Earth Dam-foundation interaction during earthquakes

Several significant parameters that could affect interaction in a dam-foundation system are discussed. These parameters are: (1) Fundamental periods of the dam and the foundation layer. (2) Lateral extent of the dam. (3) The material properties of the dam and the foundation layer. Five cases are analysed to illustrate the influence of these parameters on interaction. An interaction ratio, R₁, relating the response of the dam-foundation system at the base of the dam to the free field response is introduced and interaction effects are expressed in terms of this ratio; the smaller this ratio, the less are the interaction effects. For very small values of R₁, it is shown that the dam-foundation system could be decoupled The results of the studies presented in the paper suggest that the interaction effects cannot be uniquely related to either the ratio of the period of the dam to the period of the foundation layer, or to the material properties of the dam and foundation layer. However, for the limited number of cases investigated, the interaction effects were found to be uniquely related to the ratio D/B, where D is the depth of the foundation layer and B is the width of the dam section. For values of D/B less than unity, strong interaction effects were obtained and the dam-foundation system could only be analysed as a coupled system. For values of D/B greater than unity, the interaction appeared negligible and the dam and its foundation layer could be decoupled. It should be noted, however, that for very small values of D/B the interaction effects would decrease becaase as D approaches zero, there would be no interaction The use of the interaction ratio, R₁, and the parameter D/B should aid in assessing the need for analysing the response of the dam-foundation as a coupled or as a decoupled system.     

Grain-size trends, basin subsidence and sediment supply in the Campanian Castlegate Sandstone and equivalent conglomerates of central Utah

Reconstructions of grain-size trends in alluvial deposits can be used to understand the dominant controls on stratal architecture in a foreland basin. Different initial values of sediment supply, tectonic subsidence and base-level rise are investigated to constrain their influence on stratal geometry using the observed grain-size trends as a proxy of the goodness of fit of the numerical results to the observed data. Detailed measurements of grain-size trends, palaeocurrent indicators, facies and thickness trends, channel geometries and palynological analyses were compiled for the middle Campanian Castlegate Sandstone of the Book Cliffs and its conglomerate units in the Gunnison and Wasatch plateaus of central Utah. They define the initial conditions for a numerical study of the interactions between large-scale foreland basin and small-scale sediment transport processes. From previous studies, the proximal foreland deposits are interpreted as recording a middle Campanian thrusting event along the Sevier orogenic belt, while the stratal architecture in the Book Cliffs region is interpreted to be controlled by eustatic fluctuation with local tectonic influence. Model results of stratal geometry, using a subsidence curve with a maximum rate of ≈45 m Myr^?1 for the northern Wasatch Plateau region predict the observed grain-size trends through the northern Book Cliffs. A subsidence curve with a maximum rate of ≈30 m Myr^?1 in the Gunnison–Wasatch Plateaus best reproduces the observed grain-size trends in the southern transect through the southern Wasatch Plateau. Eustasy is commonly cited as controlling Castlegate deposition east of the Book Cliffs region. A eustatic rise of 45 m Myr^?1 produces grain-size patterns that are similar to the observed, but a rate of eustatic rise based on Haq et al. (1988) will not produce the observed stratal architecture or grain-size trends. Tectonic subsidence alone, or a combined rate of tectonic subsidence and a Haq et al. (1988) eustatic rise, can explain the stratal and grain-size variations in the proximal and downstream regions.     

Derivation of a Tidal Inundation Model to Support Environmental Research in Roebuck Bay (Western Australia)

A method for deriving mean inundation times for a large expanse of intertidal mudflats is presented. Image processing techniques are used to extract waterlines from two Landsat Thematic Mapper scenes at approximately high and low tides, respectively. Along with data based on standard tidal predictions, the waterlines are utilised to derive an initial Digital Elevation Model (DEM) for the tidal flat within a GIS environment. As the model fails to fully cover the mean spring tidal range, a routine is developed to linearly extrapolate this surface to the elevation of the mean spring low tide. Tidal interpolation equations are then utilised to generate an inundation time in hours for each cell on this extrapolated DEM. Output from the generalised model is a series of maps showing isolines of inundation for both the mean spring and neap tidal cycles, as well as sets of point data that may be integrated with existing biological sample data. These data will be used to support an ongoing geologic and biologic investigation of the bay and its ecology.     

