Numerical flow simulation of flush type intake duct of waterjet

Waterjet propulsion system is widely used to thrust high speed marine vessels in excess of 30–35 knots by virtue of high propulsive efficiency, good maneuverability, and less vibration. Since, however, approximately 7–9% of the total power is lost in intake duct due to flow separation, nonuniformity, etc., detail understanding of flow phenomena occurring within intake duct is essential to reduce the power loss. The present work solved 3D incompressible RANS equations on multiblocked grid system of the flush type intake duct of waterjet. The numerical results of surface pressure distributions, velocity vectors, and streamlines were compared with experiments and good agreements were obtained for three jet velocity ratios. Strong suction flow through the inlet was shown and the vortex induced by the separation along the corner of the side wall was clearly shown. Flow separation on the lip was also observed. The location of stagnation point on the lip was well predicted, in accordance with PIV measurement.     

Determining the condition of groundwater in evaluating the need for corrective measures: a case for the national groundwater-monitoring network in South Korea

Groundwater data (water level, electrical conductivity (EC) and temperature) have been collected since 1995 from the national groundwater-monitoring stations in South Korea. Recently, substantial groundwater-level decline and deterioration of groundwater quality were reported at several stations. Relevant authorities undertook to investigate the groundwater hazards and to devise mitigation measures for selected monitoring stations. However, there were no criteria to determine the status of the groundwater level and EC, compared with historic data. A methodology is presented, which defines the groundwater condition. Using the suggested criteria, water level and EC data are classified into normal, watch and warning levels, leading to different administrative measures and technical investigations. The primary criterion compares the observed values for the evaluation year (e.g. 2003) and the historic values of normal years preceding the evaluation year (e.g. 1996–2002), using box plots. The secondary criterion uses variation trends of the values with the aid of parametric and non-parametric trend tests. Final decisions are dependent on scores assigned to each test. According to the criteria suggested, detailed investigations and mitigation measures for water level decline are required for seven stations and those for water quality are needed for 18 stations because they reside within the warning classification.     

Burial and degradation of Rena oil within coastal sediments of the Bay of Plenty

ABSTRACT

During the Rena oil spill, no data existed for New Zealand conditions on the likely depth of burial and the expected degradation of oil deposited on sandy beaches. Sediment cores were taken from 12 locations along the Bay of Plenty coastline c. 1 year after the Rena oil spill. No visible oil was detected in cores and trenches dug within the beaches. Chemical extraction was performed on 20?cm slices from the upper 40?cm of 26 cores, and the elutriates were analysed for the presence of polycyclic aromatic hydrocarbons (PAHs). The results were compared with known PAH fingerprints of Rena oil and its degradation products. Only seven samples contained some marker PAHs, and none had a complete Rena profile, indicating stormwater contamination. Despite extensive deposition of Rena oil on beaches, no evidence of ongoing contamination could be located, indicating that the clean-up and degradation were effective at removing the oil.     

Application of MPA to estimate probability of collapse of structures

This paper develops a modal pushover analysis‐ (MPA) based approximate procedure to quantify the collapse potential of structural systems. The computationally demanding incremental dynamic analysis (IDA) of the structural system is avoided by MPA of the structure in conjunction with empirical equations for the collapse strength ratio for the first‐mode single‐degree‐of‐freedom (SDF) system; higher modes of vibration play essentially no role in estimating the ground motion intensity required to cause collapse of the structure. Presented are collapse fragility curves for 6‐, 9‐, and 20‐story regular special moment‐resisting teel frames computed by the exact and approximate procedures, demonstrating that the MPA‐based approximate procedure requires only a small fraction (1% in one example) of the computational effort inherent in exact IDA and still achieves highly accurate results. Copyright © 2010 John Wiley & Sons, Ltd.     

A method for the simultaneous estimation of the fundamental atmospheric parameters using the photometric indices in the BVRI and JHK color systems

This is the second paper in a series reporting a new method developed to estimate the fundamental atmospheric parameters of effective temperature, surface gravity, and metallicity simultaneously. In the first paper three parameters were estimated using only photometric indices in the uvby color system. Whereas, in this paper, we use BVRI and JHK color systems. Using the model atmosphere grids, all three parameter values were estimated with respect to both [(B–V):(V–R)] and [(B–V):(R–I)], as well as [(V–K):(H–K)] and [(J–K):(H–K)] pair indices. It was confirmed that (B–V) and (V–K) indices are good temperature indicators, but all color indices for the BVRI and JHK systems are very poor indicators of metallicity and surface gravity. This new method was applied to a number of field dwarfs and giants, and the results were compared with those from the uvby color system. We found that the JHK color system can compete with the uvby system only in the estimation of temperature.     

