Development of a methodology for assessing the environmental impact of radioactivity in Northern Marine environments

The requirement to assess the impacts of radioactivity in the environment explicitly and transparently is now generally accepted by the scientific community. A recently developed methodology for achieving this end for marine ecosystems is presented within this paper. With its clear relationship to an overarching system, the marine impact assessment is built around components of environmental transfer, ecodosimetry and radiobiological effects appraisal relying on the use of "reference organisms". Concentration factors (CFs), dynamic models and, in cases where parameters are missing, allometry have been employed in the consideration of radionuclide transfer. Dose conversion coefficients (DCCs) have been derived for selected flora and fauna using, inter alia, dose attenuation and chord distribution functions. The calculated dose-rates can be contextualised through comparison with dose-rates arising from natural background and chronic dose-rates at which biological effects have been observed in selected "umbrella" endpoints.     

Field accumulative behavior of organochlorine pesticides. The role of crabs and sediment characteristics in coastal environments

The influence of intertidal crab beds on the concentrations of organochlorine (OC) pesticides in sediment was studied in two different coastal environments in Argentina. Samples of male burrowing crabs (Chasmagnathus granulatus) were collected for this study. Our field data showed lower bioaccumulation of OC pesticides in crabs from sediments with a higher total organic carbon (TOC) and higher clay content. Thus, concentrations in crabs depend on the physico-chemical characteristics of the sediment where they live more than on the OC pesticide concentrations in the environment. The distribution patterns in sediment from inside and outside crab burrows were similar for both coastal areas being HCHs  γ-chlordane > p,p′-DDE for San Antonio Bay (SAO), and HCHs > p,p′-DDE  γ-chlordane for Mar Chiquita (MCh) coastal lagoon. OC pesticide concentrations in sediment were significantly lower inside than outside crab burrows, irrespective of the sediment physico-chemical characteristics due to the bioturbation activity of C. granulatus.     

Reactive sulfides relationship with metals in sediments from an eutrophicated estuary in Southeast Brazil

The potential association of acid-volatile sulfides (AVS) and reactive (HCl soluble) Fe with the distribution of reactive trace metals (Cu, Cd, Ni, Pb and Zn) was investigated in sediment cores collected in the Igua?u river estuarine system (Guanabara bay, Brazil), within the river (core R) and the bay (core B) areas. Moderate to extremely high AVS concentrations (33-314 micromol g(-1)) were found in the rapidly-accumulated sediments of this eutrophicated estuary. AVS showed significant correlations with Fe, Ni and Pb in core B, whereas no correlation between AVS and metals was observed in core R. Results suggest that the AVS:Fe molar ratio may often reflect the diagenetic conditions controlling the distribution of Cd and Cu in core B better than AVS and Fe levels themselves. A shift in the biogeochemical controls of metal distribution from the river to the open bay sediments is suggested, with a greater association of most metals with AVS and Fe in bay sediments.     

Biodegradation of petroleum hydrocarbons at low temperature in the presence of the dispersant Corexit 9500

Our study examined the effects of Corexit 9500 and sediment on microbial mineralization of specific aliphatic and aromatic hydrocarbons found in crude oil. We also measured gross mineralization of crude oil, dispersed crude oil and dispersant by a marine microbial consortium in the absence of sediment. When provided as carbon sources, our consortium mineralized Corexit 9500 the most rapidly, followed by fresh oil, and finally weathered oil or dispersed oil. However, mineralization in short term assays favored particular components of crude oil (2-methyl-naphthalene > dodecane > phenanthrene > hexadecane > pyrene) and was not affected by addition of nutrients or sediment (high sand, low organic carbon). Adding dispersant inhibited hexadecane and phenanthrene mineralization but did not affect dodecane and 2-methyl-naphthalene mineralization. Thus, the effect of dispersant on biodegradation of a specific hydrocarbon was not predictable by class. The results were consistent for both high and low oiling experiments and for both fresh and weathered oil. Overall, our results indicate that environmental use of Corexit 9500 could result in either increases or decreases in the toxicity of residual oil through selective microbial mineralization of hydrocarbons.     

