3rd Regional Symposium on Landslides in the Adriatic-Balkan Region (3rd ReSyLAB)—a final report

The 3rd Regional Symposium on Landslides in the Adriatic-Balkan Region (3rd ReSyLAB) was held in Ljubljana, Slovenia, from June 11 to 13, 2017, with 70 participants from nine countries (Austria, Bosnia and Hercegovina, Croatia, Czech Republic, Italy, Republic of Macedonia, Serbia, Slovenia, Spain)—scientists, engineers, researchers, students, experts, politicians, and other decision-makers working in the area of landslide risk reduction in the region. The ReSyLAB is a biannual event organized by the Adriatic-Balkan Network of the International Consortium on Landslides (ICL ABN). Being an important form of activities of this ICL regional network comprising of six ICL members from four countries, it was also a contribution of the International Consortium on Landslides (ICL) to the implementation of the Sendai Framework for Disaster Risk Reduction 2015–2030. This article reports on the main outcomes of the 3rd ReSyLAB Symposium. Altogether, 41 abstracts were published in the symposium book of abstracts, and the symposium proceedings with over 20 reviewed full papers are under preparation to be printed early in 2018. During the 3rd ReSyLAB, a five invited keynote lectures have been presented, and 28 oral presentations are given to the audience. An important part of the symposium was a Round Table entitled “Enhancing cooperation between landslide research community and end users.” On the last day of the symposium, over 30 experts participated in two post-symposium study tours in Slovenia.     

Comparison of different models of water quality index in the assessment of surface water quality

The method of water quality index is widely used in evaluation of the surface water quality because of its capability to summarize a number of water quality parameters into one numeric value, along with defined scale of water quality range. The current investigation includes application of modified model for calculating water quality index values, generated using experimental data and literary models. Software was created using modular design. Fourteen physical, chemical and biological parameters representing water quality state along with the assigned weights were elected. Comparison between models generated based on Serbian and American models of water quality index was done. Selected parameters differ mutually in number of parameters used in calculation of index, as well as in values of the weighting factors. In order to enable an efficient water quality analysis and to reconcile the requirements of both Serbian and American model, two software solutions were generated and processed on the example of the water quality of the Danube River in Serbia. Danube water quality was assessed at seventeen measuring locations along the river flow. Index values obtained from the two generated software applications were compared with the results of the official Serbian online calculator. Water quality determined using new generated models shows stricter approach and one class lower water quality compared to the existing Serbian model. Therefore, modular and open-generated simulation software is of great significance for the comparison and testing of different water quality models, not just those two shown in this study.     

Surface Geophysical Methods used to Verify the Karst Geological Structure in the Built-up Area: A Case Study of Specific Engineering-Geological Conditions

This article presents a research study of complex limestone karst engineering-geological conditions in the municipality Valaská near Banská Bystrica in Slovakia. The aim of the study is to demonstrate the impossibility of spatial identification of cave spaces using surface geophysical methods due to the specific engineering-geological conditions of a thick surface layer of anthropogenic fill containing highly heterogeneous anthropogenic material. Its maximum thickness is 3 m. Another specificific condition of the study area is its location in the built-up area, due to which the applicability of geophysical methods was limited. The article contains methodological recommendations to be used in analogous geological conditions with karst structures topped with anthropogenic fill, which complicates the identification of cave spaces. The recommended solution herein is the identification of the cave system using underground mapping of the karst and its projection onto the surface for which surface geophysical methods have been combined.     

Upwelling of Deep-seated Fluid in the Sikhote-Alin Region,Far East of the Eurasian Plate

Aquatic Geochemistry - Spring waters with high-pCO2 content are widely distributed in the Sikhote-Alin region in Russia. Mukhen spa is one such spring located in the northern Sikhote-Alin region....     

The role of water mass dynamics in controlling bacterial abundance and production in the middle Adriatic Sea

Month-to-month fluctuations in the abundance of bacteria and heterotrophic nanoflagellates (HNF) and bacterial production, as well as various chemical (nutrients, oxygen) and physical (salinity, temperature) parameters were analysed at a station located in the open middle Adriatic Sea during one decade (1997-2006). Being influenced by both coastal waters and open Adriatic circulation in the surface layer, and by the deep Adriatic water masses in the deep layers (100 m), this station is quite suitable for detecting the environmental changes occurring in the open Adriatic Sea with respect to the circulation of its water masses and their long-term changes and anomalies. Multivariate methods were used to identify seasonal and inter-annual changes of the investigated parameters, associating observed changes to the changes in Adriatic water masses and circulation regimes. The analyses showed that bacterial abundance and production were controlled by different water mass dynamics during 1997-2001 compared to 2002-2006 period, particularly noticeable in different seasonal patterns of biological parameters. The interplay between North Adriatic Dense Water (NAdDW) and Levantine Intermediate Water (LIW) resulted in a change in the available nutrients (NAdDW is poor in orthophosphates), and as a consequence different bacterial abundance and production. A few periods were examined in detail, such as 2004, when LIW inflow was particularly strong and was accompanied by an increase of bacterial and HNF abundances, as well as of bacterial production.     

