Marginal mafic intrusions as indicators of downslope draining of dense residual melts in anorthositic diapirs?

Geochemical and isotopic investigation of three small mafic intrusions (Løyning: 1250 × 150 m, Hogstad: 2000 × 200 m, Koldal: 1250 × 500 m) in the marginal zones of the Egersund-Ogna (Løyning, Koldal) and Åna-Sira massif-type anorthosites (Hogstad) (Rogaland Anorthositic Province, south Norway: 930 Ma) provides new insights into the late evolution of anorthositic diapirs. These layered mafic intrusions are essentially of norite, gabbronorite as well as leuconorite and display conspicuous evidence of subsolidus recrystallization. In Løyning and Hogstad, the modal layering is parallel to the subvertical foliation in the enclosing anorthosite. The northern part of the Koldal intrusion cuts across the foliation of the anorthosite, whereas in its southern part the subvertical layering is parallel to the anorthosite's foliation. The regularity of the layered structures suggests that the layering was initially acquired horizontally and later tilted during the final movements of the diapirs.

The least differentiated compositions of plagioclase and orthopyroxene in the three intrusions (An₅₉–En₆₈ in Løyning, An₄₉–En₆₄ in Hogstad and An₄₄–En₆₁ in Koldal) and the REE contents in apatite (Hogstad) indicate that their parent magmas were progressively more differentiated in the sequence Løyning–Hogstad–Koldal. Isotopic data (Løyning: ⁸⁷Sr/⁸⁶Sr: 0.70376–0.70457, ε_Ndt: + 6.8 to + 2.7; Hogstad: ⁸⁷Sr/⁸⁶Sr: 0.70537–0.70588, ε_Ndt: + 2.1 to − 0.5; Koldal: ⁸⁷Sr/⁸⁶Sr: 0.70659–0.70911, ε_Ndt: + 3.5 to − 1.6) also indicate that in this sequence, parent magmas were characterized by a progressively more enriched Sr and Nd isotopic signature. In Løyning, the parent magma was slightly more magnesian and anorthitic than a primitive jotunite; in Hogstad, it is a primitive jotunite; and, in Koldal, an evolved jotunite. Given that plagioclase and orthopyroxene of the three intrusions display more differentiated compositions than the orthopyroxene and plagioclase megacryts of the enclosing anorthosites, it is suggested that the parent magmas of the small intrusions are residual melts after anorthosite formation which were entrained in the anorthositic diapir during its rise from lower crustal chambers.

Calculated densities of primitive jotunites (2.73–2.74 at FMQ, 0.15% H₂O, 200 ppm CO₂, 435 ppm F, 1150 °C, 3 kb) and evolved jotunites (2.75–2.76 at FMQ, 0.30% H₂O, 400 ppm CO₂, 870 ppm F, 1135 °C, 3 kb) demonstrate that they are much denser than the plagioclase of the surrounding anorthositic crystal mush (2.61–2.65). Efficient migration and draining of dense residual melts through the anorthositic crystal mush could have taken place along sloping floors (zones of lesser permeability in the mush), which occur along the margins of the rising anorthositic diapirs. This process takes into account the restricted occurrence of the mafic intrusions in the margins of the massif anorthosites. In a later stage, when the anorthosite was nearly consolidated, the residual melts were more differentiated (evolved jotunites) and could have been extracted into extensional fractures in the cooling and contracting anorthositic body in a similar way as aplitic dikes are emplaced in granitic plutons. As in the Rogaland Anorthositic Province, these dikes are much more abundant than the small mafic intrusions, collection and transport along dikes was probably more efficient than draining through the crystal mush.     

Linking a linear pockmark train with a buried Palaeozoic structure: a case study from the St. Lawrence Estuary

The 15-km-long Matane pockmark train belongs to a series of NNE-striking alignments of pockmarks mapped on the seafloor of the St. Lawrence Estuary. It includes 109 pockmarks that show a complete transition from well-defined, relatively deep (up to 8.6 m), crater-like depressions to subtle, partly buried morphological features, suggesting that pockmarks have formed at different periods along the whole alignment and that the location of fluid release has changed through time. On seismic profiles, pockmarks are characterized by vertical seismic chimneys that root in the (fractured?) hinge zone of an open anticline within the autochthonous Palaeozoic rocks of the St. Lawrence Platform. In absence of a geochemical characterization of expelled gas, the relationship between the Matane pockmark train and the anticline in a domain characterized by mature source rocks is the strongest evidence for the genetic link between pockmarks and the release of gas from an active hydrocarbon system or a reservoir located in the Palaeozoic succession.

