Inelastic dynamic analysis of RC bridges accounting for spatial variability of ground motion,site effects and soil–structure interaction phenomena. Part 1: Methodology and analytical tools

During strong ground motion it is expected that extended structures (such as bridges) are subjected to excitation that varies along their longitudinal axis in terms of arrival time, amplitude and frequency content, a fact primarily attributed to the wave passage effect, the loss of coherency and the role of local site conditions. Furthermore, the foundation interacts with the soil and the superstructure, thus significantly affecting the dynamic response of the bridge. A general methodology is therefore set up and implemented into a computer code for deriving sets of appropriately modified time histories and spring–dashpot coefficients at each support of a bridge with account for spatial variability, local site conditions and soil–foundation–superstructure interaction, for the purposes of inelastic dynamic analysis of RC bridges. In order to validate the methodology and code developed, each stage of the proposed procedure is verified using recorded data, finite‐element analyses, alternative computer programs, previous research studies, and closed‐form solutions wherever available. The results establish an adequate degree of confidence in the use of the proposed methodology and code in further parametric analyses and seismic design. Copyright © 2003 John Wiley & Sons, Ltd.     

An experimental study of nominally symmetric and asymmetric structures isolated with the FPS

This experimental investigation deals with the earthquake behaviour of a nominally symmetric and a mass‐asymmetric three‐storey structural model isolated with the frictional pendulum system (FPS). Both accidental and natural torsion are evaluated in the structure by using recorded accelerations in all building floors and measured deformations at the isolation level. A 3D‐shaking table was used to subject the model to five different ground motions, including impulsive as well as far‐field subduction‐zone type earthquakes. Results show that the analytical predictions of the earthquake behaviour of the isolated structure, as obtained from a physical model of the FPS, are in close agreement with the true complex inelastic measured behaviour of the FPS. Besides, experimental results also validate previous observations about the importance of accounting for the variability of the normal loads in modelling the earthquake behaviour of FPS isolators. Measured torsional deformation amplifications at the base of the building vary, in the mean, from 2.5% to 6% for the symmetric and asymmetric structural configurations, respectively. In relation to the fixed base structure, the reduction factors for the base shear of the isolated structure are, in the mean, about 3.9 for both configurations. Finally, it is concluded that the FPS is capable of controlling the lateral–torsional motions of mass‐asymmetric structures quite effectively by aligning the centre of mass of the superstructure with the centre of pendular and frictional resistance of the isolation system. Copyright © 2003 John Wiley & Sons, Ltd.     

Two and Half Dimensional Simulation of Ridge Effects on the Ground Motion Characteristics

— Seismic responses of weathered and non-weathered ridge models were simulated to study the ridge effects on the ground motion characteristics. The range of ridge slope from 19.98° to 45° was considered to produce a possible set of generalized results. 2.5-D modeling based on parsimonious staggered grid approximation of elastodynamic wave equations was adopted in simulations. Computed results reveal an increase of amplitude of incoming waves with both elevation and the slope of the ridge. Further, the characteristics of surface waves are highly ridge slope dependent. The analysis of responses of weathered and non-weathered ridge models reveals that ridge has caused a strong generation of surface waves near its top. The surface waves are not dominating on the top of the ridge but at some lower elevation. The increase of weathering of ridge further intensified the ridge effect. Analysis in frequency domain, based on spectral ratio method, does not indicate any pattern in the spectral amplification factor and is very much sensitive to slope, source focal mechanism and location. However, on an average there is a continuous decrease of amplification with slope in the vertical component and increase in the transverse component, and it is increasing in the radial component up to slope =38.0° and thereafter decreasing.     

Lateral tidal mixing in the Antarctic marginal seas

Tidal mixing plays an important role in the modification of dense water masses around the Antarctic continent. In addition to the vertical (diapycnal) mixing in the near-bottom layers, lateral mixing can also be of relevance in some areas. A numerical tide simulation shows that lateral tidal mixing is not uniformly distributed along the shelf break. In particular, strong mixing occurs all along the Ross Sea and Southern Weddell Sea shelf breaks, while other regions (e.g., the western Weddell Sea) are relatively quiet. The latter regions correspond surprisingly well to areas where indications for cross-shelf exchange of dense water masses have been found. The results suggest that lateral tidal mixing may account for the relatively small contribution of Ross Sea dense water masses to Antarctic Bottom Water.     

