The disruption of planetary satellites and the creation of planetary rings

The Voyager spacecraft discovered that small moons orbit within all four observed ring systems coincident with the discovery of narrow and dusty rings around Jupiter, Saturn, Uranus and Neptune. These moons can provide the source for new rings if they are catastrophically disrupted by a comet or large meteoroid impact. This hypothesis for ring origins provides a natural mechanism for the ongoing creation of planetary rings. While it relieves somewhat the problem of explaining the continued existence of rings with apparently short evolutionary lifetimes, it raises the problem of explaining the continued existence of small moons, and the coexistence of moons and rings at comparable locations within the Roche zones of the giant planets. This problem has been studied in some detail recently, and the present work is a review of our current understanding of the processes in satellite disruption that pertain to the creation of planetary rings and the collisional cascade of circumplanetary bodies. Significant progress has been made. Narrow rings are produced by disruption of small moons in numerical simulations, and a self-consistent model of the collisional cascade can explain present-day moon populations. Absolute timescales and initial moon populations remain uncertain due to our poor knowledge of the impactor population and uncertainties in the strength of planetary satellites. More pressing are the qualitative issues that remain to be resolved including the nature of reaccretion of the debris and the origin of Saturn's rings.     

Observations of estuarine circulation and solitary internal waves in a highly energetic tidal channel

Despite vigorous tidal and wind mixing, observations in an estuarine tidal inlet in the Wadden Sea show that during part of the tidal cycle, vertical stratification and internal waves may still develop. Acoustic Doppler current profiler (ADCP) and conductivity, temperature, depth observations, collected over the past 6 years at 13 h anchor stations (ASs), reveal that these occur especially during slack tide, when there is little wind and large freshwater discharge from nearby Lake IJssel. Measurements with a moored ADCP show that in the same tidal phase, strong cross-channel circulation develops, which may suddenly reverse circulation sense due to passing density fronts. In the vertically stratified phase that follows after the front passage, propagating mode-one solitary internal waves are observed. These are resonantly generated during decelerating tidal ebb currents when the (shear) flow passes a transcritical regime (Froude number equal to 1). A combination of photographs (including one from the International Space Station), bathymetric data, and ASs data leads to the discovery of yet another source of internal waves in this area, produced during slackening tide by propagating lee waves that develop over a deep trench. We suggest that both the cross-channel circulation as well as the (solitary) internal waves may locally be of importance for the (re)distribution and transport of sediments and nutrients and may influence tidally averaged transports.     

The biogeochemical sulfur cycle in the marine boundary layer over the Northeast Pacific Ocean

The major components of the marine boundary layer biogeochemical sulfur cycle were measured simultaneously onshore and off the coast of Washington State, U.S.A. during May 1987. Seawater dimethylsulfide (DMS) concentrations on the continental shelf were strongly influenced by coastal upwelling. Concentration further offshore were typical of summer values (2.2 nmol/L) at this latitude. Although seawater DMS concentrations were high on the biologically productive continental shelf (2–12 nmol/L), this region had no measurable effect on atmospheric DMS concentrations. Atmospheric DMS concentrations (0.1–12 nmol/m³), however, were extremely dependent upon wind speed and boundary layer height. Although there appeared to be an appreciable input of non-sea-salt sulfate to the marine boundary layer from the free troposphere, the local flux of DMS from the ocean to the atmosphere was sufficient to balance the remainder of the sulfur budget.     

A new algorithm to estimate sky condition based on 5 minutes-averaged values of clearness index and relative optical air mass

Summary This work describes a new algorithm to characterize sky condition in intervals of 5 min using four categories of sun exposition: apparent sun with cloud reflection effects; apparent sun without cloud effects; sun partially concealed by clouds; and sun totally concealed by clouds. The algorithm can also be applied to estimate hourly and daily sky condition in terms of the traditional three categories: clear, partially cloudy and cloudy day. It identifies sky conditions within a confidence interval of 95% by minimizing local climate and measurement effects. This is accomplished by using a logistic cumulative probability function to characterize clear sky and Weibull cumulative probability function to represent cloudy sky. Both probability functions are derived from frequency distributions of clearness index, based on 5 minutes-averaged values of global solar irradiance observed at the surface during a period of 6 years in Botucatu, Southeastern of Brazil. The relative sunshine estimated from the new algorithm is statistically comparable to the one derived from Campbell-Stocks sunshine recorder for both daily and monthly values. The new method indicates that the highest frequency of clear sky days occurs in Botucatu during winter (66%) and the lowest during the summer (38%). Partially cloudy condition is the dominant feature during all months of the year.     