Lake-Sediment Records of Recent Environmental Change on Svalbard: Results of Diatom Analysis

Surface sediments from 23 lakes on Svalbard were analysed for diatoms. About 182 taxa were found but samples generally have a low richness, with the majority of sites dominated by benthic genera such as Fragilaria, Navicula, and Achnanthes. Centric Cyclotella species occur at only three sites. Modern relationships between diatom abundance and water chemistry and other environmental variables were explored numerically and a preliminary transfer function for pH was developed. Lakes fell into three groups on the basis of their diatom assemblages: (1) high pH, high cation, high conductivity sites characterised by Amphora libyca, (2) shallow sites with relatively high nutrient values characterised by Fragilaria species, and (3) more acid and dilute sites with high amounts of snow cover in the catchments characterised by small Achnanthes species and Navicula digitulus. Five sediment cores representing the recent past were also analysed for diatoms. Three shallow sites were dominated by Fragilaria species throughout the period represented by the cores and no shifts in inferred pH were found. At two deeper sites (Arresjøen, Birgervatnet) major assemblage shifts are found which are unrelated to independent evidence for atmospheric contamination. Early (ca. 1200 AD) changes found at both sites are possibly related to the onset of the ‘Little Ice Age’. Later changes are neither synchronous nor similar in nature and might be best explained as individual responses to the recovery from the ‘Little Ice Age’ and subsequent climatic warming.     

Fine grain sediment transport and deposition in the Patos Lagoon–Cassino beach sedimentary system

Extensive mud deposits superimposed on the predominantly sandy inner continental shelf adjacent to the Patos Lagoon estuary, indicates that the Lagoon is a potential source of fine sediments to the coastal sedimentary system. The lagoon is large and shallow, and the water movement is mainly controlled by wind-driven set-up and set-down. The mean river inflow is around 2000 m³ s⁻¹, although peak flow rates exceeding 20,000 m³ s⁻¹ have been observed during El Niño periods. Though the tidal elevations are small, tidal velocities in the lagoon's inlet can be significant due to the large extension of the backwaters. Moreover, significant exchange flows can be generated between the estuary and coastal area due to barotropic pressure gradients established as a function of wind and freshwater discharge. The predominant net flow is seawards, but opposite near-bed flows due to pronounced vertical salinity stratification can also be observed. The coastal area is characterized by small tidal effects, large scale ocean circulation, wind-induced residual flows and wave-driven currents, where the waves originate from swell or are locally generated.     

Geochemistry,chronology and stratigraphy of Neogene tuffs of the Central Andean region

