河南汝阳地区-巨型蜥脚类恐龙股骨化石的发现及其地层学意义

报道了首次在河南省汝阳县发现的大型蜥脚类恐龙股骨化石。从股骨近端的大小来判断，该股骨的实际长度可能超过2m，应属于巨型蜥脚类恐龙的股骨无疑。虽然化石破碎，种属的归属存在一定的困难，但是它的发现无论从晰脚类恐龙的分布、演化还是从地层学上都具有重要意义。该恐龙股骨化石的发现，将该地区原认为属于古近系蟒川组的时代向前推至早白垩世晚期或晚白垩世早期，同时其下伏地层陈宅沟组也应划归白垩纪时期的沉积。     

四川“金土地工程”区农业地质调查评价的方法

简要介绍了四川省地质调查院在"金土地工程"区开展农业地质调查评价试点研究项目的背景、目标任务、方法技术和提交的主要成果。通过试点研究,确定了该项工作的内容以土壤地球化学测量为主,地质、遥感等多种综合调查手段为辅的综合调查,其核心是土地质量的地球化学综合评估。     

氮氧同位素在河流硝酸盐研究中的应用

多年来，世界各地河流普遍存在硝酸盐污染问题。为控制河流的硝酸盐污染，确定河水中硝酸盐的来源以及研究氮的循环过程就显得尤为重要。由于在不同成因下，硝酸盐的δ¹⁵N和δ¹⁸O存在着较大差异，因此利用氮、氧同位素方法研究河流硝酸盐问题正日益受到国内外研究人员的重视。综述了用硝酸盐中氮、氧同位素来研究河流硝酸盐的不同来源(大气沉降、化肥、牲畜粪、土壤硝酸盐等)和示踪其地球化学循环过程，特别是反硝化过程，这两方面的研究进展，并对我国河流硝酸盐研究现状进行了讨论及提出今后的研究方向。      

地震序列较强余震最小二乘拟合预测的方法研究

本研究给出了针对地震序列较强余震发生时间进行快速预测的一种方法,即最小二乘拟合预测方法.该方法包括:最小二乘拟合预测模型的建立、预测模型的各种可信性检验及模型预测等内容.震例研究表明,该方法在大(强)地震现场震情分析中可望发挥积极作用.     

区域地质环境质量综合评价及应用研究

在地质环境质量评价研究中,地质环境分析方法的研究有待于进一步深化,需要探索一些更为具体、可操作性的方法。层次分析法是一种定性与定量相结合的多目标决策分析方法,是快速解决地质环境这种目标结构复杂问题的有效途径。文章以广东省恩平市地质环境质量评价为例,运用层次分析法对影响地质环境的因素进行分析,并利用GIS分析与层次分析法进行耦合,探讨其在地质环境质量评价中的应用。研究中选取坡度、岩土体类型、地质构造、年降雨量、人类活动等作为地质环境质量的评价因素,并提出了这些因素的提取与获得途径。通过计算机进行网络剖分及空间分析叠加,计算每个单元的质量评价指数,生成地质环境评价等值线,得出在整个研究区域内地质环境质量评价图。     

连拱隧道施工对洞口仰坡影响的三维数值分析

以江西某高速公路一浅埋偏压连拱隧道为例,采用Marc有限元程序对其出口段进行了动态施工的三维数值模拟。从施工过程中的应力集中、塑性区的分布形态和发展规律、仰坡轴向地表位移的分布特征等方面,系统研究了偏压连拱隧道施工对强风化岩体洞口仰坡的影响作用机制。结果表明:在模拟施工过程中塑性区和应力集中区只出现在洞体附近,可能的仰坡失稳往往是隧道施工失稳的累进性响应;洞口仰坡的轴向水平位移前缘大、后缘小,垂直位移后缘大、前缘小;隧道上方和近山脊一侧仰坡位移比近山谷一侧大,仰坡失稳往往从隧道上方和埋深较大一侧开始。     

佳木斯隆起带乌拉嘎断裂西缘1∶5万水系沉积物测量方法研究

前人研究成果表明,有机质吸附作用使样品中的元素产生一定的富集,这种影响随着有机质含量增加而越加强烈,将掩盖元素真实含量的起伏,造成假异常。通过对佳木斯隆起带乌拉嘎断裂西缘水系沉积物样品的分配及有机质含量特征、主要成矿元素的表生地球化学分布特征的研究,认为野外截取-10~ 60目粒级段作为采样介质,可完全满足工作需要,获得真实可靠的地球化学异常,取得较好的地质找矿效果。     

北京市地面沉降发展及对城市建设的影响

地面沉降是北京市平原区主要地质灾害之一,最早在1935年发现于西单至东单一带,到目前为止已经形成了多个地面沉降中心,到2005年底,累计沉降量大于50mm的沉降区达4114 km~2,大于100mm的沉降区达2815km~2。地面沉降已经对城市基础设施造成一定程度的破坏,并且已经对奥运场馆、规划新城、CBD等重要区域构成潜在威胁,所以必须及时制定完善的防治措施来降低地面沉降的危害。     