Observed nonpotential magnetic fields and the inferred flow of electric currents at a location of repeated flaring

We have analyzed the vector magnetic field of an active region at a location of repeated flaring to determine the nature of the currents flowing in the areas where the flares initiated. The component of electric current density crossing the photosphere along the line-of-sight was derived from the observed transverse component of the magnetic field. The maximum concentrations of these currents occurred exactly at the sites of flare initiation and where the photospheric field was sheared the most. The calculated distribution of current density at the flare sites suggested that currents were flowing out of an area of positive magnetic polarity and across the magnetic inversion line into two areas of negative polarity. This interpretation was reinforced by a calculation of the source field, the magnetic field produced in the photosphere by the electric currents above the photosphere. In the vicinity of the flare sites, the calculated source field exhibited three particular characteristics: (1) maximum magnitudes at the sites of flare initiation, (2) a rotational direction where the vertical current density was concentrated, and (3) a fairly constant angular orientation with the magnetic inversion line. The source field was thus very similar to the field produced by two arcades of currents crossing the inversion line at the locations of greatest magnetic shear with orientations of about 60° to the inversion line. With this orientation, the inferred arcades would be aligned with the observed chromospheric fibrils seen in the H data so that the currents were field-aligned above the photosphere. The field thus exhibited a vertical gradient of magnetic shear with the shear decreasing upward from the photosphere. We estimated the currents in the two arcades by matching the source field derived from observations with that produced by a model of parallel loops of currents. We found that the loops of the model would each have a radius of 4500 km, a separation of 1830 km, and carry a current of 0.15 × 10¹² A. Values of vertical current densities and source fields appearing in the umbrae of the two large sunspots away from the flare sites were shown to lie at or below the level of uncertainty in the data. The main source of this uncertainty lay in the method by which the 180° ambiguity in the azimuth of the transverse field is resolved in umbral areas. We thus concluded that these quantities in large umbrae should be treated with a healthy skepticism. Finally, we found that the source field at the flare sites was produced almost entirely by the angular difference between the observed and potential field and not by the difference in field intensity.     

The garnet-clinopyroxene Fe-Mg geothermometer — a reinterpretation of existing experimental data

Experimental data on the partitioning of Fe²⁺ and Mg between garnet and clinopyroxene (Råheim and Green 1974; Mori and Green 1978; Ellis and Green 1979) have been used to construct a new expression for the garnet-clinopyroxene geothermometer, including a curvilinear relationship between In Kd and X _Ca(ga): T(°C)=((-6173(X_Ca)²+6731 X _Ca+1879 +10 P(kb))/(lnKd+1.393))–273Application of this geothermometer to a suite of samples of eclogites and associated omphacite-garnet-bearing gneisses from the uppermost allochthon within the North Norwegian Caledonides shows that the calculated temperatures do not vary with rather great variations in the mg number of the garnet (0.17–0.54) and Na content of the clinopyroxene (0.11–0.44). Temperatures below 900° C calculated using the present equation are somewhat lower than those obtained by the method of Powell (1985), the difference being larger for lower temperatures and lower values of X _Ca.     

Compositional Zoning of the Bishop Tuff

Compositional data for >400 pumice clasts, organized accordingto eruptive sequence, crystal content, and texture, providenew perspectives on eruption and pre-eruptive evolution of the>600 km³ of zoned rhyolitic magma ejected as the Bishop Tuffduring formation of Long Valley caldera. Proportions and compositionsof different pumice types are given for each ignimbrite packageand for the intercalated plinian pumice-fall layers that eruptedsynchronously. Although withdrawal of the zoned magma was lesssystematic than previously realized, the overall sequence displaystrends toward greater proportions of less evolved pumice, morecrystals (0·5–24 wt %), and higher FeTi-oxide temperatures(714–818°C). No significant hiatus took place duringthe 6 day eruption of the Bishop Tuff, nearly all of which issuedfrom an integrated, zoned, unitary reservoir. Shortly beforeeruption, however, the zoned melt-dominant portion of the chamberwas invaded by batches of disparate lower-silica rhyolite magma,poorer in crystals than most of the resident magma but slightlyhotter and richer in Ba, Sr, and Ti. Interaction with residentmagma at the deepest levels tapped promoted growth of Ti-richrims on quartz, Ba-rich rims on sanidine, and entrapment ofnear-rim melt inclusions relatively enriched in Ba and CO₂.Varied amounts of mingling, even in higher parts of the chamber,led to the dark gray and swirly crystal-poor pumices sparselypresent in all ash-flow packages. As shown by FeTi-oxide geothermometry,the zoned rhyolitic chamber was hottest where crystal-richest,rendering any model of solidification fronts at the walls orroof unlikely. The main compositional gradient (75–195ppm Rb; 0·8–2·2 ppm Ta; 71–154 ppmZr; 0·40–1·73% FeO*) existed in the melt,prior to crystallization of the phenocryst suite observed, whichincluded zircon as much as 100 kyr older than the eruption.The compositions of crystals, though themselves largely unzoned,generally reflect magma temperature and the bulk compositionalgradient, implying both that few crystals settled or were transportedfar and that the observed crystals contributed little to establishingthat gradient. Upward increases in aqueous gas and dissolvedwater, combined with the adiabatic gradient (for the 5 km depthrange tapped) and the roofward decline in liquidus temperatureof the zoned melt, prevented significant crystallization againstthe roof, consistent with dominance of crystal-poor magma earlyin the eruption and lack of any roof-rind fragments among theBishop ejecta, before or after onset of caldera collapse. Amodel of secular incremental zoning is advanced wherein numerousbatches of crystal-poor melt were released from a mush zone(many kilometers thick) that floored the accumulating rhyoliticmelt-rich body. Each batch rose to its own appropriate levelin the melt-buoyancy gradient, which was self-sustaining againstwholesale convective re-homogenization, while the thick mushzone below buffered it against disruption by the deeper (non-rhyolitic)recharge that augmented the mush zone and thermally sustainedthe whole magma chamber. Crystal–melt fractionation wasthe dominant zoning process, but it took place not principallyin the shallow melt-rich body but mostly in the pluton-scalemush zone before and during batchwise melt extraction. KEY WORDS: Bishop Tuff; ignimbrite; magma zonation; mush model; rhyolite     

