Fishing for diatoms: fish gut analysis reveals water quality changes over a 75-year period

Defining the reference state of some perturbed streams and rivers is challenging since their non-altered state is undocumented. Despite the near-absence of pristine sites in highly anthropogenic areas, information about aquatic communities that existed prior to human disturbance can be obtained from historic sources. Sediment coring is commonly used in paleolimnology to estimate past environmental conditions of lakes, but this technique is often not appropriate for studies of lotic systems. An alternative is to use diatom assemblages present in the guts of fish that were captured in the streams prior to significant human disturbance. The purpose of the present study was to evaluate the biological integrity of several streams in Ontario and Québec during the early twentieth century based on “paleo” diatom assemblages extracted from the guts of fish stored in museums. The Eastern Canadian diatom index (IDEC: Indice Diatomées de l’Est du Canada) was used to evaluate the biological status of “paleo” and “modern” diatom assemblages. The IDEC shows the position of diatom assemblages on a general pollution gradient. The comparison of IDEC values calculated for the 1925–1948 and the 2003–2007 periods showed that several streams were severely polluted in the early 1900s. In general, present water quality has declined compared to the early 1900s. The biological integrity of only three of the 22 sites has increased. IDEC values were not influenced by the species of fish studied.     

Comment on “Is there a paleolimnological explanation for ‘walking on water’ in the Sea of Galilee?”

In a recent paper, Nof et al. (J Paleolimnol 35:417–439, 2006) suggest a physical mechanism which could account for the formation of ice on Lake Kinneret (Sea of Galilee) in northern Israel. Based on the sea surface temperature record of sediment cores from the Mediterranean Sea the authors argue that centennial-scale cold events had the potential to trigger local ‘springs ice’ formation on the lake in the past. Here, we demonstrate that a closer inspection of the paleoceanographic record in combination with correlation and regression analyses of meteorological data provides no evidence for such cold events in the lake region during the last 10,000 years. Thus, the formation of ‘springs ice’ on Lake Kinneret was unlikely at least since the beginning of the Neolithic.     

Effect of removing small (<150?μm) chironomids on inferring temperature in cold lakes

Sieving samples for chironomid analysis with a 150 μm mesh was shown to greatly reduce sample preparation time, and use of only larger specimens did not affect chironomid-inferred salinities in African lakes. Here, we tested if this method is suitable for temperature reconstruction in colder lakes at higher latitudes. Removal of specimens <150 μm in two training sets, one from Canada and one from Sweden, had little impact on the performance statistics of the calibration models. Chironomid abundance, however, decreased greatly because more than half of the head capsules in assemblages were <150 μm. This had major impacts on the temperature reconstructions. Inferences were on average 2°C warmer with the modified models (all specimens >150 μm) than those obtained with the full model (all specimens >100 μm). General patterns of temperature change were also altered. For Lake 7 on Southampton Island, Canada, a cooling trend was reconstructed with the full Canadian model while the modified Canadian model yielded a warming trend. When only specimens >150 μm were used, two to three times more wet sediment was needed to obtain a sufficient number of head capsules. These results indicate that, in cold lakes (mean July/August air temperature ≤11°C), large proportions of head capsules are <150 μm, and sieving the samples in a 150 μm mesh leads to altered temperature reconstructions.     

Improving modelling and inversion in refraction seismics with a first-order Eikonal solver

A first-order Eikonal solver is applied to modelling and inversion in refraction seismics. The method calculates the traveltime of the fastest wave at any point of a regular grid, including head waves as used in refraction. The efficiency, robustness and flexibility of the method give a very powerful modelling tool to find both traveltimes and raypaths. Comparisons with finite-difference data show the validity of the results. Any arbitrarily complex model can be studied, including the exact topography of the surface, thus avoiding static corrections. Later arrivals are also obtained by applying high-slowness masks over the high-velocity zones. Such an efficient modelling tool may be used interactively to invert for the model, but a better method is to apply the refractor-imaging principle of Hagedoorn to obtain the refractors from the picked traveltime curves. The application of this principle has already been tried successfully by previous authors, but they used a less well-adapted Eikonal solver. Some of their traveltimes were not correct in the presence of strong velocity variations, and the refractor-imaging principle was restricted to receiver lines along a plane surface. With the first-order Eikonal solver chosen, any topography of the receiving surface can be considered and there is no restriction on the velocity contrast. Based on synthetic examples, the Hagedoorn principle appears to be robust even in the case of first arrivals associated with waves diving under the refractor. The velocities below the refractor can also be easily estimated, parallel to the imaging process. In this way, the model can be built up successively layer by layer, the refractor-imaging and velocity-mapping processes being performed for each identified refractor at a time. The inverted model could then be used in tomographic inversions because the calculated traveltimes are very close to the observed traveltimes and the raypaths are available.     

