The extreme diversity of uranium deposits

Most available classifications of uranium deposits are based on the characteristics of the host rocks or on the morphology of the ore deposits. The aim of the present paper is to propose the basis for a genetic classification of these deposits. After a short introduction on the geochemical behavior of uranium in fluids and silicate melts and on the main uranium fractionation mechanisms operating in uranium-rich peraluminous, metaluminous, and peralkaline melts, the most recent metallogenic models of the main types of uranium deposits are shortly reviewed.     

In-well time-of-travel approach to evaluate optimal purge duration during low-flow sampling of monitoring wells

A common assumption with groundwater sampling is that low (<0.5 L/min) pumping rates during well purging and sampling captures primarily lateral flow from the formation through the well-screened interval at a depth coincident with the pump intake. However, if the intake is adjacent to a low hydraulic conductivity part of the screened formation, this scenario will induce vertical groundwater flow to the pump intake from parts of the screened interval with high hydraulic conductivity. Because less formation water will initially be captured during pumping, a substantial volume of water already in the well (preexisting screen water or screen storage) will be captured during this initial time until inflow from the high hydraulic conductivity part of the screened formation can travel vertically in the well to the pump intake. Therefore, the length of the time needed for adequate purging prior to sample collection (called optimal purge duration) is controlled by the in-well, vertical travel times. A preliminary, simple analytical model was used to provide information on the relation between purge duration and capture of formation water for different gross levels of heterogeneity (contrast between low and high hydraulic conductivity layers). The model was then used to compare these time–volume relations to purge data (pumping rates and drawdown) collected at several representative monitoring wells from multiple sites. Results showed that computation of time-dependent capture of formation water (as opposed to capture of preexisting screen water), which were based on vertical travel times in the well, compares favorably with the time required to achieve field parameter stabilization. If field parameter stabilization is an indicator of arrival time of formation water, which has been postulated, then in-well, vertical flow may be an important factor at wells where low-flow sampling is the sample method of choice.     

Uranium and thorium series nuclides in oriented ferromanganese nodules: growth rates,turnover times and nuclide behavior

Three ferromanganese nodules handpicked from the tops of 2500 cm² area box cores taken from the north equatorial Pacific have been analysed for their U-Th series nuclides.²³⁰Th_exc concentrations in the surface 1–2 mm of the top side of the nodules indicate growth rates of 1.8–4.6 mm/10⁶ yr. In two of the nodules a significant discontinuity in the²³⁰Th_exc depth profile has been observed at ～0.3 m.y. ago, suggesting that the nodule growth has been episodic. The concentration profiles of²³¹Pa_exc (measured via²²⁷Th) yield growth rates similar to the²³⁰Th_exc data. The bottom sides of the nodules display exponential decrease of²³⁰Th_exc/²³²Th activity ratio with depth, yielding growth rates of 1.5–3.3 mm/10⁶ yr.The²³⁰Th_exc and²³¹Pa_exc concentrations in the outermost layer of the bottom face are significantly lower than in the outermost layer of the top face. Comparison of the extrapolated²³⁰Th_exc/²³²Th and²³⁰Th_exc/²³¹Pa_exc activity ratios for the top and bottom surfaces yields an “age” of (5?15) × 10⁴ yr for the bottom relative to the top. This “age” most probably represents the time elapsed since the nodules have attained the present orientation.The²¹⁰Pb concentration in the surface ～0.1 mm of the top side is in large excess over its parent²²⁶Ra. Elsewhere in the nodule, up to ～1 mm depth in both top and bottom sides,²¹⁰Pb is deficient relative to²²⁶Ra, probably due to²²²Rn loss. The absence of²¹⁰Pb_exc below the outermost layer of the top face rules out the possibility of a sampling artifact as the cause of the observed exponentially decreasing²³⁰Th_exc and²³¹Pa_exc concentration profiles. The flux of²¹⁰Pb_exc to the nodules ranges between 0.31 and 0.58 dpm/cm² yr. The exhalation rate of²²²Rn, estimated from the²²⁶Ra-²¹⁰Pb disequilibrium is ～570 dpm/cm² yr from the top side and >2000 dpm/cm² yr from the bottom side.²²⁶Ra is deficient in the top side relative to²³⁰Th up to ～0.5–1 mm and is in large excess throughout the bottom. The data indicate a net gain of²²⁶Ra into the nodule, corresponding to a flux of (24?46) × 10^?3 dpm/cm² yr. On a total area basis the gain of²²⁶Ra into the nodules is <20% of the²²⁶Ra escaping from the sediments. A similar gain of²²⁸Ra into the bottom side of the nodules is reflected by the high²²⁸Th/²³²Th activity ratios observed in the outermost layer in contact with sediments.     