Measurement of stress effects (scope for growth) and contaminant levels in mussels (Mytilus edulis) collected from the Irish Sea

The objective of this research was to quantify the impact of pollution along the coastlines of the Irish Sea. Pollution assessment was based on the combined measurement of scope for growth (SFG), and chemical contaminants in the tissues of mussels (Mytilus edulis) collected from 38 coastal sites around the Irish Sea during June-July in 1996 and 1997. On the UK mainland coast, the SFG showed a general trend with a significant decline in water quality in the Liverpool and Morecambe Bay region. High water quality was recorded along the west coast of Wales, as well as southwest England and northwest Scotland (clean reference sites outside the Irish Sea). Along the coast of Ireland there was a similar trend with reduced SFG within the Irish Sea region. SFG was generally low north of Duncannon and then improved north of Belfast. The poor water quality on both sides of the Irish Sea is consistent with the prevailing hydrodynamics and the spatial distribution of contaminants associated with urban/ industrial development. The decline in SFG of mussels on both sides of the Irish Sea was associated with a general increase in contaminant levels in the mussels. Certain contaminants, including PAHs, TBT, sigmaDDT, Dieldrin, gamma-HCH, PCBs, and a few of the metals (Cd, Se, Ag, Pb), showed elevated concentrations. Many of these contaminants were particularly elevated in the coastal margins of Liverpool Bay, Morecambe Bay and Dublin Bay. A quantitative toxicological interpretation (QTI) of the combined tissue residue chemistry and SFG measurements indicated that at the majority of coastal sites, c. 50 to > 80% of the observed decline in SFG was due to PAHs as a result of fossil fuel combustion and oil spills. TBT levels were highest at major ports and harbours, but these concentrations only made a minor contribution to the overall reduction in SFG. At no sites were individual metals accumulated to concentrations that could cause a significant effect on SFG. The study identified many sites where the observed reduction in SFG was far greater than predicted from the limited number of chemical contaminants analysed, thus indicating the presence of additional 'unknown toxicants'. Sewage (containing domestic, agricultural and industrial components) appears to be an important contributor to reduced SFG and linear alkylbenzenes (LABs) and As may provide suitable 'sewage markers'. There was a highly significant positive correlation between SFG and As (P < 0.001). This relationship may be due to reduced As uptake by algal food material and mussels at sites with elevated P04 concentrations (e.g. at sites with sewage inputs). Phosphate is a known competitive inhibitor of As accumulation, at least in algae. The results highlight that further research is required on 'sewage markers' in mussels. The SFG approach therefore provides a rapid, cost-effective and quantitative measure of pollution impact, as well as a means of identifying the causes through a QTI of tissue contaminants levels. It also serves to identify the presence of unidentified toxicants and areas that require further study.     

A sedimentary record of the rise and fall of the metal industry in Bergslagen,south central Sweden

Detailed stratigraphic analyses of sediments deposited in Lake Botjärnen, a small boreal forest lake in the shield terrain of central Sweden, clearly reflect progressively increasing human impact on terrestrial and aquatic ecosystems following settlement and establishment of an iron industry in the 17th century. Rising frequencies of pollen and spores from light-demanding plants provide evidence of extensive forest clearance for charcoal and timber production, which peaked in the early 20th century. An associated increase in catchment erosion is reflected by changing carbon and nitrogen elemental content and carbon–isotope composition of sediment organic matter and by increased magnetic susceptibility of the sediments. Records of air-borne pollutants (lead, zinc and sulphur) can be correlated to the development of local and regional mining and metal industry as inferred from historical accounts. Rapid recession of the iron industry led to re-forestation and recovery of the aquatic nutrient status to pre-industrial conditions over the past 100 years. The chronology of the sediment succession, which is based on ²¹⁰Pb and ¹³⁷Cs radionuclide data in combination with radiocarbon dating, is confirmed by historical lead pollution trends established for the region.