High-field cantilever magnetometry as a tool for the determination of the magnetocrystalline anisotropy of single crystals

Cantilever torque magnetometry is utilized widely in physics and material science for the determination of magnetic properties of thin films and semiconductors. Here, we report on its first application in rock magnetism, namely the determination of K₁ and K₂ of single crystal octahedra of natural magnetite. The design of cantilever magnetometers allows optimization for the specific research question at hand. For the present study, a cantilever magnetometer was used that enables measurement of samples with a volume up to 64 mm³. It can be inserted into an electromagnet with a maximum field of 2 T. The cantilever spring is suitable for torque values ranging from 7.5 × 10^− 7 N·m to 5 × 10^− 6 N·m. The torque is detected capacitively; the measured capacitance is converted into torque by using a calibrated feedback coil. The magnetometer allows in-situ rotation of the sample in both directions and is, therefore, also suitable to analyze rotational hysteresis effects.The evaluation of the magnetite anisotropy constants involved Fourier analysis of the torque signal on the magnetite crystals' (001) and (110) planes. The absolute anisotropy constant has been computed using the extrapolation-to-infinite-field method. The value of K₁ at room temperature is determined at − 1.28 × 10⁴ [J m^− 3] (± 0.13, i.e. 10%) and that of K₂ at − 2.8 × 10³ [J m^− 3] (± 0.1, i.e. 2%). These values concur with earlier determinations that could not provide an instrumental error, in contrast with this work.The cantilever magnetometer performs four times faster than other torque magnetometers used for rock magnetic studies. This makes the instrument also suitable for magnetic fabric analysis.     

Stormy geomorphology: geomorphic contributions in an age of climate extremes

The increasing frequency and/or severity of extreme climate events are becoming increasingly apparent over multi‐decadal timescales at the global scale, albeit with relatively low scientific confidence. At the regional scale, scientific confidence in the future trends of extreme event likelihood is stronger, although the trends are spatially variable. Confidence in these extreme climate risks is muddied by the confounding effects of internal landscape system dynamics and external forcing factors such as changes in land use and river and coastal engineering. Geomorphology is a critical discipline in disentangling climate change impacts from other controlling factors, thereby contributing to debates over societal adaptation to extreme events. We review four main geomorphic contributions to flood and storm science. First, we show how palaeogeomorphological and current process studies can extend the historical flood record while also unraveling the complex interactions between internal geomorphic dynamics, human impacts and changes in climate regimes. A key outcome will be improved quantification of flood probabilities and the hazard dimension of flood risk. Second, we present evidence showing how antecedent geomorphological and climate parameters can alter the risk and magnitude of landscape change caused by extreme events. Third, we show that geomorphic processes can both mediate and increase the geomorphological impacts of extreme events, influencing societal risk. Fourthly, we show the potential of managing flood and storm risk through the geomorphic system, both near‐term (next 50 years) and longer‐term. We recommend that key methods of managing flooding and erosion will be more effective if risk assessments include palaeodata, if geomorphological science is used to underpin nature‐based management approaches, and if land‐use management addresses changes in geomorphic process regimes that extreme events can trigger. We argue that adopting geomorphologically‐grounded adaptation strategies will enable society to develop more resilient, less vulnerable socio‐geomorphological systems fit for an age of climate extremes. © 2016 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Dynamics of salt marsh margins are related to their three-dimensional functional form

The three-dimensional configuration of sedimentary landforms in intertidal environments represents a major control on regional hydrodynamics. It modulates the location and magnitude of forces exerted by tidal currents and waves on the landform itself and on engineered infrastructure such as sea walls or coastal defences. Furthermore, the effect is reflexive, with the landforms representing an integrated, long-term response to the forces exerted on them. There is a strong reciprocal linkage between form and process (morphodynamics) in the coastal zone which is significantly lagged and poorly understood in the case of cohesive, vegetated sediments in the intertidal zone. A method is presented that links the geometric properties of the tidal flat–salt marsh interface to the history and potential future evolution of that interface. A novel quantitative classification scheme that is capable of separating marsh margins based on their functional form is developed and is applied to demonstrate that relationships exist between landform configuration and morphological evolution across a regional extent. This provides evidence of a spatially variable balance between self-organized and external controls on morphodynamic evolution and the first quantitative basis for a quick assessment procedure for likely future dynamism. © 2019 John Wiley & Sons, Ltd.     

