Changes in Nutrient Biogeochemistry in Response to the Regression of Zostera noltii Meadows in the Arcachon Bay (France)

From 1989 to 2007, a severe decline in Zostera noltii meadows was reported in the Arcachon Bay, with an accelerated regression after 2005. We investigated the inter-annual variability of the biogeochemistry of the sediment in an area affected by seagrass decline. In late summer and in winter of the years 2006, 2010, and 2011, sediment cores were collected at low tide on vegetated and adjacent non-vegetated sediments located in the eastern part of the Arcachon Bay. The geochemical analyses of sediment solid-phase organic carbon, reactive P and Fe, and the pore water concentrations of Fe²⁺, DIP, and NH₄ ⁺ are presented. The changes in the chemistry of sediment and pore water between 2006 and 2010 are interpreted as a consequence of the decrease in the Z. noltii biomass between 2006 and 2010. The absence of significant seasonal variations in biomass throughout the growth period (March–September) in 2011 is most likely related to the regression of Z. noltii meadow that strongly affects the study area. In contrast to the healthy meadow in 2006, the declining meadow favored the dissolution of sedimentary particulate phosphorus in winter. In late summer, the low biomass of seagrass resulted in a net release of ammonium in the pore water of the upper 20 cm of sediment. This study clearly shows that seagrass decay may enhance nutrient release in sediments, resulting in a significant supply of phosphorus to the water column of a magnitude comparable to annual inputs to the lagoon from the rivers and the tidal pump.     

Geogene Versus Anthropogene Origin of Trace Metals in Sediments in Cua Luc Estuary and Ha Long Bay, Vietnam

In the present study, the geochemistry of 49 surficial-bed and 101 core sediment samples is investigated to clarify the origin of trace metals in the Cua Luc Estuary and Ha Long Bay, which is a famous World Natural Heritage Site in Vietnam. Moreover, the potential mobility of trace metals is also assessed and their relationship with reference elements (Al, Fe, and Ca) and organic matter is established in order to make recommendations for sediment management and monitor future pollution. Generally, trace metals display higher concentrations in Ha Long Bay compared to the Cua Luc Estuary. However, this is controlled by the distribution of the fine (clay?+?silt) fraction, and hence the concentrations of Al, Fe, Ca, and organic matter (OM). The comparison of concentrations of trace metals (normalized towards Al) between the surficial sediments and the subsurface core sediments based on ¹³⁷Cs datings indicates that almost all surficial-sediment data fall inside or deviate slightly from the 95 % prediction interval of a background regression line. In addition, as determined by a Community Bureau of Reference three-step extraction, trace metals mainly dominate in the residual fraction (assumed to relate to crystal lattice of primary and secondary minerals), and this fraction does not change much in recent sediment layers. Therefore, trace metals are supposed to be derived from natural bio/geochemical processes and are characterized by a low potential mobility. Consequently, the established linear regression relationships of trace metal vs. Al or multiple regression relationships of trace metal vs. multi-elements (Al, Fe, Ca, and OM) are useful for the prediction of background levels of trace metals in sediments in future pollution monitoring and assessment programs.     

Comparison Between Stress and Strain Quantities of the Failure–Deformation Process of Fennoscandian Hard Rocks Using Geological Information

The aim of this paper was to compare the stress and strain quantities that are related to the failure–deformation process of hard rock. The data used here was obtained from laboratory uniaxial compression tests performed on different types of Fennoscandian hard rocks. The failure–deformation process quantities were compared at each deformation stage and for each single specimen. Moreover, geological information such as the rock origin process and the rock characteristics of the specimens were studied and linked to the stress and strain quantities. The purpose was to investigate the influence of the rock origin process and rock characteristics on these quantities. The main results of this study showed that the normalized crack damage lateral strain (ε _3cd/ε _3p ) and the volumetric strain (ε _crv?ci and ε _v?cd) quantities were strongly affected by the grain size. The normalized and volumetric quantities are weakly dependent on the mineral composition.     

An exotic Cretaceous kimberlite linked to metasomatized lithospheric mantle beneath the southwestern margin of the Francisco Craton,Brazil

We present major and trace element compositions of mineral concentrates comprising garnet xenocrysts,ilmenite,phlogopite,spinel,zircon,and uncommon minerals (ti...     

Assimilation of carbonate country rock by the parent magma of the Panzhihua Fe-Ti-V deposit（SW China）：Evidence from stable isotopes

