Mixing efficiency from microstructure measurements in the Sicily Channel

Ocean Dynamics - The dissipation flux coefficient, a measure of the mixing efficiency of a turbulent flow, was computed from microstructure measurements collected with a vertical microstructure...     

Geochemistry of subsurface Late Quaternary ironstones in Rajshahi and Bogra Districts,Bangladesh: implications for genetic and depositional conditions

The present study deals with the geochemistry of Late Quaternary ironstones in the subsurface in Rajshahi and Bogra districts, Bangladesh with the lithological study of the boreholes sediments. Major lithofacies of the studied boreholes are clay, silty clay, sandy clay, fine to coarse grained sand, gravels and sands with(fragmentary) ironstones. The ironstones contain major oxides, Fe_2 O_3*(*total Fe)(avg. 66.6 wt%), SiO_2(avg. 15.3 wt%), Al_2 O_3(avg. 4.0 wt%), MnO(avg. 7.7 wt%), and CaO(avg. 3.4 wt%). These geochemical data imply that the higher percentage of Fe_2 O_3* along with Al_2 O_3 and MnO indicate the ironstone as goethite and siderite, which is also validated by XRD data. A comparatively higher percentage of SiO_2 indicates the presence of relative amounts of clastic quartz and manganese-rich silicate or clay in these rocks. These ironstones also have significant amounts of MnO(avg. 7.7 wt%) suggesting their depositional environments under oxygenated condition. Chemical data of these ironstones suggest that the source rock suffered deep chemical weathering and iron was mostly carried in association with the clay fraction and organic matter. Iron concretion was mostly formed by bacterial build up in swamps and marshes, and was subsequently embedded in clayey mud.Within the coastal environments, the water table fluctuates and goethite and siderite with mud and quartz became dry and compacted to form ironstone.     

Population growth and food supply margin in Pakistan

Conclusion Population growth in Pakistan is alarming. The long and continuing shortage of foodgrains at intervals and increasing competition for land use have resulted in deterioration in yield per hectare, and low reproduction of livestock, although hard struggle is going on for self sufficiency. The margin in food supply has arrived even in those areas where the production has been abundant, and vulnerable to crop failure and other emergency causes. Provision against these dangers call for the maintenance of adequate national reserves, which can be brought into action at an early stage of the emergency.The area under agriculture can be increased through improved programmes of soil conservation and development of barani (rain fed areas) with cost-benefit consideration. Several million hectares of barani areas have fertile soils and are suitable for agricultural development. It has been estimated that 45 billion m³ of river water flows into the Arabian Sea. A part of the water sources is properly harnessed and could possibly change the economic conditions of the barani region. A number of regions are covered by hard texture of the soil, mechanization will have to be introduced in these areas to increase production much beyond the level of margin. Soil conservation measures have already been initiated and in some cases demonstrated to farmers, but the reclaimed virgin lands up to 1973 were very little, just 46.5 ha of virgin lands and 72 ha of cultivated area from the Soan and Potwar uplands. It is expected that 300,000 ha of cultivated area, 10,000 ha of gullied land will be reclaimed through soil conservation methods in the current Fifth Year Plan.Pakistan has great water potential. The remedy lies in wise judicious and scientific water management. Inadequate natural and artificial drainage systems are causing water-logging and salinity. An accelerated programme for recovering lost land is already in operation. Many land reforms were introduced from time to time, but the production result is not of great significance. Restrictions were imposed on consolidated holdings. The economic level of such holding above subsistence have not yet been taken into consideration. It is, therefore, necessary, to make a thorough analysis of agricultural problems, particularly with the foodgrain crops, with reference to population growth, the efforts should continue till the food supply occupies the supreme position by increasing production and reducing the rate of population growth by adopting socio-economic methods.     

Pattern in the distribution of Acacia tortilis (Forsk.) Hayne

The distribution pattern of the Acacia tortilis in several sites in Qatar was investigated using the Greig-Smith-Kershaw method of pattern analysis. Neither random nor regular dispersion were detected and the distribution of the species was of the contagious type in almost every site. Pattern analyses showed two consistent scales: a smaller scale pattern attributed to an intrinsic factor of restricted dispersal of seeds and a larger scale pattern related to past and present biotic interference.     

Boundary-layer development on circular cylinders

Mean-velocity measurements were made in the boundary layer on a smooth circular cylinder fitted with trip wires to model supercritical flow. The data are compared with the predictions of a boundary-layer calculation method to study the relative influence of surface curvature and low-Reynolds-number effects, and to assess the accuracy with which the location of separation can be determined. It is shown that the effects of surface curvature are most important close to separation while those of low Reynolds numbers are significant everywhere except near separation.     