Mesozooplankton spatial distribution and community structure in the South Adriatic Sea during two winters (2015, 2016)

Whereas the data on mesozooplankton in the epipelagic offshore Mediterranean Sea are extensive, less information is available about plankton in the deeper layers. The present study aims to describe the vertical and horizontal structure and distribution of mesozooplankton species and their associations down to 1,200 m in the water of the Southern Adriatic Sea. Zooplankton were sampled using a Nansen net of 200‐μm mesh size during two cruises in the winters of 2015 and 2016, extending from the coast to the open sea. In total, 203 zooplankton taxa were identified. The community was dominated by copepods, representing between 67% and 91% of the total abundance. The highest total densities were recorded in the upper layers where a high proportion (up to 36%) of appendicularians was also observed in the first sampled year. Five groups of samples were determined based on their community structure. In 2015 communities were distinct between the 0 and 50 m layer and the underlying one (50–100 m), whereas in 2016 epipelagic waters were inhabited by a more uniform mesozooplankton community. The mesopelagic and deep‐water fauna, especially copepods, showed a relatively stable composition in both sampling years Overall, our study confirms the oligotrophic character of the Southern Adriatic, with occasional density outbreaks of appendicularians under favourable conditions.     

Meridional Motion and Reynolds Stress from Debrecen Photoheliographic Data

The Debrecen Photoheliographic Data catalogue is a continuation of the Greenwich Photoheliographic Results providing daily positions of sunspots and sunspot groups. We analyse the data for sunspot groups focussing on meridional motions and transfer of angular momentum towards the solar equator. Velocities are calculated with a daily shift method including an automatic iterative process of removing the outliers. Apart from the standard differential rotation profile, we find meridional motion directed towards the zone of solar activity. The difference in measured meridional flow in comparison to Doppler measurements and some other tracer measurements is interpreted as a consequence of different flow patterns inside and outside of active regions. We also find a statistically significant dependence of meridional motion on rotation velocity residuals confirming the transfer of angular momentum towards the equator. Analysis of horizontal Reynolds stress reveals that the transfer of angular momentum is stronger with increasing latitude up to about \(40^{\circ}\), where there is a possible maximum in absolute value.     

Geomagnetic Effects of Corotating Interaction Regions

We present an analysis of the geoeffectiveness of corotating interaction regions (CIRs), employing the data recorded from 25 January to 5 May 2005 and throughout 2008. These two intervals in the declining phase of Solar Cycle 23 are characterised by a particularly low number of interplanetary coronal mass ejections (ICMEs). We study in detail how four geomagnetic-activity parameters (the Dst, Ap, and AE indices, as well as the Dst time derivative, \(\mathrm{dDst}/\mathrm{d}t\)) are related to three CIR-related solar wind parameters (flow speed, \(V\), magnetic field, \(B\), and the convective electric field based on the southward Geocentric solar magnetospheric (GSM) magnetic field component, \(\mathit{VB}_{s}\)) on a three-hour time resolution. In addition, we quantify statistical relationships between the mentioned geomagnetic indices. It is found that Dst is correlated best to \(V\), with a correlation coefficient of \(\mathrm{cc}\approx0.6\), whereas there is no correlation between \(\mathrm{dDst}/\mathrm{d}t\) and \(V\). The Ap and AE indices attain peaks about half a day before the maximum of \(V\), with correlation coefficients ranging from \(\mathrm{cc}\approx0.6\) to \(\mathrm{cc}\approx0.7\), depending on the sample used. The best correlations of Ap and AE are found with \(\mathit{VB}_{s}\) with a delay of 3 h, being characterised by \(\mathrm{cc}\gtrsim 0.6\). The Dst derivative \(\mathrm{dDst}/\mathrm{d}t\) is also correlated with \(\mathit{VB}_{s}\), but the correlation is significantly weaker \(\mathrm{cc}\approx 0.4\)?–?0.5, with a delay of 0?–?3 h, depending on the employed sample. Such low values of correlation coefficients indicate that there are other significant effects that influence the relationship between the considered parameters. The correlation of all studied geomagnetic parameters with \(B\) are characterised by considerably lower correlation coefficients, ranging from \(\mathrm{cc}=0.3\) in the case of \(\mathrm{dDst}/\mathrm{d}t\) up to \(\mathrm{cc}=0.56\) in the case of Ap. It is also shown that peak values of geomagnetic indices depend on the duration of the CIR-related structures. The Dst is closely correlated with Ap and AE (\(\mathrm{cc}=0.7\)), Dst being delayed for about 3 h. On the other hand, \(\mathrm{dDst}/\mathrm{d}t\) peaks simultaneously with Ap and AE, with correlation coefficients of 0.48 and 0.56, respectively. The highest correlation (\(\mathrm{cc}=0.81\)) is found for the relationship between Ap and AE.     

The global structural response model for multi-deck ships in concept design phase

This paper is an attempt to contribute to the improvement of an analysis model within overall structural synthesis procedure for the multi-deck ships. The paper is organized in two parts: modeling principles and model validation. Principles of the proposed generic model formulation on the global and sub-structure levels are given in detail while the load model is briefly summarized. The basic building blocks (macro-elements and gross-elements) for the modeling of ordinary stiffened panels, combining numerical and analytical approaches, are presented and discussed w.r.t. requirements for a multi-deck structure. Different surrogates (sets of elements and ordinary macro-elements) used for equivalent modeling of large side openings are evaluated, since the reduced shear stiffness of superstructure sides has large influence on the hull girder stress distributions along the entire cross section height. The generic ship models developed using outlined principles and the basic building blocks are further validated through complex examples of a large cruise ship and a livestock carrier. On the global level, the accuracy of the generic model w.r.t. the longitudinal stress distribution over ships height is compared with a standard full ship FE model. The results confirmed that the suggested structural modeling principles, based on the generic FE model can be applied for the fast investigation of different structural topological/geometrical concepts as well as for the ordinary scantling/material optimization.