Application of DARLAM to Regional Haze Modeling

— The CSIRO Division of Atmospheric Research limited area model (DARLAM) is applied to atmospheric transport modeling of haze in southeast Asia. The 1998 haze episode is simulated using an emission inventory derived from hotspot information and adopting removal processes based on SO₂.¶Results show that the model is able to simulate the transport of haze in the region. The model images closely resemble the plumes of NASA Total Ozone Mapping Spectrometer and Meteorological Service Singapore haze maps. Despite the limitation of input data, particularly for haze emissions, the three-month average pattern correlation obtained for the whole episode is 0.61. The model has also been able to reproduce the general features of transboundary air pollution over a long period of time. Predicted total particulate matter concentration also agrees reasonably well with observation.¶The difference in the model results from the satellite images may be attributed to the large uncertainties of emission, simplification of haze deposition and transformation mechanisms and the relatively coarse horizontal and vertical resolution adopted for this particular simulation.     

A Study of Oil Biodegradation in the Black Sea Water

A laboratory study was conducted to examine oil biodegradation in the presence of a fouling organism community. It is shown that the majority of fouling species exhibit relatively weak tolerance to oil. Oil degradation in seawater is shown to proceed quicker and more completely in the presence of the fouling organism community than it does without such organisms. The population of specific bacterial groups is shown first to grow and next decrease as a result of accumulation in water of toxic products of their vital activity. Oil biodegradation is found to cause substantial changes in the water hydrochemical characteristics in experimental vessels.     

Comment on: 'The 3D shear experiment over the Natih field in Oman: the effects of fracture-filling fluids on shear propagation' by C.M. van der Kolk, W.S. Guest and J.H.H.M. Potters

We find errors in theory and application in the paper by van der Kolk et al. (Geophysical Prospecting 49 , 179–197 (2001)) that invalidate their arguments for the cause of the reduction in the velocity of the vertically propagating slower split shear-wave in the gas cap over the Natih field in Oman. We suggest that existing theories are adequate and can explain the anomaly.     

A Comparison of Benzene and Toluene Plume Lengths for Sites Contaminated with Regular vs. Ethanol-Amended Gasoline

This article describes various statistical analyses of plume-length data to evaluate the hypothesis that the presence of ethanol in gasoline may hinder the natural attenuation of hydrocarbon releases. Plume dimensions were determined for gasoline-contaminated sites to evaluate the effect of ethanol on benzene and toluene plume lengths. Data from 217 sites in Iowa (without ethanol; set 1) were compared to data from 29 sites in Kansas that were contaminated by ethanol-amended gasoline (10% ethanol by volume; set 2). The data were log-normally distributed, with mean benzene plume lengths (± standard deviation) of 193 ± 135 feet for set 1 and 263 ± 103 feet for set 2 (36% longer). The median lengths were 156 feet and 263 feet (69% longer), respectively. Mean toluene plume lengths were 185± 131 feet for set 1 and 211 ±99 feet for set 2 (14% longer), and the median lengths were 158 feet and 219 feet (39% longer), respectively. Thus, ethanol-containing BTEX plumes were significantly longer for benzene (p < 0.05), but not for toluene. A Wilcoxon signed rank test showed that toluene plumes were generally shorter than benzene plumes, which suggests that toluene was attenuated to a greater extent than benzene. This trend was more pronounced for set 2 (with ethanol), which may reflect that benzene attenuation is more sensitive to the depletion of electron acceptors caused by ethanol degradation. These results support the hypothesis that the presence of ethanol in gasoline can lead to longer benzene plumes. The importance of this effect, however, is probably site-specific, largely depending on the release scenario and the available electron acceptor pool.     

Natural Gradient Tracer Test to Evaluate Natural Attenuation of MTBE Under Anaerobic Conditions

A natural gradient tracer test using perdeuterated MTBE was conducted in an anaerobic aquifer to determine the relative importance of dispersion and degradation in reducing MTBE concentrations in ground water. Preliminary ground water chemistry and hydraulic conductivity data were used to place the tracer within an existing dissolved MTBE plume at Port Hueneme, California. Following one year of transport, the tracer plume was characterized in detail.
Longitudinal dispersion was identified as the dominant mechanism for lowering the perdeuterated MTBE concentrations. The method of moments was used to determine the longitudinal and lateral dispersion coefficients (0.85 m²/day and 0.08 m²/day, respectively). A mass-balance analysis, carried out after one year of transport, accounted for 110% of the injected mass and indicated that no significant mass loss occurred. The plume structure created by zones of higher and lower hydraulic conductivity at the site was complex, consisting of several localized areas of high tracer concentration in a lower concentration plume. This is important because the aquifer has generally been characterized as exhibiting fairly minor heterogeneity. In addition, the tracer plume followed a curved flowpath that deviated from the more macroscopic direction of ground water flow inferred from local ground water elevation measurements and the behavior of the existing plume. Understanding the mass balance, plume structure, curvature of the tracer plume, and consequently natural attenuation behavior required the detailed sampling approach employed in this study. These data imply that a detailed understanding of site hydrogeology and an extensive sampling network may be critical for the correct interpretation of monitored natural attenuation of MTBE.