Downstream geomorphic impacts of large dams: the case of Glenbawn Dam,NSW

Downstream hydrologic effects since the closure of Glenbawn Dam, a large dual-purpose storage for water conservation and flood mitigation, include: (i) a reduction in mean annual runoff of about 21 × 10⁶ m³; (ii) a change in the probability distribution of mean daily flows involving a truncation of flows >;8 × 10⁶ m³ d^?1, a much reduced frequency of flows >7 × 10⁵ m³ d^?1 and an increased frequency of flows <7 × 10⁵ m³ d^?1; and (iii) a reduction in flood magnitude of at least 80 per cent for all probabilities of exceedance. From suspended sediment samples collected before and after dam closure, sediment trap efficiency has been estimated at 99 per cent.An accommodation adjustment of the channel has occurred upstream of the first unregulated tributary because the bed is armoured, the banks are well vegetated, some bedrock and concrete controls are present and all regulated releases are incompetent to transport the bed material. Immediately downstream of the first unregulated tributary, the channel has contracted by up to 45 per cent and degraded by up to 69 per cent during lateral migration. Further downstream no channel changes were recorded although the bed material has progressively coarsened over time.     

Excitation mechanism of atmospheric pressure waves from the 1980 Mount St Helens eruption

Summary. Atmospheric pressure waves from the Mount St Helens eruption 1980 May 18 have been clearly recorded by a sensitive microbarograph at Berkeley, California. The record shows three types of waves with different group velocities. The pressure waves can be interpreted in terms of direct waves A1, antipodean travelling waves A2 and circumnavigating waves A3, all of which are composed of several acoustic-gravity modes propagated in the lower atmosphere. Synthetic barograms appropriate to the Berkeley station have been calculated on the basis of the dynamic response of the lower atmospheric structure, together with various assumptions of source properties. Comparisons between synthetic and observed barograms provide estimates for ranges of the time history of upward particle velocity at the source, source dimensions and the velocity of the source spreading over the blast zone, as well as for the average dissipation effects over the circumferential path. The results suggest that two major compression pulses on the A1 record correlate with the arrival of pressure waves from the first (lateral) blast and second (vertical) blast, although the inferred interblast time interval is not consistent with that estimated from seismic observations.     

Numerical simulation of comet nuclei I. Water-ice comets

A one-dimensional simulation of pure water-ice cometary nuclei is presented, and the effect of the nucleus as a heat reservoir is considered. The phase transition from amorphous to crystalline ice is studied for two cases: (1) where the released latent heat goes entirely into heating adjacent layers and (2) where the released latent heat goes entirely into sublimation. For a Halley-like orbit it was found that for case 1 the phase boundary penetrates about 15 m on the first orbit and does not advance until sublimation brings the surface to some 10 m from the phase boundary. For case 2 the phase boundary penetrates about 1 m below the surface and remains at this depth as the surface sublimates. For an orbit like that of Schwassmann-Wachmann 1 the phase boundary penetrates about 50 m initially for case 1 and about 1 m for case 2. There is no further transformation until the entire comet is heated slowly to near the transition temperature, after which the entire nucleus is converted to crystalline ice. For an Encke-type orbit case 1 gives a nearly continuous transition of the entire nucleus to crystalline ice, while for case 2 the initial penetration is about 8 m and remains at this depth relative to the surface as sublimation decreases the cometary radius. Thus the entire comet is converted to crystalline ice just before it is completely dissipated.     

X-ray synchrotron emission from the oblique shock in the jet of the powerful radio galaxy 3C 346

We report the first detection, with Chandra , of X-ray emission from the jet of the powerful narrow-line radio galaxy 3C 346. X-rays are detected from the bright radio and optical knot at which the jet apparently bends by approximately 70°. The Chandra observation also reveals a bright galaxy-scale atmosphere within the previously known cluster and provides a good X-ray spectrum for the bright core of 3C 346. The X-ray emission from the knot is synchrotron radiation, as seen in lower-power sources. In common with these sources, there is evidence of morphological differences between the radio/optical and X-ray structures, and the spectrum is inconsistent with a one-component continuous-injection model. We suggest that the X-ray-bright knot is associated with a strong oblique shock in a moderately relativistic, light jet, at ∼ 20° to the line of sight, and that this shock is caused by the jet interacting with the wake in the cluster medium behind the companion galaxy of 3C 346. The general jet curvature can result from pressure gradients in the cluster atmosphere.     

Neutron capture measurements on radioactive93Zr

Neutron capture measurements made on a sample of fission-product zirconium containing 20%⁹³Zr(t _1/2=1.5×10⁶a) at the Oak Ridge Electron Linear Accelerator time-of-flight facility resulted in the identification of 138 resonance peaks for the⁹³Zr isotope at neutron energies up to 21.5 keV. Average capture cross sections from 20 to 300 keV were derived by subtracting neutron capture yields of the stable zirconium isotopes^{90, 91, 92, 94, 96}Zr and additional backgrounds. The average cross sections found were significantly less than those of JENDL-1. While generally 30% higher than those of ENDF/B —V below 60 keV, the binned data overlapped the smooth ENDF/B —V curve. The average for a Maxwellian neutron spectrum withkT=30 keV is (95±10) mb and the resonance contribution to the capture resonance integral is (15.0±0.5)b.Research sponsored by the U.S. Department of Energy, Office of Basic Energy Sciences, under contract DE-AC05-840R21400 with the Martin Marietta Energy Systems, Inc.     

Deep-ocean piezometer probe technology for geotechnical investigations

Two single-sensor piezometer probes, 8 mm in diameter, were developed for deep-ocean geotechnical investigations. These probes were tested in a hyperbaric chamber pressurized to 55 MPa (8000 psi). Testing was performed for a period of five weeks under high hydrostatic pressure with the probes inserted in reconstituted illitic marine sediment. Small differential pore-water pressures were generated in response to both mechanically and thermally generated forcing functions. During deep-ocean simulated pressure tests, the sensors exhibited excellent sensitivity and stability. These developments in piezometer-probe technology provide a quantitative means of assessing important geotechnical parameters of fine-grained seabed deposits.     

Theoretical properties of radio-galaxies

A complete sample of symmetric double radio-galaxies has been investigated by inferring the propagation of a jet along the radio-axis and computing velocities with the aid of different models. A best linear fit between radio-luminosity and velocity is proposed in the range 10⁴⁰ ergs s^–145 ergs s^–1.     

Generalized strain probing of constitutive models

Advanced material constitutive models are used to describe complex soil behaviour. These models are often used in the solution of boundary value problems under general loading conditions. Users and developers of constitutive models need to methodically investigate the represented soil response under a wide range of loading conditions. This paper presents a systematic procedure for probing constitutive models. A general incremental strain probe, 6D hyperspherical strain probe (HSP), is introduced to examine rate‐independent model response under all possible strain loading conditions. Two special cases of HSP, the true triaxial strain probe (TTSP) and the plane‐strain strain probe (PSSP), are used to generate 3‐D objects that represent model stress response to probing. The TTSP, PSSP and general HSP procedures are demonstrated using elasto‐plastic models. The objects resulting from the probing procedure readily highlight important model characteristics including anisotropy, yielding, hardening, softening and failure. The PSSP procedure is applied to a Neural Network (NN) based constitutive model. It shows that this probing is especially useful in understanding NN constitutive models, which do not contain explicit functions for yield surface, hardening, or anisotropy. Copyright © 2004 John Wiley & Sons, Ltd.