The Panzhihua intrusion in southwest China is part of the Emeishan Large Igneous Province and host of a large Fe-Ti-V ore deposit.During emplacement of the main intrusion,multiple generations of mafic dykes invaded carbonate wall rocks,producing a large contact aureole.We measured the oxygen-isotope composition of the intrusions,their constituent minerals,and samples of the country rock.Magnetite and plagioclase from Panzhihua intrusion haveδ¹⁸O values that are consistent with magmatic equilibrium, and formed from magmas withδ¹⁸O values that were 1-2‰higher than expected in a mantle-derived magma.The unmetamorphosed country rock has highδ¹⁸O values,ranging from 13.2‰（sandstone） to 24.6-28.6‰（dolomite）.The skarns and marbles from the aureole have lowerδ¹⁸O andδ¹³C values than their protolith suggesting interaction with fluids that were in exchange equilibrium with the adjacent mafic magmas and especially the numerous mafic dykes that intruded the aureole.This would explain the alteration ofδ¹⁸O of the dykes which have significantly higher values than expected for a mantle-derived magma.Depending on the exactδ¹⁸O values assumed for the magma and contaminant, the amount of assimilation required to produce the elevatedδ¹⁸O value of the Panzhihua intrusion was between 8 and 13.7 wt.%,assuming simple mixing.The exact mechanism of contamination is unclear but may involve a combination of assimilation of bulk country rock,mixing with a melt of the country rock and exchange with CO₂-rich fluid derived from decarbonation of the marls and dolomites.These mechanisms,particularly the latter,were probably involved in the formation of the Fe-Ti-V ores.     

Hydrographic data modeling methods for determining precise seafloor topography

Acoustic and light detection and ranging are the recent methods used in hydrographical surveying. Depth values depending on X and Y horizontal coordinates are measured in both methods. While processing the hydrographical data, all data with different density are interpolated and modeled for determining the seafloor model using different interpolation techniques. In this study, effects of different surface modeling methods are investigated. Data obtained from single-beam echo sounder (SBES) are modeled using inverse distance, kriging, local polynomial, minimum curvature, moving average, nearest-neighbor, and Delaunay interpolation methods. Interpolation results are compared with the multibeam echo sounder data which were collected on the same area for determining the accuracy of modeling methods. Depending on the maximum total vertical uncertainty values in hydrographic survey standards, the best results were determined by using the kriging method. The Delaunay, minimum curvature, and inverse distance methods can be used for modeling the SBES data in shallow waters.     

‘Filament’ marker beds in the Karababa-A Member (Turonian) of the Arabian platform,SE Turkey: Palaeo-environmental significance,stratigraphy and correlation potential

A ‘filament’ event bed/level corresponds to the occurrence of thin elongate calcitic, shells, or plates of pelagic, bivalve or crinoidal, origin, within pelagic, laminated and organic-matter rich limestones. These organic-rich limestones had been generally deposited under hypoxic/anoxic conditions in an outer-ramp environment. These thin elongate, bivalve shells, or crinoidal plates, are found broken in small pieces, disintegrated, or simply preserved parallel to bedding as almost complete specimens. Such ‘filament’ beds were spotted in SE Turkey in deposits, namely the Karababa-A Member, around the Cenomanian-Turonian boundary (C/TB) and above. On a global scale, these filament event beds illustrate sea-level rise related to eustacy and/or climatic change. The abundance of filaments close to the C/TB is a biological marker of high organic productivity resulting from a climatic change to warmer conditions. The prevailing higher sea-level conditions were then favourable to the accumulation and preservation of organic-rich facies, characteristic of the Oceanic Anoxic Event 2 (OAE2). Using both biostratigraphic and carbon isotopic data, those deposits were dated from the latest Cenomanian-Turonian age. ‘Filament’ event beds were recorded in the same order, except for some small differences. A good number of these bio-events are global. Consequently, on a global scale, they are susceptible to constrain the C/TB, especially the base of the Turonian stage, with a significant degree of confidence.     

Predicting seiche hazard for coastal harbours along the northern and western coasts of France

Natural Hazards - Long-period waves propagating inside harbours can lead to the generation of seiche that can affect and significantly disrupt port operations. This study is based on the analysis...     

Geometry and kinematics of brittle deformation in the Central Cameroon Shear Zone (Kékem area): Implication for gold exploration within the Central Africa Fold Belt in Cameroon

The Central Africa Fold Belt (CAFB) is a collision belt endowed with gold deposits in Eastern Cameroon area mined for about 50 years. However, favorable areas for gold exploration are poorly known. This paper presents (1) the kinematics of the brittle deformation in the Kékem area in the SW portion of the Central Cameroon Shear Zone and (2) constraints gold mineralization events with respect to the collisional evolution of the CAFB. The authors interpret that the conjugate ENE to E and NNW to NW trending lineament corresponds to the synthetic (R) and the antithetic (R’) shears, which accompanied the dextral slip along the NE to ENE striking shear. The latter coincides with the last 570–552 Ma D₃ dextral simple shear-dominated transpression, which is parallel to the Bétaré Oya shear zone hosting gold deposits. Gold mineralizations, which mainly occurred during the last dextral shearing, are disseminated within quartz veins associated to Riedel’s previous structures reactivated due to late collisional activities of the CAFB as brittle deformation. Gold mineralizations occurred mainly during the 570–552 Ma D₃ event. The reactivation, which might be due to dextral simple shear during mylonitzation, plausibly remobilized the early gold deposits hosted in syn-compressional rocks and/or possibly focused deep-sourced fluid mixed with those released by dehydration. Therefore, the Central Cameroon Shear Zone where Kékem is located, and which shows similar petrographical and structural features to those controling Batouri gold district, is a target area for gold exploration in Cameroon.