The first record of dinosaurs in the Dalmatian part (Croatia) of the Adriatic-Dinaric carbonate platform (ADCP)

The first discovery of dinosaur footprints on the Dalmatian part of the Adriatic-Dinaric carbonate platform (ADCP) is reported. They constitute the geologically youngest record of footprints on the ADCP. The trackbearing layer was formed in the intertidal environment and represents the final stage of a shallowing-upward cycle. Just below it, a heavy dinoturbated limestone layer can be observed. Microfacies analysis, incorporating evidence from benthic foraminifera and algae, indicates a Late Turonian–Early Coniacian age. The overall morphology and size of the footprints points to sauropod dinosaurs; they represent the largest forms recorded so far on the ADCP. This hints at a prolonged sauropod presence on the platform and to its Late Cretaceous connection to the continent rather than isolation.     

Weathering characteristics of arctic islands in northern Norway

The arctic islands of the Lofoten-Vesterålen archipelago in northern Norway have a wide distribution of weathered land surfaces commonly located above 250 m with several apparent similarities. In order to investigate the characteristics of (deep) weathering in this region, northern Langøya and Hadseløya were chosen for in-depth analyses. Eight weathering profiles were excavated from various surfaces, and the stratigraphies were logged in detail. Material was collected throughout the weathering horizons, and all samples were subsequently analysed for clay mineralogy (< 63 μm fraction) and grain size distribution. The sampling strategy was complemented by samples from additional saprolites and other landforms such as moraines and rock glaciers. The XRD results indicate that the presence of secondary minerals, such as gibbsite (Al(OH)₃) and kaolinite (Al₂Si₂O₅(OH)₄), are very common throughout the profiles. Gibbsite is an extreme end product of silicate weathering and usually associated with a warmer and more humid climate, as found in Scandinavia during the Tertiary. The grain size analyses (< 63 μm) show that the finer silt fractions (< 8 μm) tend to be high in the profiles (20–40%), with significant amounts of clay (5–15%) demonstrating that the regolith itself is susceptible to frost sorting mechanisms.¹⁰Be exposure dates from in situ quartz knobs on tors and boulders of local origin suggest > 40,000 years of subaerial conditions. Considering the steady surface erosion, this figure should be viewed as an absolute minimum age estimate. Mapping of the superficial sediments and geomorphological features of the study areas has revealed several common morphological features, which indicate dominance of glacial and periglacial processes in the areas lying below the lower boundary of blockfields (c. 250 m). The weathering mantles are not a periglacial end product, but rather a relict tertiary landform that were modulated by permafrost processes as well as biological processes at later stages. The regolith cover constrain the vertical extension of warm-based Quaternary ice sheets challenging the notion of a parabolic ice mass consuming every mountain top of Lofoten and Vesterålen.     

The eastern Tonale fault zone: a ‘natural laboratory’ for crystal plastic deformation of quartz over a temperature range from 250 to 700 °C

Near the eastern end of the Tonale fault zone, a segment of the Periadriatic fault system in the Italian Alps, the Adamello intrusion produced a syn-kinematic contact aureole. A temperature gradient from 250 to 700 °C was determined across the Tonale fault zone using critical syn-kinematic mineral assemblages from the metasedimentary host rocks surrounding deformed quartz veins. Deformed quartz veins sampled along this temperature gradient display a transition from cataclasites to mylonites (frictional–viscous transition) at 280±30 °C. Within the mylonites, zones characterized by different dynamic recrystallization mechanisms were defined: Bulging recrystallization (BLG) was dominant between 280 and 400 °C, subgrain rotation recrystallization (SGR) in the 400–500 °C interval, and the transition to dominant grain boundary migration recrystallization (GBM) occurred at 500 °C. The microstructures associated with the three recrystallization mechanisms and the transitions between them can be correlated with experimentally derived dislocation creep regimes. Bulk texture X-ray goniometry and computer-automated analysis of preferred [c]-axis orientations of porphyroclasts and recrystallized grains are used to quantify textural differences that correspond to the observed microstructural changes. Within the BLG- and SGR zones, porphyroclasts show predominantly single [c]-axis maxima. At the transition from the SGR- to the GBM zone, the texture of recrystallized grains indicates a change from [c]-axis girdles, diagnostic of multiple slip systems, to a single maximum in Y. Within the GBM zone, above 630±30 °C, the textures also include submaxima, which are indicative of combined basal a- and prism [c] slip.     