Tuff layers are vital stratigraphic tools that allow correlations to be made between widely dispersed exposures. Despite their widespread occurrence in the central Andes, tuffs from both natural exposures and sedimentary cores extracted from the region's extensive salars (salt pans) are relatively unstudied. Here we lay the foundation for a tephrostratigraphic framework in the central Andes (14–28°S) by chemically and morphologically characterizing ash shards, and in some cases dating 36 Neogene distal tuffs. These tuffs occur in lacustrine and alluvial deposits from the southern Bolivian Altiplano and adjacent Atacama Desert. All tuffs are calc-akaline rhyolites, consistent with their setting in the Central Andean Volcanic Zone. Five of the older tuffs were ⁴⁰Ar/³⁹Ar dated and yield an age range of 6.63–0.75 Ma. Organic material associated with tuffs deposited into paleolake sediments, paleowetland deposits, or urine-encrusted rodent middens provide constraints on the age of several Late Pleistocene and Holocene tuffs.These tuffs provide key stratigraphic markers and ages for lake cycles and archeological sites on the Bolivian Altiplano and for assessing rates of surficial processes and archeology in both the Atacama and Altiplano. While modern climate, and consequently questions about geomorphic processes and climate change, differs in the hyperarid Atacama and the semi-arid Altiplano, the most extensive air-fall tuffs covered both regions, placing the Atacama and the Bolivian Altiplano in the same tephrostratigraphic province. For example, the Escara B tuff (～1.85 Ma), can be securely identified in both the Altiplano and Atacama. On the Altiplano, dates from the Escara B and E tuffs securely establish the age of the Escara Formation—representing the oldest expansive lake documented on the Bolivian Altiplano. By contrast, the presence of the Escara B tuff below ～6 m of alluvial sediment at the Blanco Encalado site in the Atacama desert yields information about sedimentation rates in this hyperarid region. Indeed, most tuffs from the Atacama Desert are older than 600,000 years, even though they occur within fluvial terraces immediately adjacent to the alluvial fans that are still active. Most of these geomorphic surfaces in the Atacama also possess well-developed saline soils that, when combined with the radiometric ages of the distal tuffs, suggest slow rates of geomorphic change and exceptional landscape stability for this area during the Quaternary.In contrast, younger tuffs are more abundant in the more recent lake records of the Altiplano. The Chita tuff was deposited at ～15,650 cal yr B.P., during the regressive phase of the region's deepest late Quaternary lake cycle—the “Tauca lake cycle”—which spanned 18.1–14.1 cal yr B.P. Two Holocene tuffs, the Sajsi tuff and the Cruzani Cocha tuff, are widespread. The Sajsi tuff was deposited just before 1700 cal yr B.P., whereas the Cruzani Cocha tuff appears to be mid-Holocene in age and shows some chemical affinities to a Holocene tuff (202B) deposited between 4420 and 5460 cal yr B.P. in a urine-encased rodent midden in the Atacama Desert.     

A hydrothermal deposit from explorer ridge in the northeast Pacific Ocean

Crusts composed of nontronite and ferromanganese oxides were recovered from Explorer Ridge, a spreading ridge segment in the northeastern Pacific Ocean located off the west coast of Canada. The chemical and mineralogical composition of the crusts closely resembles that of the mound-like hydrothermal deposits recently discovered at the FAMOUS site on the Mid-Atlantic Ridge and on the Galapagos spreading centre. Compositional anomalies suggest that the crusts are precipitates of hydrothermal vent solutions which were ejected discontinuously and subsequently mixed with seawater.     

Monitoring of toxic substances in the Hong Kong marine environment

A long-term programme for monitoring toxic substances in the marine environment was established in Hong Kong in 2004, focusing on chemicals of potential ecological and health concern. The programme ran on 3-year cycles, with the first two years monitoring marine water, sediment, biota, and the third year monitoring pollution sources. Twenty-four priority chemicals were measured, including dioxins/furans, dioxin-like PCBs, total PCBs, PAHs, DDTs, HCHs, TBTs, phenol, nonylphenol (NP), NP ethoxylates, PBDEs and metals. Results from the first three years of monitoring indicate that toxic substances in the Hong Kong marine environment were within the range reported for the coastal waters in China and other regions, but generally lower than in the Pearl River Estuary. The levels met the standards for protecting aquatic life and human consumption. Sewage effluent, stormwater and river water were possible sources of phenolic compounds; whereas air deposition or regional pollution, rather than local discharges, may contribute to the dioxins/furans, PAHs and PCBs found in the marine environment.     

Internal tides and waves near the continental shelf edge

Abstract

The subject is reviewed from the viewpoints of theory, internal tide and wave structure and their implications.

A wider theoretical context suggests scope for further investigation of natural or nearly-trapped forms above the inertial frequency.

Although internal tides in many locations are observed to have first-mode vertical structure, higher modes are seen offshore from shallow shelf-break forcing and for particular Froude numbers, and may be expected locally near generation. Bottom intensification is often observed where the sea floor matches the characteristic slope. Solitons form from internal tides of large amplitude or at large changes of depth.

Internal tides and solitons are observed also at many sills and in straits, and to intensify in canyons.

Non-linear effects of the waves, especially solitons, include the conveyance of water, nutrients, ‘‘mixing potential'’ etc. away from their source to other locations, and the generation of mean currents. The waves transfer energy and possibly heat between the ocean and shelf, may be a source of medium frequency waves on the shelf (periods of minutes) and can contribute to interior mixing and overturning, bottom stirring and sediment movement.