Frost risk mapping for landscape planning: A methodology

Summary Minimum air temperatures were measured during three winters with a network of stations in open, undulating terrain. It was observed that the change in minimum air temperature with elevation could be predicted from mean nighttime windspeed, total nighttime net radiation loss and a hill-top reference minimum temperature. It was also found that the deviation of temperatures at individual sites could be predicted from a local terrain parameter which reflects the extent of cold air accumulations. Thus a methodology for frost risk mapping has been developed which is based on regional weather dataand local terrain analysis. This paper describes the model and illustrates the regional weather and terrain effects with three-dimensional block diagrams.With 8 Figures     

Magnetic Anisotropy as an Aid to Identifying CRM and DRM in Red Sedimentary Rocks

To further evaluate the potential of magnetic anisotropy techniques for determining the origin of the natural remanent magnetization (NRM) in sedimentary rocks, several new remanence anisotropy measurement techniques were explored. An accurate separation of the remanence anisotropy of magnetite and hematite in the same sedimentary rock sample was the goal.In one technique, Tertiary red and grey sedimentary rock samples from the Orera section (Spain) were exposed to 13 T fields in 9 different orientations. In each orientation, alternating field (af) demagnetization was used to separate the magnetite and hematite contributions of the high field isothermal remanent magnetization (IRM). Tensor subtraction was used to calculate the magnetite and hematite anisotropy tensors. Geologically interpretable fabrics did not result, probably because of the presence of goethite which contributes to the IRM. In the second technique, also applied to samples from Orera, an anisotropy of anhysteretic remanence (AAR) was applied in af fields up to 240 mT to directly measure the fabric of the magnetite in the sample. IRMs applied in 2 T fields followed by 240 mT af demagnetization, and thermal demagnetization at 90°C to remove the goethite contribution, were used to independently measure the hematite fabric in the same samples. This approach gave geologically interpretable results with minimum principal axes perpendicular to bedding, suggesting that the hematite and magnetite grains in the Orera samples both carry a depositional remanent magnetization (DRM). In a third experiment, IRMs applied in 13 T fields were used to measure the magnetic fabric of samples from the Dome de Barrot area (France). These samples had been demonstrated to have hematite as their only magnetic mineral. The fabrics that resulted were geologically interpretable, showing a strong NW-SE horizontal lineation consistent with AMS fabrics measured in the same samples. These fabrics suggest that the rock's remanence may have been affected by strain and could have originated as a DRM or a CRM.Our work shows that it is important to account for the presence of goethite when using high field IRMs to measure the remanence anisotropy of hematite-bearing sedimentary rocks. It also shows that very high magnetic fields (>10 T) may be used to measure the magnetic fabric of sedimentary rocks with highly coercive magnetic minerals without complete demagnetization between each position, provided that the field magnetically saturates the rock.     

Magnetotelluric study of the Xuefeng mountain area,Hu’nan Province,China

A magnetotelluric study was carried out in the Xuefeng mountain uplift belt and its western margins. A detailed investigation was made of the resistivity of the formations, and reliable data were obtained. The sedimentary cover and basement structure of the Xuefeng mountain area and the deep geological structure were analyzed in detail using magnetotelluric data from the two-dimensional inversion of the resistivity profile data in combination with regional gravity and magnetic data. It was concluded that the tectonic movements were characterized by basement detachment, and north-south ramp. The study area can be divided into a southern uplift zone, a southern thrust-faulted zone, a central uplift zone, and a northern depression zone. This work has provided geophysical evidence that can be used in future studies of the tectonics and petroleum geology of this region.     