Effects of chitin on microbial emulsification, mineralization potential, and toxicity of bunker C fuel oil

Bunker C, one of the most frequently spilled petroleum products in the US, is difficult to remove from oiled surfaces and is relatively recalcitrant to biodegradation; therefore, emulsification and biodegradability must be optimized before bioremediation can be considered a viable treatment option. Sand from a freshly oiled beach near Dutch Harbor, Alaska, was incubated at 10 degrees C with nutrients (Bushnell-Haas (BH)) or nutrients with crab shell chitin (BH-C). BH-C amendment resulted in greater numbers of bunker C emulsifiers and greater mineralization potentials for hexadecane, phenanthrene, and fluorene than with BH only. Compared to BH alone, mineralization potentials for bunker C also were higher in BH-C, with an estimated 8% of fuel oil mineralized after 6 weeks. Microbially emulsified oil was more toxic than in uninoculated controls (p < 0.05) as measured by Microtox assays. However, toxicity was significantly lower in BH-C than BH after 4 and 6 weeks incubation (p < 0.05).     

Measurement of a Peak in the Cosmic Microwave Background Power Spectrum from the North American Test Flight of Boomerang

We describe a measurement of the angular power spectrum of anisotropies in the cosmic microwave background (CMB) at scales of 0&fdg;3 to 5 degrees from the North American test flight of the Boomerang experiment. Boomerang is a balloon-borne telescope with a bolometric receiver designed to map CMB anisotropies on a long-duration balloon flight. During a 6 hr test flight of a prototype system in 1997, we mapped more than 200 deg(2) at high Galactic latitudes in two bands centered at 90 and 150 GHz with a resolution of 26&arcmin; and 16&farcm;5 FWHM, respectively. Analysis of the maps gives a power spectrum with a peak at angular scales of 1 degrees with an amplitude 70 μK(CMB).     

Small-scale Gradients and Large-scale Diffusion of Charged Particles in the Heliospheric Magnetic Field

We present a simple spin-evolution model that predicts that rapidly rotating accreting neutron stars will be confined mainly to a narrow range of spin frequencies: P=1.5-5 ms. This is in agreement with current observations of neutron stars in both the low-mass X-ray binaries and the millisecond radio pulsars. The main ingredients in the model are (1) the instability of r-modes above a critical spin rate, (2) the thermal runaway that is due to the heat released as viscous damping mechanisms counteract the r-mode growth, and (3) a revised estimate of the strength of the dissipation that is due to the presence of a viscous boundary layer at the base of the crust in an old and relatively cold neutron star. We discuss the gravitational waves that are radiated during the brief r-mode-driven spin-down phase. We also briefly touch on how the new estimates affect the predicted initial spin periods of hot young neutron stars.     

Remediation of NAPL source zones: lessons learned from field studies at Hill and Dover AFB

Innovative remediation studies were conducted between 1994 and 2004 at sites contaminated by nonaqueous phase liquids (NAPLs) at Hill and Dover AFB, and included technologies that mobilize, solubilize, and volatilize NAPL: air sparging (AS), surfactant flushing, cosolvent flooding, and flushing with a complexing-sugar solution. The experiments proved that aggressive remedial efforts tailored to the contaminant can remove more than 90% of the NAPL-phase contaminant mass. Site-characterization methods were tested as part of these field efforts, including partitioning tracer tests, biotracer tests, and mass-flux measurements. A significant reduction in the groundwater contaminant mass flux was achieved despite incomplete removal of the source. The effectiveness of soil, groundwater, and tracer based characterization methods may be site and technology specific. Employing multiple methods can improve characterization. The studies elucidated the importance of small-scale heterogeneities on remediation effectiveness, and fomented research on enhanced-delivery methods. Most contaminant removal occurs in hydraulically accessible zones, and complete removal is limited by contaminant mass stored in inaccessible zones. These studies illustrated the importance of understanding the fluid dynamics and interfacial behavior of injected fluids on remediation design and implementation. The importance of understanding the dynamics of NAPL-mixture dissolution and removal was highlighted. The results from these studies helped researchers better understand what processes and scales are most important to include in mathematical models used for design and data analysis. Finally, the work at these sites emphasized the importance and feasibility of recycling and reusing chemical agents, and enabled the implementation and success of follow-on full-scale efforts.