Observations of rapid mean flow produced in mercury by a moving heater

Abstract

Experimental and theoretical results are described for the moving flame experiment, where a heat source moves under a horizontal, annular channel filled with liquid mercury. The physical range under discussion consists of the creep flow limit, in which inertial forces are less than viscous forces. A mean surface flow was observed on the mercury. This flow was up to four times greater than the heater speed, and in an opposite direction. The ratio of mean flow to heater speed was theoretically and experimentally found to be proportional to the square of the thermal amplitude, in agreement with a special limit of Davey's earlier results. The basic flow here, as contrasted to those flows analyzed by earlier theories, appears to be generated by surface tension. However, the Reynolds stress mechanism which generates the mean flow is the same. Some experimental flows were so rapid that the range of validity of the present, as well as some earlier theories, was exceeded. The present theory suggests that the higher order nonlinearities may have cancellative effects, which implies that the present and some earlier theories are valid beyond their normal range of validity.     

Meteor44 Video Meteor Photometry

Meteor44 is a software system developed at MSFC for the calibration and analysis of video meteor data. The photometric range of the (8 bit) video data is extended from a visual magnitude range of from 8 to 3 to from 8 to −8 for both meteors and stellar images using saturation compensation. Camera and lens specific saturation compensation coefficients are derived from artificial variable star laboratory measurements. Saturation compensation significantly increases the number of meteors with measured intensity and improves the estimation of meteoroid mass distribution. Astrometry is automated to determine each image's plate coefficient using appropriate star catalogs. The images are simultaneously intensity calibrated from the contained stars to determine the photon sensitivity and the saturation level referenced above the atmosphere. The camera's spectral response is used to compensate for stellar color index and typical meteor spectra in order to report meteor light curves in traditional visual magnitude units. Recent efforts include improved camera calibration procedures and long focal length "streak" meteor photometry. Meteor44 has been used to analyze data from the 2001, 2002 and 2003 MSFC Leonid observational campaigns as well as several lesser showers.     

Tropospheric Ozone in a Global-Scale Three-Dimensional Lagrangian Model and Its Response to NOX Emission Controls

A three-dimensional Lagrangian tropospheric chemistry modelis used toinvestigate the impact of human activities on the tropospheric distributionofozone and hydroxyl radicals. The model describes the behaviour of 50 speciesincluding methane, carbon monoxide, oxides of nitrogen, sulphur dioxide andnineorganic compounds emitted from human activities and a range of other sources.Thechemical mechanism involves about 100 chemical reactions of which 16 arephotochemical reactions whose diurnal dependence is treated in full. The modelutilises a five minute chemistry time step and a three hour advection timestepfor the 50,000 air parcels. Meteorological data for the winds, temperatures,clouds and so on are taken from the UK Meteorological Office global model for1994 onwards. The impacts of a 50% reduction in European NO_Xemissions onglobal ozone concentrations are assessed. Surface ozoneconcentrations decrease in summertime and rise in wintertime, but to differentextents.     

Multi-decadal synthesis of benthic–pelagic coupling in the western arctic: Role of cross-shelf advective processes

Using geographic information systems (GIS) software and geostatistical techniques, we utilized three decades of water-column chlorophyll a data to examine the relative importance of autochthonous versus allochthonous sources of reduced carbon to benthic communities that occur from the northern Bering to the eastern Beaufort Sea shelf. Spatial trend analyses revealed areas of high benthic biomass (>300 g m⁻²) and chlorophyll (>150 mg m⁻²) on both the southern and northern Chukchi shelf; both areas are known as depositional centers for reduced organic matter that originates on the Bering Sea shelf and is advected northward in Anadyr and Bering shelf water masses. We found a significant correlation between biomass and chlorophyll a in the Chukchi Sea, reflective of the strong benthic–pelagic coupling in a system that is utilized heavily by benthic-feeding marine mammals. In contrast, there was no significant correlation between biomass and chlorophyll in the Beaufort Sea, which by comparison, is considerably less productive (biomass and chlorophyll, <75 g m⁻² and <50 mg m⁻², respectively). One notable exception is an area of relatively high biomass (50–100 g m⁻²) and chlorophyll (80 mg m⁻²) near Barter Island in the eastern Beaufort Sea. Compared to other adjacent areas in the Beaufort Sea, the chlorophyll values in the vicinity of Barter Island were considerably higher and likely reflect a long-hypothesized upwelling in that area and close coupling between the benthos and autochthonous production. In the Bering Sea, a drop in benthic biomass in 1994 compared with previous measurements (1974–1993) may support earlier observations that document a decline in biomass that began between the 1980s and 1990s in the Chirikov Basin and south of St. Lawrence Island. The results of this study indicate that the benthos is an excellent long-term indicator of both local and physical advective processes. In addition, this work provides further evidence that secondary production on arctic shelves can be significantly augmented by reduced carbon advected from highly productive adjacent shelves.     