A model of oscillatory zoning in solid solutions grown from aqueous solutions: Applications to the (Ba,Sr)SO4 system

Barite-celestite crystals can be synthesized from aqueous solutions during counter-diffusion in a gel column connecting two reservoirs. It is known that such crystals may exhibit oscillatory zoning, whereby the barium composition in the crystal fluctuates more or less regularly from the core of the crystal to its rim. We present here a simple model of oscillatory zoning in such binary solid solutions A₁A₂ grown from aqueous solutions. The model combines diffusive transport of the relevant ions with an autocatalytic growth process. The latter is formulated as a continuous growth in which the probability of finding a kink site on the growing surface depends on the chemical composition of that surface. Thus, an A₁-rich surface favors the growth of A₁ over A₂, as long as A₁ is present in the vicinity of the surface. Precipitation results in a local depletion of A₁ in the aqueous solution, and the system may switch to a A₂ growth mode, until diffusion replenishes the amount of A₁, and so on. We use a dynamical equation for the molar fraction of component A₁ in the crystal, which results from mass conservation across the rough crystal-solution interface. Linear stability analysis and direct numerical solutions show that the system exhibits oscillatory behavior. Using the barite-celestite system as a framework, the scaling is consistent with the experimental observations. We discuss the variety of zoning patterns and textures numerically obtained as the concentrations of reactants in the reservoirs vary. This model might help in understanding the formation of oscillatory zoning in hydrothermal environments.     

基于DEM的分布式水文模型构建方法

基于 DEM的分布式水文模型是现代水文学同高科技 (如计算机技术、 3S技术等 )相结合的产物 ,是研究变化环境下水文循环与水资源演化规律的理想工具 ,代表了水文模型的最新发展方向。从 DEM的特性出发 ,本文探讨并总结了分布式水文模型的特点、建模思路和模型基本结构框图。在流域离散化方面 ,重点介绍了分布式水文模型常用的三种单元划分方法 ;最后 ,针对分布式水文模型构建问题 ,从“输入模块”、“单元水文模型”、“河网汇流模型”三方面 ,阐述了分布式水文模型微结构构建方法。     

矿物热重差分析的应用

根据矿物差热曲线特征温度，拟定使用热重差分析岩矿中全碳、结晶水、硫化物硫和二氧化碳等项目的灼烧温度范围，并进行热重差分析。所得的结果与其他方法结果一致。     

WebGIS应用服务器数据调度优化策略研究

应用服务器的数据调度是影响WebGIS系统性能的主要因素之一。本文在分析WebGIS体系结构的基础上,探讨了可以在服务器端数据调度中应用的若干优化技术,包括对象化包装、连接池、线程池、扩展SQL、多步传输协议和代理服务机制。经在实验中验证,采用这些技术的WebGIS系统在同等网络环境下,可以显著提高整体性能。     

A bilinear approximation of the surface relief in terrain correction computations

A new method is presented for the computation of the gravitational attraction of topographic masses when their height information is given on a regular grid. It is shown that the representation of the terrain relief by means of a bilinear surface not only offers a serious alternative to the polyhedra modeling, but also approaches even more smoothly the continuous reality. Inserting a bilinear approximation into the known scheme of deriving closed analytical expressions for the potential and its first-order derivatives for an arbitrarily shaped polyhedron leads to a one-dimensional integration with – apparently – no analytical solution. However, due to the high degree of smoothness of the integrand function, the numerical computation of this integral is very efficient. Numerical tests using synthetic data and a densely sampled digital terrain model in the Bavarian Alps prove that the new method is comparable to or even faster than a terrain modeling using polyhedra.     

Croatia — a coastal and maritime country

Croatia, through its geographic position, is a Mediterranean/Adriatic and Central European/Danube state. As an Adriatic coastal state, it has a long maritime tradition, which is apparent in its well-developed shipping (2.4 million GT), the high-quality ship-building industry (among the top six in the world) and through its numerous sea ports, of which many were established in ancient times. The leading national port is Rijeka, which is at the same time an important transit port for Austria, Hungary, Slovakia and the Czech Republic.The exceptionally indented Croatian Adriatic coast with its attractive archipelagos and favorable climatic and oceanographic conditions in the coastal sea offers very advantageous conditions for comprehensive tourist utilization. This is particularly true of nautical tourism, which is complimented by a larger number of constructed and well-equipped yachting ports/marinas on the coast and islands.