Connecting physical watershed characteristics to climate sensitivity for California mountain streams

California mountain streams provide critical water resources for human supplies and aquatic ecosystems, and have been affected by climatic changes to varying degrees, often within close proximity. The objective of this study is to examine stream flow timing changes and their climatic drivers through 2009, identify sub-regional patterns in response and sensitivity, and explore whether the differences in the sensitivity of a stream to climatic changes can be partially explained through the physical characteristics of a watershed. To this end, changes in streamflow timing for each watershed were assessed through several runoff timing measures, and overall sensitivity to historic climatic changes through a composite sensitivity index. Elevation, aspect, slope, geology, and landcover distributions, as well as climate information were assembled for each watershed; and were analyzed in conjunction with the sensitivity index. Results showed that the basins most sensitive to climatic changes are on the western Sierra Nevada slopes, while eastern and southern Sierra Nevada, as well as Klamath mountain watersheds exhibit little or no response to climatic shifts to date. Basin sensitivity was not found to be connected to any individual physical watershed characteristic other than elevation. However, it is suggested that basin-to-basin differences in sensitivity, observed in spite of regional-scale warming and similar watershed elevations, can be explained by differences in elevation ranges and combinations of physical watershed characteristics. Results about stream differences in climate sensitivity could aid in prioritizing stream preservation efforts.     

Effects of projected climate change on the hydrology in the Mono Lake Basin, California

The Californian Mono Lake Basin (MLB) is a fragile ecosystem, for which a 1983 ruling carefully balanced water diversions with ecological needs without the consideration of global climate change. The hydroclimatologic response to the impact of projected climatic changes in the MLB has not been comprehensively assessed and is the focus of this study. Downscaled temperature and precipitation projections from 16 Global Climate Models (GCMs), using two emission scenarios (B1 and A2), were used to drive a calibrated Soil and Water Assessment Tool (SWAT) hydrologic model to assess the effects on streamflow on the two significant inflows to the MLB, Lee Vining and Rush Creeks. For the MLB, the GCM ensemble output suggests significant increases in annual temperature, averaging 2.5 and 4.1 °C for the B1 and A2 emission scenarios, respectively, with concurrent small (1–3 %) decreases in annual precipitation by the end of the century. Annual total evapotranspiration is projected to increase by 10 mm by the end of the century for both emission scenarios. SWAT modeling results suggest a significant hydrologic response in the MLB by the end of the century that includes a) decreases in annual streamflow by 15 % compared to historical conditions b) an advance of the peak snowmelt runoff to 1 month earlier (June to May), c) a decreased (10–15 %) occurrence of ‘wet’ hydrologic years, and d) and more frequent (7–22 %) drought conditions. Ecosystem health and water diversions may be affected by reduced water availability in the MLB by the end of the century.     

Differential Effects of Bivalves on Sediment Nitrogen Cycling in a Shallow Coastal Bay

In coastal ecosystems, suspension-feeding bivalves can remove nitrogen though uptake and assimilation or enhanced denitrification. Bivalves may also retain nitrogen through increased mineralization and dissimilatory nitrate reduction to ammonium (DNRA). This study investigated the effects of oyster reefs and clam aquaculture on denitrification, DNRA, and nutrient fluxes (NO _x , NH₄ ⁺, O₂). Core incubations were conducted seasonally on sediments adjacent to restored oyster reefs (Crassostrea virginica), clam aquaculture beds (Mercenaria mercenaria) which contained live clams, and bare sediments from Smith Island Bay, Virginia, USA. Denitrification was significantly higher at oyster reef sediments and clam aquaculture site than bare sediment in the summer; however, DNRA was not enhanced. The clam aquaculture site had the highest ammonium production due to clam excretion. While oyster reef and bare sediments exhibited seasonal differences in rate processes, there was no effect of season on denitrification, or dissimilatory nitrate reduction to ammonium (DNRA) or ammonium flux at the clam aquaculture site. This suggests that farm management practices or bivalve metabolism and excretion may override seasonal differences. When water column nitrate concentration was elevated, denitrification increased in clam aquaculture site and oyster reef sediments but not in bare sediment; DNRA was only stimulated at the clam aquaculture site. This, along with a significant and positive relationship between denitrification and sediment organic matter, suggests that labile carbon limited nitrate reduction at the bare sediment site. Bivalve systems can serve as either net sinks or sources of nitrogen to coastal ecosystems, depending mainly on the type of bivalve, location, and management practices.     