Evaluation of burial history, thermal maturity and source-rock assessment of the Upper Paleozoic succession of the eastern Taurus region, southern Turkey

The regional burial history pattern, thermal maturity variations and source rock assessment of the sedimentary succession in the eastern Taurus region, in the southern part of Turkey, have been studied on surface samples collected from the six different sections which represent the entire region. Organic petrography (Thermal Alteration Index) and geochemical data (TOC content, T_max and HI values) were obtained from transmitted-light microscopy and Rock-Eval pyrolysis.The Lower Paleozoic (Cambrian, Ordovician and Silurian) strata were not investigated and modeled in terms of the maturity and hydrocarbon source rock potential, because of their poor organic matter content and their over maturity resulting from great burial depth (more than 7630 m). Other Paleozoic strata, except the Lower Devonian Ayitepesi Formation, generally have the values of more than 0.5% TOC. Organic matter of the Middle Devonian Safaktepesi sediments are composed of highly terrestrial organic material (type III kerogen), while samples from other three formations (Gumusali, Ziyarettepe and Yigilitepe Formations), while samples from other organic matter (type II and type III kerogen). The average TAI values are as high as 3.4 (equivalent to 1.42 of R₀%) for Ayitepesi and as low as 2.75 (equivalent to 0.77 of R₀%) for Yigilitepe Formations. Time-temperature index values (TTI) indicate that Ziyarettepe and Yigilitepe sediments are marginally mature to mature, while the Devonian strata are overmature. There are minor discrepancies between ΣTTI values and geochemical data in terms of the organic maturity for Devonian strata. In contrast, the e is a consistency between those values for the Ziyarettepe and the Yigilitepe Formations. The onset of oil generation time in the region was initiated from as early as the Norian (216 Ma) to as late as the Lutetian (45 Ma).Regional variations in the level of thermal and source-rock maturities of the Upper Paleozoic sediments in the eastern Taurus region largely depend on burial depth.     

COMPARISON OF HEAVY METAL CONCENTRATIONS IN SURFACE SEDIMENT OF TANJUNG PIAI WETLAND WITH OTHER SITES RECEIVING ANTHROPOGENIC INPUTS ALONG THE SOUTHWESTERN COAST OF PENINSULAR MALAYSIA

1 INTRODUCTIONOur sampling trip to Tanjung Piai wetland in2002 showed that the site had not been developed andrecognized yet as a wetland of international importance(Ramsar). Recently, our field trip in January 2005to the same site to collect sediment sam…     

A Case Study on the Effects of Heterogeneous Soil Moisture on Mesoscale Boundary-Layer Structure in the Southern Great Plains, U.S.A. Part I: Simple Prognostic Model

The atmospheric boundary-layer (ABL) depth was observed by airborne lidar and balloon soundings during the Southern Great Plains 1997 field study (SGP97). This paper is Part I of a two-part case study examining the relationship of surface heterogeneity to observed ABL structure. Part I focuses on observations. During two days (12–13 July 1997) following rain, midday convective ABL depth varied by as much as 1.5 km across 400 km, even with moderate winds. Variability in ABL depth was driven primarily by the spatial variation in surface buoyancy flux as measured from short towers and aircraft within the SGP97 domain. Strong correlation was found between time-integrated buoyancy flux and airborne remotely sensed surface soil moisture for the two case-study days, but only a weak correlation was found between surface energy fluxes and vegetation greenness as measured by satellite. A simple prognostic one-dimensional ABL model was applied to test to what extent the soil moisture spatial heterogeneity explained the variation in north–south ABL depth across the SGP97 domain. The model was able to better predict mean ABL depth and variations on horizontal scales of approximately 100 km using observed soil moisture instead of constant soil moisture. Subsidence, advection, convergence/divergence and spatial variability of temperature inversion strength also contributed to ABL depth variations. In Part II, assimilation of high-resolution soil moisture into a three-dimensional mesoscale model (MM5) is discussed and shown to improve predictions of ABL structure. These results have implications for ABL models and the influence of soil moisture on mesoscale meteorology     

Fracture Length Estimation from Borehole Image Logs

We describe a method to estimate fracture length for circular fractures from borehole image logs. The relative frequency of fractures, which have complete circumference trace on image logs is related to fracture length. A simple functional relationship can be derived for the relative frequency of complete fracture traces in terms of average fracture inclination to borehole, borehole diameter and fracture length. This formulation however, tends to underestimate fracture length because a constant length is assumed. A more accurate length estimate can be obtained by assuming that fracture length is linearly correlated to fracture aperture or spacing. Cumulative frequency distribution of fracture aperture and spacing can be obtained from borehole image logs. The problem then transforms itself to finding the scaling factor between fracture length and aperture (or spacing) from the relative frequency of fractures with complete traces. The product of the scaling factor and average fracture spacing (or aperture) gives the average fracture length.