Instability structures, synsedimentary faults and turbidites, witnesses of a Liassic seismotectonic activity in the Dauphiné Zone (French Alps): A case example in the Lower Pliensbachian at Saint-Michel-en-Beaumont

Instability structures, synsedimentary faults and turbidites have been studied in the Lower Pliensbachian succession of Saint-Michel-en-Beaumont, belonging to the Taillefer block, an ancient half-graben emplaced during the Liassic Tethyan rifting. Geometrical and mechanical analyses demonstrate that the instability structures occurred thanks to movements along spineless synsedimentary normal faults, when the turbiditic and limestone layers were already case-hardened and partly fractured by tension gashes even when the mudstones were still unlithified. Both the tension gashes and the synsedimentary faults are homogeneous in strike with the major regional faults and are in good agreement with the regional direction of extension for this period. The characters of the turbiditic beds, with erosive base, graded bedding, and incomplete Bouma sequence, are in favour of a seismic origin. Instability structures, spineless synsedimentary faults and turbiditic inflows are thus considered as seismites and interpreted as the result of high seismicity periods including some events with M > 5 in the general extensive ambiance of the Liassic Tethyan rifting. The analysis of the geometrical relationships between all these sedimentary features allows to distinguish the successive stage of occurrence of an instability structure, from the sedimentation of alternating marls and limestones, and sudden turbiditic inflows, then early case-hardening of the turbidites, until the important seismotectonic event generating the spineless normal faults, themselves triggering the fall of indurated blocks and locally the forming of breccias. The Ornon Fault, which constitutes the border of the Taillefer block, 15 km eastward, played a major role during the Liassic sedimentation and may represent the major seismic fault related to the seismites occurrence in the Beaumont basin.     

Fracture analysis in the south-western Corinth rift (Greece) and implications on fault hydraulic behavior

This paper reviews the data concerning the fracture network and the hydraulic characteristics of faults in an active zone of the Gulf of Corinth. Pressure gap measured through fault planes shows that in this area the active normal faults (Aigion, Helike) act, at least temporarily and locally, as transversal seal. The analysis of the carbonate cements in the fractures on both the hangingwall and the footwall of the faults also suggests that they have acted as local seals during the whole fault zone evolution. However, the pressure and the characteristics of the water samples measured in the wells indicate that meteoric water circulates from the highest part of the relief to the coast, which means it goes through the fault zones. Field quantitative analysis and core studies from the AIG-10 well have been performed to define both regional and fault-related fracture networks. Then laboratory thin section observations have been done to recognize the different fault rocks characterizing the fault zone components. These two kinds of approach give information on the permeability characteristics of the fault zone. To synthesize the data, a schematic conceptual 3D fluid flow modeling has been performed taking into account fault zone permeability architecture, sedimentation, fluid flow, fault vertical offset and meteoric water influx, as well as compaction water flow. This modeling allows us to fit all the data with a model where the fault segments act as a seal whereas the relays between these segments allow for the regional flow from the Peloponnese topographic highs to the coast.     

Petrology,geochemistry and U–Pb geochronology of magmatic rocks from the high-sulfidation epithermal Au–Cu Chelopech deposit,Srednogorie zone,Bulgaria

The Chelopech deposit is one of the largest European gold deposits and is located 60 km east of Sofia, within the northern part of the Panagyurishte mineral district. It lies within the Banat–Srednegorie metallogenic belt, which extends from Romania through Serbia to Bulgaria. The magmatic rocks define a typical calc-alkaline suite. The magmatic rocks surrounding the Chelopech deposit have been affected by propylitic, quartz–sericite, and advanced argillic alteration, but the igneous textures have been preserved. Alteration processes have resulted in leaching of Na₂O, CaO, P₂O₅, and Sr and enrichment in K₂O and Rb. Trace element variation diagrams are typical of subduction-related volcanism, with negative anomalies in high field strength elements (HFSE) and light element, lithophile elements. HFSE and rare earth elements were relatively immobile during the hydrothermal alteration related to ore formation. Based on immobile element classification diagrams, the magmatic rocks are andesitic to dacitic in compositions. Single zircon grains, from three different magmatic rocks spanning the time of the Chelopech magmatism, were dated by high-precision U–Pb geochronology. Zircons of an altered andesitic body, which has been thrust over the deposit, yield a concordant ²⁰⁶Pb/²³⁸U age of 92.21 ± 0.21 Ma. This age is interpreted as the crystallization age and the maximum age for magmatism at Chelopech. Zircon analyses of a dacitic dome-like body, which crops out to the north of the Chelopech deposit, give a mean ²⁰⁶Pb/²³⁸U age of 91.95 ± 0.28 Ma. Zircons of the andesitic hypabyssal body hosting the high-sulfidation mineralization and overprinted by hydrothermal alteration give a concordant ²⁰⁶Pb/²³⁸U age of 91.45 ± 0.15 Ma. This age is interpreted as the intrusion age of the andesite and as the maximum age of the Chelopech epithermal high-sulfidation deposit. ¹⁷⁶Hf/¹⁷⁷Hf isotope ratios of zircons from the Chelopech magmatic rocks, together with published data on the Chelopech area and the about 92-Ma-old Elatsite porphyry–Cu deposit, suggest two different magma sources in the Chelopech–Elatsite magmatic area. Magmatic rocks associated with the Elatsite porphyry–Cu deposit and the dacitic dome-like body north of Chelopech are characterized by zircons with ɛHf_T90 values of ∼5, which suggest an important input of mantle-derived magma. Some zircons display lower ɛHf_T90 values, as low as −6, and correlate with increasing ²⁰⁶Pb/²³⁸U ages up to about 350 Ma, suggesting assimilation of basement rocks during magmatism. In contrast, zircon grains in andesitic rocks from Chelopech are characterized by homogeneous ¹⁷⁶Hf/¹⁷⁷Hf isotope ratios with ɛHf_T90 values of ∼1 and suggest a homogeneous mixed crust–mantle magma source. We conclude that the Elatsite porphyry–Cu and the Chelopech high-sulfidation epithermal deposits were formed within a very short time span and could be partly contemporaneous. However, they are related to two distinct upper crustal magmatic reservoirs, and they cannot be considered as a genetically paired porphyry–Cu and high-sulfidation epithermal related to a single magmatic–hydrothermal system centered on the same intrusion.