Response to the Discussion by B. Robins and F. Chiodoni of “Geochemistry of cumulates from the Bjerkreim–Sokndal Intrusion (S. Norway). Part I: Constraints from major elements on the mechanism of cumulate formation and on the jotunite liquid line of descent”

Merging our data with those of Robins and Chiodoni [Robins, B., Chiodoni, F., 2007. Poles apart: A discussion of the « Geochemistry of cumulates from the Bjerkreim–Sokndal layered intrusion (S. Norway). Part I: Constraints from major elements on the mechanism of cumulate formation and on the jotunite liquid line of descent ». Lithos doi:10.1016/j.lithos.2007.03.007], we examine the major-element compositions of 135 samples of so-called phi-C cumulates of the Bjerkreim–Sokndal layered intrusion. We show the limits of the TiO₂/MgO ratio vs. Al₂O₃ diagram in order to ascertain the proportions of cumulus minerals (ilmenite and orthopyroxene) in the ilmenite leuconorite mafic pole. We also discard anomalous samples as we did in the previous paper. The rest of the samples (124 phi-C, i.e. 92% of the whole population) are then used to confirm the existence of plagioclase and mafic poles. It is shown that the mafic pole is indeed a mixture of ilmenite and orthopyroxene, not induced by “spurious correlation”.     

A rapid method for converting medical Computed Tomography scanner topogram attenuation scale to Hounsfield Unit scale and to obtain relative density values

Medical Computed Tomography scanners permit to rapidly obtain qualitative and quantitative information on objects in a non-destructive manner in both longitudinal and transversal directions. CT-scan scales used to express attenuation on the images are different for longitudinal (topograms) and transversal (tomograms) views, restraining the complementary use of the information extracted from both views. Moreover, topograms are of full use in core analysis as they reveal fine-scale information on stratigraphical, sedimentological and physical properties of the material. This paper presents a method to convert CT-scan topogram intensity scale to Hounsfield Unit (HU; scale used on tomograms) and to later extract a relative density from it. The method is based on relationships between topogram and tomogram values, absolute density and effective atomic numbers obtained on a series of minerals. Results show excellent correlations between converted topogram values and HU values obtained on the tomograms, as well as between relative densities derived from the converted topogram values, and the absolute density of the minerals.     

Comparative genetic structure in two high-dispersal prawn species from the south-west Indian Ocean

The penaeid prawns Fenneropenaeus indicus and Metapenaeus monoceros support shallow-water prawn fisheries in the south-west Indian Ocean. They are sympatric and have similar life histories, including developmental stages that depend on estuarine and marine habitats and a short dispersal duration. Nevertheless, M. monoceros juveniles display a more generalist habitat preference in estuaries and recruit to offshore habitats during a different season than F. indicus. We hypothesised that these differences would affect dispersal patterns, leading to dissimilar geographic genetic structure between the two taxa. Given their short dispersal phase, we also hypothesised that the Mozambique Channel would form a barrier to dispersal between the southeastern African mainland and Madagascar sites. Population differentiation was assessed based on analysis of mitochondrial DNA control-region sequences. Both species displayed high haplotype and low nucleotide diversity. Pairwise ?_ST statistics supported the existence of admixed populations along the African mainland sites for both species, with geographic distance isolating populations at the extremes of the sampled range (Kenya and east coast of South Africa). The Madagascar population differed significantly from African mainland populations. The concordant patterns in population differentiation suggest that F. indicus and M. monoceros can be considered as single African stocks, or fisheries management units.     

Role of the bedrock topography in the Quaternary filling of a giant estuarine basin: the Lower St. Lawrence Estuary,Eastern Canada

The geometry of estuarine and/or incised‐valley basins and their protected character compared with open sea basins are favourable for the preservation of sedimentary successions. The Lower St. Lawrence Estuary Basin (LSLEB, eastern Canada) is characterized by a thick (>400 m in certain areas) Quaternary succession. High‐ and very high‐resolution seismic reflection data, multibeam bathymetry coverage completed by core and chronostratigraphic data as well as a 3‐D seismic stratigraphic model are used to document the geometrical relationships between the bedrock and the Quaternary units of the LSLEB. The bedrock geometry of LSLEB is characterized by two large troughs that are interpreted as resulting mainly from repeated (?) periods of glacial overdeepening of a pre‐Quaternary drainage system. However, other mechanisms with complex feedback effects such as differential glacio‐isostatic uplift, erosion, sedimentary supply, and subsidence may have contributed to the formation of bedrock troughs. The two large bedrock troughs are mostly filled by ～200 m thick Wisconsinan (Marine Isotopic Stages 2–4) and possibly older sediments. Overlying units recorded the retreat of the Laurentian Ice Sheet during the Late Wisconsinan (Marine Isotopic Stage 2) and estuarine conditions during the Holocene. The strong correlation existing between the bedrock topography and the thickness of the Quaternary succession is indicative of the effectiveness of the LSLEB as a sediment trap.     

