Paleoclimatic changes in southern Africa during the intensification of Northern Hemisphere glaciation: evidence from ODP Leg 175 Site 1085

Pliocene age sediments from Ocean Drilling Program Leg 175, Site 1085-A and B in the Cape Basin were analyzed to investigate the impact of the intensification of Northern Hemisphere glaciation (INHG) on the South Atlantic Benguela Current system from 4 to 2 Ma. Proxies for productivity (concentrations and mass accumulation rates of total organic carbon, carbon to nitrogen ratios, percent calcium carbonate, and percent biogenic silica) as well as weight percent sand (a proxy for preservation or winnowing) peak at 3.2, 3.0, 2.4, and 2.25 Ma. Normative calculations of allied trace and major elemental determinations indicate synchronous increases in productivity peaks, as well as high concentrations and accumulations of terrigenous sediments. Coeval increases in hemipelagic sedimentation and productivity indicators could be the result of enhanced eolian sedimentation resulting from strengthened winds, leading to elevated rates of upwelling and enhanced productivity. However, rapid burial, as indicated by high sedimentation rates, could also enhance preservation. The very high concentrations (>30%) and accumulations (up to 60 g/cm²/kyr) limit the likelihood that eolian sedimentation was the only transport mechanism, invoking an additional fluvial source. Rapid burial by either eolian or fluvial transport links these intervals of enhanced preservation and productivity with continental climate changes resulting from (1) increased winds and/or dust availability due to higher aridity in the Namibia/northern South Africa region; (2) lowered sea-level related to increased ice volume; (3) increased sediment load due to wetter conditions in the continental interior; or (4) some combination. Peaks at 3.2, 2.4 and 2.25 Ma are coincident with maximum precession, suggesting a link between hemipelagic sedimentation and enhanced monsoonal circulation over southern Africa. The Site 1085 sedimentary record during the INHG seems to be controlled by low-latitude processes linked to precession rather than hig-latitude processes.     

Comparative assessment of baseline concentration of the heavy metals in the soils of Tehran (Iran) with the comprisable reference data

Industrial soil systems have become complex due to human activities, as they disturb the natural development of soil and add hazardous elements. Hence, there is a growing public concern over the accumulation of heavy metals in soil due to the rapid industrial development during the last decade in Iran. The objectives of the present study are to carry out comparative assessment of the heavy metals in soils of the Chitgar Industrial Area Tehran (Iran) with average world guidelines and to evaluate enrichment and normalized scatter coefficient. In this work the concentrations of seven heavy metals (Cr, Co, Cd, Cu, Pb, Ni and Zn) from the surface soils of the industrial area were quantified, based on 210 samples collected from 70 sampling stations in three consecutive seasons May 2007, November 2007 and May 2008 using 0.5 × l Km square mesh. Common comparison methods were employed to assess the quality of soils and guideline values were used to represent a desired level of elements. Comparison variables and enrichment factor showed that Pb has high-level value while normalized scatter coefficient demonstrates that Cd increases in soils more rapidly as compared to other elements. This study revealed that normalized scatter coefficient can be effectively used to evaluate soil pollution and is independent of the past.     

Climate Change Impacts for the Conterminous USA: An Integrated Assessment

Here we simulate dryland agriculture in the United States in order to assess potential future agricultural production under a set of general circulation model (GCM)-based climate change scenarios. The total national production of three major grain crops—corn, soybeans, and winter wheat—and two forage crops—alfalfa and clover hay—is calculated for the actual present day core production area (CPA) of each of these crops. In general, higher global mean temperature (GMT) reduces production and higher atmospheric carbon dioxide concentration ([CO₂]) increases production. Depending on the climatic change scenarios employed overall national production of the crops studied changes by up to plus or minus 25% from present-day levels. Impacts are more significant regionally, with crop production varying by greater than ±50% from baseline levels. Analysis of currently possible production areas (CPPAs) for each crop indicates that the regions most likely to be affected by climate change are those on the margins of the areas in which they are currently grown. Crop yield variability was found to be primarily influenced by local weather and geographic features rather than by large-scale changes in climate patterns and atmospheric composition. Future US agronomic potential will be significantly affected by the changes in climate projected here. The nature of the crop response will depend primarily on to what extent precipitation patterns change and also on the degree of warming experienced.     

