The plan shape of current ripples in relation to flow conditions

Two sets of empirical data on the relationship of the plan shape of current ripples to flow conditions previously thought incompatible are reconciled by taking explicit and necessary account of the effects of flow width relative to flow depth. The aspects of plan shape considered are the mean streamwise ripple wavelength and the wavelength, measured across the flow, of longitudinal features due to centrifugal instability formed on the backs of the ripples. A regression analysis connecting these attributes with flow conditions including the width-effect shows that the amount of unexplained variability is of the same order as the accumulated experimental errors, and suggests that the two sets of data are in excellent agreement. The relationship of the plan geometry to flow conditions is less simple than has sometimes been supposed, but ways are suggested in which the experimental results can be used to establish the hydraulics of past environments.     

Water quality in a polluted lowland stream with chronically depressed dissolved oxygen: Causes and effects

Abstract

The Whangamaire Stream (North Island, New Zealand) has high concentrations of nitrate nitrogen (NO^? ₃‐N), biochemical oxygen demand (BOD₅), and Kjeldahl nitrogen (TKN) as a result of catchment land use practices. The lower reaches of the stream drain intensively farmed land and have dissolved oxygen (DO) levels of 10–50% saturation. The dominant riparian vegetation, Apium nodiflorum, provides a large organic loading by intercepting nutrients in run‐off and then decaying in the stream channel. Water quality and reaeration aspects of the stream were studied in order to explain the observed low DO levels. Measurements of the reaeration coefficient at 20°C, K₂ ²⁰, using methyl chloride (CH₃Cl) as a gas tracer, yielded values of 1.1–3.0 d^?1 for the upper part of the study reach and 15.5–16.2 d^?1 for the lower reach (overall average 12.5 ± 2.5 d^?1). These were in agreement with values inferred from single‐station diurnal curve analysis, which also showed that respiration was dominant in the lower reach where photo‐synthetic activity was inhibited by shade. The relatively large reaeration coefficients ensure that parts of the stream do not become anoxic at night time. Better riparian management and reduced nutrient inputs are likely to improve stream water quality.     

A coupled hydro-mechanical model for subsurface erosion with analyses of soil piping and void formation

Acta Geotechnica - A coupled hydro-mechanical erosion model is presented that is used for studying soil piping and erosion void formation under practical, in-situ conditions. The continuum model...     

FluBiDi – a model to estimate flood based on runoff: validation using extreme and natural basin conditions

FluBiDi is a two-dimensional model created to simulate real events that can take days and months, as well as short events (minutes or hours) and inclusive laboratory tests. To verify the robustness of FluBiDi, it was tested using a previous study with both designed and real digital elevation models. The results highlight good agreement between the models (i.e. Mike Flood, SOBEK, ISIS 2D, and others) tested and FluBiDi (around 90% for a specific instant and 95% for the complete time simulation). In the simulated hydrographs, the discharge peak value, time to peak, and water level results were accurate, reproducing them with an error of less than 5%. The velocity differences observed in a couple of tests in FluBiDi were associated with very short periods of time (seconds). However, FluBiDi is highly accurate for simulating floods under real topographical conditions with differences of around 2 cm when water depth is around 150 cm. The average water depth and velocities are precise, and the model describes with high accuracy the pattern and extent of floods. FluBiDi has the capability to be adjusted to different types of events and only requires limited input data.     

A generalized geo-hazard warning system

An automated geo-hazard warning system is the need of the hour. It is integration of automation in hazard evaluation and warning communication. The primary objective of this paper is to explain a geo-hazard warning system based on Internet-resident concept and available cellular mobile infrastructure that makes use of geo-spatial data. The functionality of the system is modular in architecture having input, understanding, expert, output and warning modules. Thus, the system provides flexibility in integration between different types of hazard evaluation and communication systems leading to a generalized hazard warning system. The developed system has been validated for landslide hazard in Indian conditions. It has been realized through utilization of landslide causative factors, rainfall forecast from NASA??s TRMM (Tropical Rainfall Measuring Mission) and knowledge base of landslide hazard intensity map and invokes the warning as warranted. The system evaluated hazard commensurate with expert evaluation within 5?C6?% variability, and the warning message permeability has been found to be virtually instantaneous, with a maximum time lag recorded as 50?s, minimum of 10?s. So it could be concluded that a novel and stand-alone system for dynamic hazard warning has been developed and implemented. Such a handy system could be very useful in a densely populated country where people are unaware of the impending hazard.     

Archean regional transpression and paleomagnetism in northwestern Ontario, Canada

The Archean metamorphic rocks of the Superior province of the Canadian Shield occur in lithologically defined belts or subprovinces. The tectonically more stable interiors of belts possess consistent primary components of magnetic remanence. In the case of the Quetico belt, these stable directions are tightly grouped about 005°/55° with some minor dispersion and most were acquired during the cooling that followed syntectonic recrystallisation.

This study examines the directions of primary remanence components for rocks along the margins of the Quetico belt, within 4 km of the strongly deformed vertical, ENE-trending boundaries. The boundaries are known to have experienced dextral transpression involving penetrative single-phase deformation which out-lasted metamorphism. Within a few kilometres of the belt boundaries, the primary remanence components are re-distributed along a vertical ENE-trending, great-circle girdle which is nearly parallel to the plane of transpressive shear and regional schistosity. It is suggested that the effects of transpression have mechanically deflected the components of primary remanence toward this plane.     

Morphosedimentary features and recent depositional architectural model of the Cantabrian continental margin

Multibeam bathymetry, high (sleeve airguns) and very high resolution (parametric system-TOPAS-) seismic records were used to define the morphosedimentary features and investigate the depositional architecture of the Cantabrian continental margin. The outer shelf (down to 180–245 m water depth) displays an intensively eroded seafloor surface that truncates consolidated ancient folded and fractured deposits. Recent deposits are only locally present as lowstand shelf-margin deposits and a transparent drape with bedforms. The continental slope is affected by sedimentary processes that have combined to create the morphosedimentary features seen today. The upper (down to 2000 m water depth) and lower (down to 3700–4600 m water depth) slopes are mostly subject to different types of slope failures, such as slides, mass-transport deposits (a mix of slumping and mass-flows), and turbidity currents. The upper slope is also subject to the action of bottom currents (the Mediterranean Water — MW) that interact with the Le Danois Bank favouring the reworking of the sediment and the sculpting of a contourite system. The continental rise is a bypass region of debris flows and turbidity currents where a complex channel-lobe transition zone (CLTZ) of the Cap Ferret Fan develops.The recent architecture depositional model is complex and results from the remaining structural template and the great variability of interconnected sedimentary systems and processes. This margin can be considered as starved due to the great sediment evacuation over a relatively steep entire depositional profile. Sediment is eroded mostly from the Cantabrian and also the Pyrenees mountains (source) and transported by small stream/river mountains to the sea. It bypasses the continental shelf and when sediment arrives at the slope it is transported through a major submarine drainage system (large submarine valleys and mass-movement processes) down to the continental rise and adjacent Biscay Abyssal Plain (sink). Factors controlling this architecture are tectonism and sediment source/dispersal, which are closely interrelated, whereas sea-level changes and oceanography have played a minor role (on a long-term scale).