, and true slowness can be acquired. In anisotropic formations, the measured slowness changes with increments in the dipping angle. Finally, for a measurement system with specific spacing, the slowness of a thin target layer can be acquired when the distance covered by the logging tool is sufficiently long. Based on systematical simulations with different dipping angles and anisotropy in homogenous TI media, slowness estimation charts are established to quantitatively determine the slowness at any dipping angle and for any value of the anisotropic ratio. Synthetic examples with different acoustic logging tools and different elastic parameters demonstrate that the acoustic slowness estimation method can be conveniently applied to horizontal and deviated wells in TI formations with high accuracy.     

滇西南地区南汀河断裂带三维深部电性结构及其孕震环境

南汀河断裂带为滇西南地区活动断裂体系中规模最大的一条北东向断裂,其构造活动及地震危险性一直备受关注.本文基于覆盖云南境内南汀河断裂带的大地电磁测深宽频带阵列数据,利用大地电磁三维反演解释技术,首次获得了南汀河断裂带的精细三维深部电性结构.在上地壳深度,南汀河断裂带西南段与中段的电性结构表现出沿构造走向的高导条带特征,北东段表现为高阻结构.该高阻结构可能为临沧—勐海花岗岩体的电性反映,指示南汀河断裂可能未切穿该花岗岩带.在中下地壳深度,南汀河断裂带西南段存在大范围高导层,北东段则表现为整体性的高阻地壳,因此南汀河断裂北东段可能具有发生强震的介质结构背景.南汀河断裂带西南段的耿马地震区深部呈现北东向与北北西向的"X"型高导构造样式,该高导结构以南存在一个显著高阻异常体,1988年耿马M_S7.2地震以及2015年沧源M_S5.5级地震均发生于该高阻体与"X"型高导条带的电性边界.青藏高原东南缘绕东构造结流入滇西地区的中下地壳流可能受到南汀河断裂北东段中下地壳高阻体的阻挡而呈分流式分布于保山地块以及澜沧江断裂以东.     

Potential wind erosion rate response to climate and land‐use changes in the watershed of the Ningxia–Inner Mongolia reach of the Yellow River,China, 1986–2013

Climate and land‐use changes could strongly affect wind erosion and in turn cause a series of environmental problems. Thus, the objective of this study was to assess potential wind erosion rate (PWER) response to climate and land‐use changes in the watershed of the Ningxia–Inner Mongolia Reach of the Yellow River (NIMRYR), China. The watershed of NIMRYR suffers from serious wind erosion hazards, and over recent decades, wind erosion intensity and distribution has changed, following climate and land‐use changes. To understand these processes in the NIMRYR watershed, the Integrated Wind Erosion Modelling System (IWEMS) and the Revised Wind Erosion Equation (RWEQ) were used to calculate the PWER under different climate conditions and land‐use scenarios, and to assess the influences of climate and land‐use changes on the PWER. The results show the PWER in the whole watershed had a significant declining trend from 1986 to 2013. The results of the relationship among PWER, climate change, and land‐use changes showed that climate change was the dominant control on the PWER change in this watershed. Compared to the period 1986–1995, the average PWER decreased 23.32% and 64.98% as a result of climate change in the periods 1996–2005 and 2006–2013, respectively. In contrast with climate change, the effects of land‐use changes on the average PWER were much lower, and represented a change in PWER of less than 3.3% across the whole watershed. The study method we used could provide some valuable reference for wind erosion modelling, and the research results should help climate and land‐use researchers to develop strategies to reduce wind erosion. Copyright © 2017 John Wiley & Sons, Ltd.     

三维复杂地壳结构非线性走时反演

中国大陆中西部乃至全球造山带普遍具有复杂地壳结构.随着矿产资源勘探和深部探测研究的深入,探测造山带及盆山耦合区下方地壳精细结构正逐渐成为当前面临的巨大挑战.人工源深地震测深方法正越来越清晰地揭示出不同构造域地壳速度结构的基本特征,然而传统的层状结构模型参数化方法难以准确描述复杂地质模型,通常情况下多忽略速度结构的精细间断面且采用层边界平滑处理,难以满足地壳精细结构成像的发展要求.针对上述困难,本文采用最近发展的块状结构建模方案构建三维复杂地壳模型,基于逐段迭代射线追踪正演走时计算方法,推导了走时对三角形界面深度以及网格速度的偏导数,开展了非线性共轭梯度走时反演方法研究.发展了利用直达波和反射波等多震相走时数据对界面深度和网格速度的多参数联合反演方法,并引人不同种类震相数据的权系数和不同类型参数偏导数归一化的方法.数值算例表明,基于块状结构的非线性共轭梯度走时反演方法适用于复杂地壳结构模型,在利用人工源走时数据反演复杂地壳精细结构领域具有良好的应用前景.