Fe-Ti deposits in Rogaland anorthosites (South Norway): geochemical characteristics and problems of interpretation

The Rogaland anorthosite province (S. Norway) contains numerous Fe-Ti oxide deposits, including the second most important ilmenite deposit in the world, the Tellnes deposit. The largest deposits are located in the Åna-Sira anorthosite massif. Others occur in the Håland-Helleren anorthosite massif, particularly along the deformed contact with the Egersund-Ogna massif, where they were previously considered formed by metasomatic processes. All deposits are now regarded as magmatic. The structure, mineralogy and geochemistry of 11 selected Fe-Ti deposits (Tellnes, Storgangen, Blåfjell, Laksedal, Kydlandsvatn, Kagnuden, Rødemyr, Hestnes, Eigerøy, Svånes, and Jerneld) are discussed in light of recent models proposed for the origin of Rogaland anorthosites and related rocks. Massif-type anorthosites result from the diapiric uprise of a plagioclase crystal mush which crystallized along a large P–T interval. Except for Tellnes, which is related to a post-deformation dyke, the Fe-Ti deposits in anorthosite massifs have been deformed by this movement during and after their crystallization. The differentiation process of the jotunitic parental magma has built up cumulates in the Bjerkreim-Sokndal layered intrusion and liquids in the Tellnes dyke and other jotunitic intrusions. Ilmenite is a liquidus mineral immediately after plagioclase in the sequence of crystallization of these jotunites, its interstitial character in the rocks resulting from subsolidus recrystallization. Ilmenite can thus accumulate early in the evolution of jotunitic magmas. This feature, together with high contents in Cr, V, Mg and Ni, links the Jerneld, Blåfjell and Svånes deposits (type?1) to the early evolution of a jotunitic magma. In the Bjerkreim-Sokndal intrusion, magnetite can appear with ilmenite at the very beginning of the sequence of crystallization, but normally crystallizes after orthopyroxene and before clinopyroxene and apatite. The early appearance of magnetite is a characteristic feature of type 2 deposits (Tellnes, Storgangen, Kydlandsvatn, Rødemyr I) and suggests conditions similar to the early magnetite cumulates in the Bjerkreim-Sokndal intrusion. Evidence of layering further favours gravity-controlled sorting processes to concentrate the oxides. Large-scale subsolidus segregation of the oxides due to high-temperature deformation can further concentrate these minerals in silicate-absent meter-sized masses. Type 3 deposits (Rødemyr II, Kagnuden, Hestnes and Eigerøy) could be derived from the more evolved stages of differentiation, as indicated by high REE in apatite, high Ti and Zn in magnetite and relatively low Cr, V, Mg, Ni contents in both oxides. The Cr content in both oxide minerals is however higher than in the equivalent cumulates of the Bjerkreim-Sokndal intrusion. Although immiscibility as the mechanism of enrichment leading to silicate-absent oxide-apatite veins, as in Hestnes and Eigerøy, cannot be precluded, there is no direct evidence in the veins, nor has any structural or geochemical evidence of immiscibility ever been found in jotunite dykes and Fe-Ti-P-rich rocks. Further investigations on the influence of subsolidus exchange of elements between the two oxides are needed to improve the use of trace elements as differentiation indexes.     

青海锡铁山铅锌矿床硫同位素地球化学研究——深源与海水硫的混合

锡铁山铅锌矿床发育较为完整的喷流沉积系统,包括管道相、近喷口相、远端沉积相及各种喷流沉积岩,并有后期改造作用形成的脉状铅锌矿体。本文通过喷流沉积系统各部位硫化物硫同位素的分析,不同部位硫化物硫同位素组成不同,且规律性变化。以黄铁矿分析结果为例,网脉状石英钠长岩δ34S=+0.8‰,代表供给系统的硫化物脉2.95‰,非层状矿体4.48‰,层状矿体3.25‰,炭质片岩为+6.26‰,后期改造型铅锌矿脉为+2.93‰。代表管道相的网脉状石英钠长岩黄铁矿具有深源(幔源)的硫同位素组成,而矿体或大理岩上盘炭质片岩具有海水硫来源的特点。矿体的硫介于二者之间,更靠近炭质片岩的硫化物同位素组成,其来源可能更多受海水硫酸盐的制约,即锡铁山矿床硫具有混合来源性质,主要是海水硫酸盐的还原,部分来源于深部卤水的供给。硫的还原方式以生物细菌还原为主。层状矿体中硫同位素组成由早至晚δ34S逐渐降低,表明层状矿体成矿作用过程中,发生了生物成因的H2S的大量加入。     

Strategies for waveform processing in sparker data

A sparker is a marine seismic impulsive source used for high-resolution seismic surveys. Sparker sources were very popular during the late 1960s and 1970s before being supplanted by small volume airguns. However, in the last 10 years there has been renewed interest in sparker technology because (1) it can be easily deployed at relatively low costs and (2) in certain areas the use of small airguns is restricted for environmental purposes. In this study a sparker source was used to assess the seismic stratigraphy of Quaternary deposits and to image the sediment/bedrock interface. Three different inverse filtering methods were tested (i.e., spiking deconvolution, match-filtering and vertical seismic profile (VSP) deconvolution) to correct the poor shot-to-shot repeatability of the source and to compress its reverberations. Results show that the matched-filter and VSP deconvolution methods, which design and apply one operator for each shot, produced comparable results, whereas the spiking deconvolution that used the same operator on all traces failed to compress the source signature properly.