Closed-form solution of P4P or the three-dimensional resection problem in terms of Möbius barycentric coordinates

 The perspective 4 point (P4P) problem - also called the three-dimensional resection problem - is solved by means of a new algorithm: At first the unknown Cartesian coordinates of the perspective center are computed by means of M?bius barycentric coordinates. Secondly these coordinates are represented in terms of observables, namely space angles in the five-dimensional simplex generated by the unknown point and the four known points. Substitution of M?bius barycentric coordinates leads to the unknown Cartesian coordinates (2.8)–(2.10) of Box 2.2. The unknown distances within the five-dimensional simplex are determined by solving the Grunert equations, namely by forward reduction to one algebraic equation (3.8) of order four and backward linear substitution. Tables 1.–4. contain a numerical example. Finally we give a reference to the solution of the 3 point (P3P) problem, the two-dimensional resection problem, namely to the Ansermet barycentric coordinates initiated by C.F. Gau? (1842), A. Schreiber (1908) and A.␣Ansermet (1910). Received: 05 March 1996; Accepted: 15 October 1996     

Geometry and kinematics of dunes during steady and unsteady flows in the Calamus River, Nebraska, USA

The geometry and kinematics of river dunes were studied in a reach of the Calamus River, Nebraska. During day-long surveys, dune height, length, steepness, migration rate, creation and destruction were measured concurrently with bedload transport rate, flow depth, flow velocity and bed shear stress. Within a survey, individual dune heights, lengths and migration rates were highly variable, associated with their three-dimensional geometry and changes in their shape through time. Notwithstanding this variability, there were discernible changes in mean dune height, length and migration rate in response to changing discharge over several days. Changes in mean dune height and length lagged only slightly behind changes in discharge. Therefore, during periods of both steady and unsteady flow, mean dune lengths were quite close to equilibrium values predicted by theoretical models. Mean dune steepnesses were also similar to predicted equilibrium values, except during high, falling flows when the steepness was above that predicted. Variations in mean dune height and length with discharge are similar to those predicted by theory under conditions of low mean dune excursion and discharge variation with a short high water period and long low water period. However, the calculated rates of change of height of individual dunes vary considerably from those measured. Rates of dune creation and destruction were unrelated to discharge variations, contrary to previous results. Instead, creations and destructions were apparently the result of local variations in bed shear stress and sediment transport rate. Observed changes in dune height during unsteady flows agree with theory fairly well at low bed shear stresses, but not at higher bed shear stresses when suspended sediment transport is significant.     

Stable carbon isotope variations in northwest Europe during the last glacial–interglacial transition

Stable carbon isotope data that span part of the last glacial–interglacial transition (ca. 14-9 ka ¹⁴C BP; ca. 15–11 ka cal. BP), and which derive from organ-specific plant macrofossils recovered from two lake sediment profiles in the UK and one in Norway, are compared. The recorded temporal variations show similar trends, which, over a millennial time-scale appear to parallel the main drift in δ¹⁸O as determined for the GRIP ice-core. It is postulated that some smaller scale variations in the δ¹³C profiles may reflect the shorter term oscillations in δ¹⁸O values evident in the GRIP record, although this is less certain. Overall, however, the results suggest that stable carbon isotope measurements based on organ-specific terrestrial plant macrofossils may provide (i) a means for establishing correlations between terrestrial successions and (ii) additional paleoenvironmental information, as the apparent ‘shadowing’ of the GRIP record indicates a common forcing mechanism for both Greenland δ¹⁸O and northwest European δ¹³C variations. From the evidence available we suggest that the recorded δ¹³C variations reflect fluctuations in air temperature and/or changes in water vapour pressure in the atmosphere. © 1997 John Wiley & Sons, Ltd.     

Experiments on steady buoyancy transfer through turbulent fluid layers separated by density interfaces

A laboratory experiment was performed to investigate mixing across a density interface which separates two turbulent fluid layers and coexists with a stabilizing buoyancy flux. It was found that the buoyancy flux (q₀) across the interface and through the turbulent layers (of depth D) becomes steady and constant in magnitude in the vertical direction, only when , where u is the horizontal r.m.s. velocity at the base of the mixed layers. The results suggest that mixing across the density interface is controlled by a dynamically important buoyancy gradient induced in the turbulent layers and that parameters such as the bulk Richardson number, , where Δb is the interfacial buoyancy jump, are of secondary importance. Measurements are used to infer the mixing mechanism at the interface, the mixing efficiency of stratified fluids and the entrainment law. Some geophysical applications of the results are also discussed.