北祁连西段吊达坂地区水系沉积物地球化学特征及找矿预测

以北祁连西段吊达坂水系沉积物测量地球化学特征为研究对象，通过元素含量的概率分布、元素富集与分异、单元素异常、元素相关性分析及异常元素组合等特征的研究，在区内共圈定综合地球化学异常18处，划分出3个铜铅锌多金属找矿远景区，发现矿点4处。研究结果显示水系沉积物测量在北祁连西段半干旱高寒山区找矿效果明显。     

UPPER CRUSTAL VELOCITY STRUCTURE AND CONSTRAINING FAULT INTERPRETATION FROM SHUNYI-TANGGU REFRACTION EXPERIMENT DATA

The urban active fault survey is of great significance to improve the development and utilization of urban underground space, the urban resilience, the regional seismic reference modeling, and the natural hazard prevention. The Beijing-Tianjin metropolitan region with the densest population is one of the most developed and most important urban groups, located at the northeastern North China plain. There are several fault systems crossing and converging in this region, and most of the faults are buried. The tectonic setting of the faults is complex from shallow to deep. There are frequent historical earthquakes in this area, which results in higher earthquake risk and geological hazards. There are two seismicity active belts in this area. One is the NE directed earthquake belt located at the east part of the profile in northern Ninghai near the Tangshan earthquake region. The other is located in the Beijing plain in the northwest of the profile and near the southern end of Yanshan fold belt, where the 1679 M8.0 Sanhe-Pinggu earthquake occurred, the largest historical earthquake of this area. Besides, there are some small earthquake activities related to the Xiadian Fault and the Cangdong Fault at the central part of the profile.
The seismic refraction experiment is an efficient approach for urban active fault survey, especially in large- and medium-size cities. This method was widely applied to the urban hazard assessment of Los Angeles. We applied a regularized tomography method to modeling the upper crustal velocity structure from the high-resolution seismic refraction profile data which is across the Beijing-Tianjin metropolitan region. This seismic refraction profile, with 185km in length, 18 chemical explosive shots and 500m observation space, is the profile with densest seismic acquisition in the Beijing-Tianjin metropolitan region up to now. We used the trial-error method to optimize the starting velocity model for the first-arrival traveltime inversion. The multiple scale checker board tests were applied to the tomographic result assessment, which is a non-linear method to quantitatively estimate the inversion results. The resolution of the tomographic model is 2km to 4km through the ray-path coverage when the threshold value is 0.5 and is 4km to 7km through the ray-path coverage when the threshold value is 0.7. The tomographic model reveals a very thick sediment cover on the crystalline basement beneath the Beijing-Tianjin metropolitan region. The P wave velocity of near surface is 1.6km/s. The thickest sediment cover area locates in the Huanghua sag and the Wuqing sag with a thickness of 8km, and the thinnest area is located at the Beijing sag with a thickness of 2km. The thickness of the sediment cover is 4km and 5km in the Cangxian uplift and the Dacang sag, respectively. The depth of crystalline basement and the tectonic features of the geological subunits are related to the extension and rift movement since the Cenozoic, which is the dynamics of formation of the giant basins.
It is difficult to identify a buried fault system, for a tomographic regularization process includes velocity smoothing, and limited by the seismic reflection imaging method, it is more difficult to image the steep fault. Velocity and seismic phase variations usually provide important references that describe the geometry of the faults where there are velocity differences between the two sides of fault. In this paper, we analyzed the structural features of the faults with big velocity difference between the two sides of the fault system using the velocity difference revealed by tomography and the lateral seismic variations in seismograms, and constrained the geometry of the major faults in the study region from near surface to upper crust. Both the Baodi Fault and the Xiadian Fault are very steep with clear velocity difference between their two sides. The seismic refraction phases and the tomographic model indicate that they both cut the crystalline basement and extend to 12km deep. The Baodi Fault is the boundary between the Dachang sag and the Wuqing sag. The Xiadian Fault is a listric fault and a boundary between the Tongxian uplift and the Dachang sag. The tomographic model and the earthquake locations show that the near-vertical Shunyi-Liangxiang Fault, with a certain amount of velocity difference between its two sides, cuts the crystalline basement, and the seismicity on the fault is frequent since Cenozoic. The Shunyi-Liangxiang Fault can be identified deep to 20km according to the seismicity hypocenters.
The dense acquisition seismic refraction is a good approach to construct velocity model of the upper crust and helpful to identify the buried faults where there are velocity differences between their two sides. Our results show that the seismic refraction survey is a useful implement which provides comprehensive references for imaging the fault geometry in urban active fault survey.