Structural control of Au–Pd mineralization (Jacutinga): An example from the Cauê Mine, Quadrilátero Ferrífero, Brazil

Precambrian banded iron formations (BIFs) in the Quadrilátero Ferrífero host a special kind of Au–Pd mineralization known as Jacutinga. The main orebodies are hosted within the Cauê Syncline, a SW-verging fold that involves Paleoproterozoic metasedimentary rocks in the Itabira District, a regional synclinorium with BIFs in the core of synclinal folds in the northeastern part of Quadrilatéro Ferrífero, Minas Gerais. Structural analysis reveals two important features of the district: the polydeformed character of the rocks and the importance of brittle structures in the control of the orebodies. Two deformational events are recognized in this area. The first event developed the main foliation, S1, that is the enveloping surface of the Cauê Syncline. The second event is better defined in the northern boundary of the structure where it is represented by a right-lateral wrench fault zone that has developed a foliation, S2, that truncates S1. This wrench fault was also responsible for the development of a system of fractures (Frm) that host the Au–Pd mineralization. The auriferous bodies of Cauê Syncline (Y, X, Área Central, Aba Norte, Noroeste and Aba Leste/Aba Leste Inferior) were generated during this second event. Shear fractures (R, R′ and P) and tension fractures (T) developed in response to the wrench fault system under brittle conditions. The best-developed, and most commonly mineralized fractures are R and T in all auriferous bodies. Elsewhere, the best mineralization occurs in the contacts of hematite bodies (soft/hard) and intrusive rocks with fractured itabirites. Other mineralization (Aba Norte, Área Central and X) is hosted on the contacts of other units.A system of fractures, as well as their intersections, thus represents the structural control on Jacutinga bodies and is responsible for the geometry of the orebodies. Of importance, there is no control by mineral/stretching lineations, fold axes and other ductile structure on the geometry and plunge of the orebodies.     

Iterative implicit integration procedure for hybrid simulation of large nonlinear structures

A fully implicit iterative integration procedure is presented for local and geographically distributed hybrid simulation of the seismic response of complex structural systems with distributed nonlinear behavior. The purpose of this procedure is to seamlessly incorporate experimental elements in simulations using existing fully implicit integration algorithms designed for pure numerical simulations. The difficulties of implementing implicit integrators in a hybrid simulation are addressed at the element level by introducing a safe iteration strategy and using an efficient procedure for online estimation of the experimental tangent stiffness matrix. In order to avoid physical application of iterative displacements, the required experimental restoring force at each iteration is estimated from polynomial curve fitting of recent experimental measurements. The experimental tangent stiffness matrix is estimated by using readily available experimental measurements and by a classical diagonalization approach that reduces the number of unknowns in the matrix. Numerical and hybrid simulations are used to demonstrate that the proposed procedure provides an efficient method for implementation of fully implicit numerical integration in hybrid simulations of complex nonlinear structures. The hybrid simulations presented include distributed nonlinear behavior in both the numerical and experimental substructures. Copyright © 2010 John Wiley & Sons, Ltd.     

A multidisciplinary approach to evaluating impacts of shellfish aquaculture on benthic communities

The impact of suspended mussel culture (Mytilus edulis, M. trossulus) on the benthos of a small Nova Scotia cove (7 m depth) was assessed using meehods involving both benthic metabolism and community structure. Due to deposition of mussel feces and pseudofeces, sedimentation rate was higher under the mussel culture lines than at an adjacent reference site of similar sediment texture. Porewater profiles of sediment sulfate and sulfide indicated greater anaerobic metabolism at the mussel site than at the reference site, but sulfide was absent from the upper centimeters of sediments under the mussels. Seasonal measures of sediment oxygen demand showed little change between sites, but maximum rates of ammonium release at the mussel site were twice the highest rates measured at the reference site. Abundance of benthic macrofauna was higher at the reference site, but biomass was generally lower. Biomass at the mussel site was dominated by molluscs (Ilyanassa spp. andNucula tenuisulcata), that were attracted to mussels fallen from the culture and/or enriched organic matter due to biodeposition. Species diversity was lower at the reference site due to the dominance of the polychaeteNephtys neotena. Abundance-biomass comparisons (ABC method) of faunal analysis did not indicate any impact of biodeposition at this site: however, disturbance did not result in a typical assemblage of small opportunistic species anticipated with this method. Cluster analysis of macrofauna usually provided a clear separation between the sites. Since the contruction of a causeway (1968), foraminifera species composition showed a temporal response to temperature changes in the cove by shifting toward calcareous species, but assemblages downcore showed little or no relationship to aquaculture impacts. Although there is a shift toward anaerobic metabolism at the mussel lines, the impact of mussels falling to the sediments was more noticeable in benthic community structure than was any impact due to organic sedimentation or hypoxia. In general the impact of aquaculture on the benthos appeared to be minor. Furtyher assesment of these consequences may mandate both taxonomic and energetic approaches to impact assessment.     

Role of time variant and invariant terms on soil moisture spatio-temporal variability in a subhumid coastal wetland

The knowledge of soil moisture spatio-temporal variability is highly relevant for water resources management. This paper reports an analysis of the spatial–temporal variability of soil moisture data for a small to medium-scale soil-sensors network in a coastal wetland of southwestern Spain. Measurements were taken from five sites located in the Doñana National Park over the time-period of one hydrological year from September 2017 to September 2018. The total area of the soil-sensors network shows an extension about 25 × 3 km. Soil moisture data was separated into time invariant (the temporal mean of the whole period at each site) and time-variant terms (the deviations of soil moisture from the mean, or anomalies). The time-invariant component was generally the main contributor to the total spatial variance of soil moisture and it was mostly controlled by the groundwater levels in the area. Nevertheless, the time variant terms have a huge effect on soil moisture variability in very dry states. Characteristic convex time-dependent patterns for this field site were found between spatially averaged soil moisture and its variability. This information could be used for the up and downscaling of soil moisture from satellite data. Those patterns of relation between spatial mean and variability of soil moisture were only affected by heavy rainfalls giving rise to hysteretic behaviour. This study shows that even though groundwater level is a time-variant variable, it significantly affects soil moisture's time-variant but also time-invariant terms due to the different average groundwater level depths at the different sites.     

