Ageostrophic dynamics of the upper ocean layer: Measurements over the transatlantic section along 53° N

Some aspects of the upper ocean layer dynamics are considered, including the Ekman transport, the relation of the thickness of the quasi-homogeneous layer to the thickness of the layer of rotation of the drift current vector, and the correlation between the level of the turbulent energy dissipation and the thickness of the quasi-homogeneous layer.     

Sediment-starved sand ridges on a mixed carbonate/siliciclastic inner shelf off west-central Florida

High-resolution side-scan mosaics, sediment analyses, and physical process data have revealed that the mixed carbonate/siliciclastic, inner shelf of west-central Florida supports a highly complex field of active sand ridges mantled by a hierarchy of bedforms. The sand ridges, mostly oriented obliquely to the shoreline trend, extend from 2 km to over 25 km offshore. They show many similarities to their well-known counterparts situated along the US Atlantic margin in that both increase in relief with increasing water depth, both are oriented obliquely to the coast, and both respond to modern shelf dynamics. There are significant differences in that the sand ridges on the west-central Florida shelf are smaller in all dimensions, have a relatively high carbonate content, and are separated by exposed rock surfaces. They are also shoreface-detached and are sediment-starved, thus stunting their development. Morphological details are highly distinctive and apparent in side-scan imagery due to the high acoustic contrast. The seafloor is active and not a relict system as indicated by: (1) relatively young AMS ¹⁴C dates (<1600 yr BP) from forams in the shallow subsurface (1.6 meters below seafloor), (2) apparent shifts in sharply distinctive grayscale boundaries seen in time-series side-scan mosaics, (3) maintenance of these sharp acoustic boundaries and development of small bedforms in an area of constant and extensive bioturbation, (4) sediment textural asymmetry indicative of selective transport across bedform topography, (5) morphological asymmetry of sand ridges and 2D dunes, and (6) current-meter data indicating that the critical threshold velocity for sediment transport is frequently exceeded. Although larger sand ridges are found along other portions of the west-central Florida inner shelf, these smaller sand ridges are best developed seaward of a major coastal headland, suggesting some genetic relationship. The headland may focus and accelerate the N–S reversing currents. An elevated rock terrace extending from the headland supports these ridges in a shallower water environment than the surrounding shelf, allowing them to be more easily influenced by currents and surface gravity waves. Tidal currents, storm-generated flows, and seasonally developed flows are shore-parallel and oriented obliquely to the NW–SE trending ridges, indicating that they have developed as described by the Huthnance model. Although inner shelf sand ridges have been extensively examined elsewhere, this study is the first to describe them in a low-energy, sediment-starved, dominantly mixed siliciclastic/carbonate sedimentary environment situated on a former limestone platform.     

The influence of salinity on the solubility of Zn and Cd sulphides in the Scheldt estuary

In the estuary of the river Scheldt, where an oxygen gradient exists in addition to the salinity gradient, redox processes will be of major importance for trace metal mobilisation. In this study, the influence of salinity and pH on the redox processes of dissolved Zn and Cd sulphides is investigated together with the effects on the ratio of the dissolved Zn and Cd concentrations. The speciation of these metals is calculated with the chemical equilibrium programme +. Zn sulphides are oxidised at lower oxygen concentrations than Cd sulphides, due to lower stability constants, causing a sudden increase or peak in the dissolved Zn/Cd ratio. The formation of dissolved Cd chloride complexes when oxidation occurs at high salinities (S=15) increases the mobility of Cd, causing a decrease in the Zn/Cd peak of the total dissolved concentrations. The peak is three to four times smaller at S=15 than when oxidation occurs at S=2. The simple model calculations compare very well with field data. The Scheldt estuary is suitable to illustrate these calculations. In the 1970s, the anoxic part of the estuary reached S=15–20, but since the early 1980s it has dropped to S=2–10. Historic data on metals in the estuary from 1978, 1987 and the 1990s were used to compare with the equilibrium calculations. The increase of the dissolved Zn/Cd peak at low salinity as a consequence, of the decreasing anoxic region is confirmed well by the data. The good agreement between model calculations and field data is a proof of the extreme importance of redox processes for the solubility of Zn and Cd sulphides in the estuary.     

Sublethal effects of oiled sediment on the sand worm, Nereis (neanthes) virens: Induced changes in burrowing and emergence

The burrowing and emergence behavior of sand worms, Nereis (Neanthes) virens Sars, in sediment contaminated with sublethal concentrations of Prudhoe Bay crude oil ranging from 74 to 5222 ppm, was studied in the laboratory. Initial burrowing in oiled sediment did not differ from that observed in unoiled sediment. Emergence of exposed worms was related to the oil concentration and the extent of weathering of oiled sediment. Sand worms buried in unoiled sediment did not emerge. Worms dug from oiled sediment after 12 hours' exposure and placed on unoiled sediment were impaired, resulting in a significant increase in time to burrow. However, after 12h, they recovered and burrowed at normal rates. Worms held in oiled sediment for 96 h also recovered. Possible causes for recovery are discussed. Results suggest that oil-induced aberrations may increase vulnerability to predation.     

The distribution of total and electrochemically available copper in the northwestern atlantic ocean

Copper in a series of samples from the northwestern Atlantic has been determined by anodic stripping voltammetry (ASV) and atomic absorption spectrometry after preconcentration by cobalt—APDC coprecipitation. Samples from a transect across the continental shelf directly off the New York Bight showed a linear relationship between total copper and salinity (31–34‰) and less than 5% of the total copper was detectable by ASV. A slope water station showed less than 9% of the total copper to be ASV detectable in the upper 780m, below which the ASV detectable copper increased to 70% at 3000 m. The Sargasso Sea profiles showed less than 7% ASV detectable copper in the upper 150 m; the fraction of the total copper detected by ASV increased to about 80% of the total copper at greater depths. The reduced availability of copper to the ASV measurement in coastal waters and open ocean surface waters appears to be related to recent contact with waters where biological productivity occurs.     

Characteristics of Salter's cam for extracting energy from ocean waves

The performance of Salter's cam as an energy extractor from ocean waves is studied numerically on the basis of linear theory of surface waves and floating bodies. Quantities of engineering interest such as efficiency, induced motion and reaction forces are presented and discussed both for fixed and for partly constrained cam shafts.     

A modified linear analysis of a wave-energy conversion buoy

The analysis of a pneumatic-type wave-energy conversion buoy is developed assuming independence of the buoy heaving motion and the motion of the water column within the center pipe. Results of the analysis are then compared with experimental data in a study of the relative air velocity within the turbine passage. The results compare very well. The effect of the variation of the center pipe length is found to be significant for periods about the surge chamber resonance but is negligible in the neighborhood of the heaving resonance period. Further, the theory is applied to a prototype buoy study of the U.S. Coast Guard, and a dimensionless design curve is developed from the results of the prototype analysis.