Remediation of TCE-contaminated groundwater using zero valent iron and direct current: experimental results and electron competition model

The objectives of this study are to design an optimal electro-enhanced permeable reactive barrier (E2PRB) system for the remediation of trichloroethylene (TCE)-contaminated water using zero valent iron (ZVI) and direct current (DC) and to investigate the mechanisms responsible for TCE degradation in different ZVI-DC configurations. A series of column experiments was conducted to evaluate the effect of different arrangements of electrodes and ZVI barriers in the column on the TCE removal capacity (RC). In twelve different combinations of ZVI and/or DC application in the test columns, the rate of reductive dechlorination of TCE was improved up to six times with simultaneous application of ZVI and DC compared to that using ZVI only. The most effective arrangement of electrode and ZVI for TCE removal was the column set with ZVI and a cathode installed at the down gradient. Based on the electrokinetic study for the column systems with only DC input, single acid front movement could explain different RCs. An enhanced dechlorination rate of TCE using E2PRB systems, compared to a conventional PRB system, was observed, and is considered to be attributed to more electron sources: (1) external DC, (2) electrolysis of water, (3) oxidation of ZVI, (4) oxidation of dissolved Fe²⁺, (5) oxidation of molecular hydrogen at the cathode, and (6) oxidation of Fe²⁺ in mineral precipitates. Each of these electron sources was evaluated for their potential influencing the TCE RC through the electron competition model and energy consumption. A strong correlation between the quantity of electrons generated, RC, and the energy-effectiveness was found.     

Changes in spatial variations of sap flow in Korean pine trees due to environmental factors and their effects on estimates of stand transpiration

It is difficult to scale up measurements of the sap flux density (Js) for the characterization of tree or stand transpiration (E) due to spatial variations in JS and their temporal changes. To assess spatial variations in the sap flux density of Korean pine (Pinus koraiensis) and their effects on E estimates, we measured the Js using Granier-type sensors. Within trees, the Js decreased exponentially with the radial depth, and the Js of the east aspects were higher than those of the west aspects. Among trees, there was a positive relationship between Js and the tree diameter at breast height, and this positive relationship became stronger as the transpiration demand increased. The spatial variations that caused large errors in E estimates (i.e., up to 110.8 % when radial variation was ignored) had varied systematically with environmental factors systematic characteristics in relation to environmental factors. However, changes in these variations did not generate substantial errors in the E estimates. For our study periods, the differences in the daily E (E _D) calculated by ignoring radial, azimuthal and tree-to-tree variations and the measured E _D were fairly constant, especially when the daily vapor pressure deficit (D__D) was higher than 0.6 kPa. These results imply that the effect of spatial variations changes on sap flow can be a minor source of error compared with spatial variations (radial, azimuthal and tree-to-tree variations) when considering E estimates.     

Multiple Type II Solar Radio Bursts

We report on the detailed analysis of a set of 38 multiple type II radio bursts observed by Culgoora radio spectrograph from January 1997 to July 2003. These events were selected on the basis of the following criteria: (i) more than one type II were reported within 30 min interval, (ii) both fundamental and harmonic were identified for each of them. The X-ray flares and CMEs associated with these events are identified using GOES, Yohkoh SXT, SOHO/EIT, and SOHO/LASCO data. From the analysis of these events, the following physical characteristics are obtained: (i) In many cases, two type IIs with fundamental and harmonic were reported, and the time interval between the two type IIs is within 15 min; (ii) The mean values of starting frequency, drift rate, and shock speed of the first type II are significantly higher than those of the second type II; (iii) More than 90% of the events are associated with both X-ray flares and CMEs; (iv) Nearly 75% of the flares are stronger than M1 X-ray class and 50% of CMEs have their widths larger than 200^∘ or they are halo CMEs; (v) While most of the first type IIs started within the flare impulsive phase, 22 out of 38 second type IIs started after the flare impulsive phase. Weak correlations are found between the starting and ending frequencies of these type II events. On the other hand, there was no correlation between two shock speeds between the first and the second type II. Since most of the events are associated with both the flares and CMEs, and there are no events which are only associated with multiple impulsive flares or multiple mass ejections, we suggest that the flares and CMEs (front or flank) both be sources of multiple type IIs. Other possibilities on the origin of multiple type IIs are also discussed.     

Practical considerations for the segmented-flow analysis of nitrate and ammonium in seawater and the avoidance of matrix effects

In this study we describe measures taken in our laboratory to improve the long-term precision of nitrate and ammonia analysis in seawater using a microflow segmented-flow analyzer. To improve the nitrate reduction efficiency using a flow-through open tube cadmium reactor (OTCR), we compared alternative buffer formulations and regeneration procedures for an OTCR. We improved long-term stability for nitrate with a modified flow scheme and color reagent formulation and for ammonia by isolating samples from the ambient air and purifying the air used for bubble segmentation. We demonstrate the importance of taking into consideration the residual nutrient content of the artificial seawater used for the preparation of calibration standards. We describe how an operating procedure to eliminate errors from that source as well as from the refractive index of the matrix itself can be modified to include the minimization of dynamic refractive index effects resulting from differences between the matrix of the samples, the calibrants, and the wash solution. We compare the data for long-term measurements of certified reference material under two different conditions, using ultrapure water (UPW) and artificial seawater (ASW) for the sampler wash.