Effect of vegetation cover and sediment type on 3D subsurface structure and shear strength in saltmarshes

The vulnerability of saltmarshes to lateral erosion at their margin depends on the local biogeomorphological properties of the substrate. In particular, the 3D architecture of pore and root systems is expected to influence shear strength, with repercussions for the wider-scale stability of saltmarshes. We apply X-ray computed microtomography (μCT) to visualize and quantify subsurface structures in two UK saltmarshes at Tillingham Farm, Essex (silt/clay rich substrate) and Warton Sands (sand-rich substrate), with four types of ground cover: bare ground, Spartina spp, Salicornia spp and Puccinellia spp. We extracted μCT structural parameters that characterize pore and root morphologies at each station, and compared them with field measurements of shear strength using a principal component analysis and correlation tests. The 3D volumes show that species-dependent variations in root structures, plant colonization events and bioturbation activity control the morphology of macropores, while sediment cohesivity determines the structural stability and persistence of these pore structures over time, even after the vegetation has died. Areas of high porosity and high mean pore thickness were correlated to lower values of shear strength, especially at Tillingham Farm, where well-connected vertical systems of macropores were associated with current or previous colonization by Spartina spp. However, while well-connected systems of macropores may lower the local deformation threshold of the sediment, they also encourage drainage, promote vegetation growth and reduce the marsh vulnerability to hydrodynamic forces. The highest values of shear strength at both sites were found under Puccinellia spp, and were associated with a high density of mesh-like root structures that bind the sediment and resist deformation. Future studies of marsh stability should ideally consider time series of vegetation cover, especially in silt/clay-dominated saltmarshes, in order to consider the potential effect of preserved buried networks of macropores on water circulation, marsh functioning and cliff-face erosion.     

Earthquake focal mechanisms and stress orientations in the eastern Swiss Alps

This study presents an updated set of earthquake focal mechanisms in the Helvetic and Penninic/Austroalpine domains of the eastern Swiss Alps. In eight cases, based on high-precision relative hypocentre locations of events within individual earthquake sequences, it was possible to identify the active fault plane. Whereas the focal mechanisms in the Helvetic domain are mostly strike-slip, the Penninic/Austroalpine domain is dominated by normal-faulting mechanisms. Given this systematic difference in faulting style, an inversion for the stress field was performed separately for the two regions. The stress field in the Penninic/Austroalpine domain is characterized by extension oriented obliquely to the E–W strike of the orogen. Hence, the Penninic nappes, which were emplaced as large-scale compressional structures during the Alpine orogenesis, are now deforming in an extensional mode. This contrasts with the more compressional strike-slip regime in the Helvetic domain towards the northern Alpine front. Relative to the regional stress field seen in the northern Alpine foreland with a NNW–SSE compression and an ENE–WSW extension, the orientation of the least compressive stress in the Penninic/Austroalpine domain is rotated counter-clockwise by about 40°. Following earlier studies, the observed rotation of the orientation of the least compressive stress in the Penninic/Austroalpine region can be explained as the superposition of the regional stress field of the northern foreland and a uniaxial extensional stress perpendicular to the local trend of the Alpine mountain belt.     

New insights into the mineralogy and weathering of the Meridiani Planum meteorite,Mars

Meridiani Planum is the first officially recognized meteorite find on the surface of Mars. It was discovered at and named after the landing site of the Mars Exploration Rover Opportunity. Based on its composition, it was classified as a IAB complex iron meteorite. Mössbauer spectra obtained by Opportunity are dominated by kamacite (α‐Fe‐Ni) and exhibit a small contribution of ferric oxide. Several small features in the spectra have been neglected to date. To shed more light on these features, five iron meteorite specimens were investigated as analogs to Meridiani Planum with a laboratory Mössbauer setup. Measurements were performed on (1) their metallic bulk, (2) troilite (FeS) inclusions, (3) cohenite ((Fe,Ni,Co)₃C) and schreibersite ((Fe,Ni)₃P), and (4) corroded rims. In addition to these room‐temperature measurements, a specimen from the Mundrabilla IAB‐ungrouped meteorite was measured at Mars‐equivalent temperatures. Based on these measurements, the features in Meridiani Planum spectra can be explained with the presence of small amounts of schreibersite and/or cohenite and iron oxides. The iron oxides can be attributed to a previously reported coating on Meridiani Planum. Their presence indicates weathering through the interaction of the meteorite with small amounts of water.