Structural and stratigraphical constraints on the kinematics history of the Southern Tan–Lu Fault Zone during the Mesozoic Anhui Province, China

The Tan–Lu Fault Zone (TLFZ) extends in a NNE–SSW direction for more than 2000 km in Eastern China. It has been considered either as a major sinistral strike-slip fault, as a suture zone or as a normal fault. We have conducted a structural analysis of the southern segment of this fault zone (STLFZ) in the Anhui Province. The ages (Triassic to Palaeocene) of the formations affected by the faults have been re-appraised taking into account recent stratigraphical studies to better constraint the ages of the successive stages of the kinematics of the STLFZ. Subsequently, the kinematics of the faults is presented in terms of strain/stress fields by inversion of the striated fault set data. Finally, the data are discussed in the light of the results obtained by previous workers.We propose the following history of the STLFZ kinematics during the Mesozoic. At the time of collision, a  NNE orientated Tan–Lu margin probably connected two margins located north of the Dabie and Sulu collision belts. During the Middle–Late Triassic, the SCB has been obliquely subducted below the NCB along this margin which has acted as a compressional transfer zone between the Dabie and Sulu continental subduction zones. The STLFZ has been initiated during the Early Jurassic and has acted as a sinistral transform fault during the Jurassic, following which the NCB/SCB collision stopped. A  NW-trending extension related to metamorphic domes was active during the basal Early Cretaceous ( 135–130 Ma); it has been followed by a NW–SE compression and a NE–SW tension during the middle–late Early Cretaceous ( 127 to  105 Ma, possibly  95 Ma); at that time the TLFZ was a sinistral transcurrent fault within the eastern part of the Asian continent. During the Late Cretaceous–Palaeocene, the STLFZ was a normal fault zone under a WNW–ESE tension.     

Estimating water balance components of tropical wetland lakes in the Pantanal dry season,Brazil

Abstract

Water balance studies with stable water isotopes have rarely been conducted in remote and tropical wetland areas. As such, little is known regarding the water balance and groundwater–surface water interaction in the Pantanal, one of the largest and most pristine wetlands in the world. We applied MINA TrêS, a water balance model utilizing stable water isotopes (δ¹⁸O, δ²H) and chloride (Cl^-) to assess the dry-season hydrological processes controlling groundwater–surface water interactions and the water balance of six floodplain lakes in the northern Pantanal, Brazil. Qualitatively, all lakes exhibited similarity in hydrological controls. Quantitatively, they differed significantly due to morphological differences in controlling groundwater inflow and lake volume. Our approach is readily transferable to other remote and tropical wetland systems with minimal data input requirements, which is useful in regions with sparse hydrometric monitoring.

Editor Z.W. Kundzewicz     

Coral reef ecosystems protect shore from high-energy waves under climate change scenarios

Coral reefs and other coastal ecosystems such as seagrasses and mangroves are widely recognized to provide protection against the devastating effects of strong waves associated with tsunamis and storms. The predicted warming climate brings to fore the role of these ecosystems in providing protection against stronger typhoons that can result in more devastating waves of greater amplitude. We performed a model simulation of storm generated waves on a Philippine reef, which is located along the path of tropical storms, i.e., at least 10 typhoons on the average pass through the study site yearly. A model to simulate wave propagation was developed using Simulating Waves Nearshore (SWAN) and DELFT3D-WAVE computer simulation software. Scenarios involving local monsoonal wind forcing and storm conditions were simulated. In addition, as climate change may also result to increased relative sea level, a 0.3 m and 1 m rise in sea level scenarios were also used in the wave model simulations. Results showed that the extensive reef system in the site helped dissipate wave energy that in turn reduced wave run-up on land. A significant reduction in wave energy was observed in both climate change, i.e., stronger wind and higher sea level, and non-climate change scenarios. This present study was conducted in a reef whose coral cover is in excellent condition (i.e., 50 to 80% coral cover). Estimates of coral reef growth are in the same order of magnitude as estimates of relative sea level rise based on tide gauge and satellite altimeter data, thus it is possible that the role of reefs in attenuating wave energy may be maintained if coral reef growth can keep up with the change in sea level. Nonetheless, to maintain reef growth, it is imperative to manage coral reef ecosystems sustainably and to eliminate the stressors that are within human control. Minimizing activities such as illegal and destructive blast and poison fishing methods, pollution and siltation, is crucial to minimize the impacts of high-energy waves that may increase with climate change.