Patterns of urban settlements in Somalia

In this research paper attempts have been made to analyze the distribution of 68 urban settlements in 14 regions of the country. The value of near-neighbour statistic (R) shows nearly random pattern of urban settlements in some regions and approachingly uniform distribution of urban settlements in other regions. Regional distribution of urban settlements and their growth have been explained in context of region's geographical, economic and industrial frameworks.     

Exhumation of the Dayman dome metamorphic core complex, eastern Papua New Guinea

The ～750 km² Dayman dome of the Late Cretaceous Suckling‐Dayman massif, eastern Papua New Guinea, is a domed landform that rises to an elevation of 2850 m. The northern edge of the dome is a fault scarp >1000 m high that is now part of an active microplate boundary separating continental crust of the New Guinea highlands from continental and oceanic crust of the Woodlark microplate. Previous work has shown that a parallel belt of eclogite‐bearing core complexes north‐east of the Dayman dome were exhumed from up to 24–28 kbar in the last few millions of years. The remarkably fresh and lightly eroded scarp of the Dayman dome exposes shallowly‐dipping mylonitic (S1) metabasite rocks (500 m thick) on the northern flank of Mount Dayman. Field relationships near the base of this scarp show a cross cutting suite of ductile and brittle meso‐structures that includes: (i) rare ductile S2 folia with a shallowly ESE‐plunging mineral elongation lineation defined by sodic‐calcic blue amphibole; (ii) narrow steeply‐dipping ductile D2 shear zones; and (iii) semi‐brittle to brittle fault zones. Pumpellyite‐actinolite facies assemblages reported by previous workers to contain local aragonite, lawsonite and/or glaucophane are found in the core of the complex at elevations greater than 2000 m. These assemblages indicate peak metamorphic pressures of 6–9.5 kbar, demonstrating exhumation of the core of the Dayman dome from depths of 20–30 km. The S1 metamorphic mineral assemblage in metabasite includes actinolite‐chlorite‐epidote‐albite‐quartz‐calcite‐titanite, indicative of greenschist facies conditions for the main deformation. New mineral equilibria modelling suggests that this S1 assemblage evolved at 5.9–7.2 kbar at ～425 °C. Modelling variable Fe³⁺ indicates that the sodic‐calcic blue amphibole (D2) formed under a higher oxidation state compared with the S1 assemblage, probably at <4.5 kbar. A SE‐dipping, Mio‐Pliocene sedimentary sequence (Gwoira Conglomerate) forms a hangingwall block juxtaposed by low‐angle fault contact with the metabasite footwall. Prehnite‐bearing D3 brittle fault zones separate the two blocks and likely accommodated the final exhumation of the S1 greenschist facies assemblage in the footwall. These results indicate that the extensive Mt Dayman fault surface coincides with a domed S1 greenschist facies foliation that was last active at >20 km depth. Exhumation of this foliation must therefore be controlled by brittle faults of the active microplate boundary that are largely not observed in the study area. The structural record of the final exhumation of the Dayman dome to the surface was likely lost as a result of erosion, poor exposure or wide spacing of semi‐brittle to brittle fault zones.     

Data-Driven Predictive Modeling of Mineral Prospectivity Using Random Forests: A Case Study in Catanduanes Island (Philippines)

The Random Forests (RF) algorithm is a machine learning method that has recently been demonstrated as a viable technique for data-driven predictive modeling of mineral prospectivity, and thus, it is instructive to further examine its usefulness in this particular field. A case study was carried out using data from Catanduanes Island (Philippines) to investigate further (a) if RF modeling can be used for data-driven modeling of mineral prospectivity in areas with few (i.e., <20) mineral occurrences and (b) if RF modeling can handle predictor variables with missing values. We found that RF modeling outperforms evidential belief (EB) modeling of prospectivity for hydrothermal Au–Cu deposits in Catanduanes Island, where 17 hydrothermal Au–Cu prospects are known to exist. Moreover, just like EB modeling, RF modeling allows analysis of the spatial relationships between known prospects and individual layers of predictor data. Furthermore, RF modeling can handle missing values in predictor data through an RF-based imputation technique whereas in EB modeling, missing values are simply represented by maximum uncertainty. Therefore, the RF algorithm is a potentially useful method for data-driven predictive modeling of mineral prospectivity in regions with few (i.e., <20) occurrences of mineral deposits of the type sought. However, further testing of the method in other regions with few mineral occurrences is warranted to fully determine its usefulness in data-driven predictive modeling of mineral prospectivity.