Source selectivity: An assessment of volcanic glass sources in the southern primorye region,far East Russia

Artifacts made from volcanic glass have been found in archaeological contexts dating from the Late Palaeolithic (ca. 20,000 yr B.P.) through to the end of the Bronze Age (ca. 2700 yr B.P.) in the southern Primorye region of Far East Russia. A geoarchaeological survey of volcanic glass outcrops assessed the various potential sources to determine their potential for sustained exploitation. A characterization study of source samples and artifacts from 27 spatially and temporally dispersed sites using a combination of PIXE‐PIGME and relative density identified which sources had actually been exploited and a technological analysis of the assemblages described patterns of use. The combination of these three approaches shows the impact of a relatively stable geological environment on patterns of procurement and exchange. © 2008 Wiley Periodicals, Inc.     

Borehole-guided AVO analysis of P-P and P-S reflections: Quantifying uncertainty on density estimates

Seismic properties of isotropic elastic formations are characterized by the three parameters: acoustic impedance, Poisson's ratio and density. Whilst the first two are usually well estimated by analysing the amplitude variation with angle (AVA) of reflected P‐P waves, density is known to be poorly resolved. However, density estimates would be useful in many situations encountered in oil and gas exploration, in particular, for minimizing risks in looking ahead while drilling. We design a borehole seismic experiment to investigate the reliability of AVA extracted density. Receivers are located downhole near the targeted reflectors and record reflected P‐P and converted P‐S waves. A non‐linear, wide‐angle‐based Bayesian inversion is then used to access the a posteriori probability distributions associated with the estimation of the three isotropic elastic parameters. The analysis of these distributions suggests that the angular variation of reflected P‐S amplitudes provides additional substantial information for estimating density, thus reducing the estimate uncertainty variance by more than one order of magnitude, compared to using only reflected P‐waves.     

The spectrum of comet C/2009 R1 (McNaught) in 4140–5240 Å wavelength region

The spectroscopic observations of comet C/2009 R1 (McNaught) were carried out with the 2 m Zeiss-RCC Telescope of Pik Terskol Observatory operated by the International Center for Astronomical and Medico-Ecological Research (Ukraine, Russia). The Multi Mode Cassegrain spectrometer was used to obtain spectra of moderate spectral resolving power with a wavelength coverage from 4140 to 5240 Å. The spectrum is characterized by the extremely low continuum level and strong molecular features. 192 emission lines of C₂, CN, CH, NH₂, CO⁺, and CH⁺ have been identified by the comparison of the observed and theoretical spectra of the molecules. The ratios of the gas production rates of Q(C₂)/Q(CN)=1.32, Q(CH)/Q(CN)=0.49, and Q(NH₂)/Q(CN)=0.81 were derived using a Haser model.     

Combination of ICP-AES and Instrumental Neutron Activation Analysis as Effective Methods for Studying Distribution of Elements in Soil and Plants

A detailed characterisation was carried out for soil sampled from sites with different levels of contamination before and after the cultivation of oats and barley. Mineralogical composition, concentration of exchangeable cations, dynamics of soil pH and acid neutralisation buffer capacity of the soil were studied. A total of 21 elements in the soil and 28 elements in the plants were determined by instrumental neutron activation analysis. Distribution of Al, Cr, Mn, Fe, Co, Ni, Cu, Zn and Pb in soil leachates was studied by sequential leaching procedure and ICP-AES. It was found that plants significantly affect most of the soil characteristics including the leaching of heavy metals.     

Global 1° × 1° thermal model TC1 for the continental lithosphere: Implications for lithosphere secular evolution

This paper reports a new 1° × 1° global thermal model for the continental lithosphere (TC1). Geotherms for continental terranes of different ages (> 3.6 Ga to present) constrained by reliable data on borehole heat flow measurements (Artemieva, I.M., Mooney, W.D. 2001. Thermal structure and evolution of Precambrian lithosphere: a global study. J. Geophys. Res 106, 16387–16414.), are statistically analyzed as a function of age and are used to estimate lithospheric temperatures in continental regions with no or low-quality heat flow data (ca. 60% of the continents). These data are supplemented by cratonic geotherms based on electromagnetic and xenolith data; the latter indicate the existence of Archean cratons with two characteristic thicknesses, ca. 200 and > 250 km. A map of tectono-thermal ages of lithospheric terranes complied for the continents on a 1° × 1° grid and combined with the statistical age relationship of continental geotherms (z = 0.04  t + 93.6, where z is lithospheric thermal thickness in km and t is age in Ma) formed the basis for a new global thermal model of the continental lithosphere (TC1). The TC1 model is presented by a set of maps, which show significant thermal heterogeneity within continental upper mantle, with the strongest lateral temperature variations (as large as 800 °C) in the shallow mantle. A map of the depth to a 550 °C isotherm (Curie isotherm for magnetite) in continental upper mantle is presented as a proxy to the thickness of the magnetic crust; the same map provides a rough estimate of elastic thickness of old (> 200 Ma) continental lithosphere, in which flexural rigidity is dominated by olivine rheology of the mantle.Statistical analysis of continental geotherms reveals that thick (> 250 km) lithosphere is restricted solely to young Archean terranes (3.0–2.6 Ga), while in old Archean cratons (3.6–3.0 Ga) lithospheric roots do not extend deeper than 200–220 km. It is proposed that the former were formed by tectonic stacking and underplating during paleocollision of continental nuclei; it is likely that such exceptionally thick lithospheric roots have a limited lateral extent and are restricted to paleoterrane boundaries. This conclusion is supported by an analysis of the growth rate of the lithosphere since the Archean, which does not reveal a peak in lithospheric volume at 2.7–2.6 Ga as expected from growth curves for juvenile crust.A pronounced peak in the rate of lithospheric growth (10–18 km³/year) at 2.1–1.7 Ga (as compared to 5–8 km³/year in the Archean) well correlates with a peak in the growth of juvenile crust and with a consequent global extraction of massif-type anorthosites. It is proposed that large-scale variations in lithospheric thickness at cratonic margins and at paleoterrane boundaries controlled anorogenic magmatism. In particular, mid-Proterozoic anorogenic magmatism at the cratonic margins was caused by edge-driven convection triggered by a fast growth of the lithospheric mantle at 2.1–1.7 Ga. Belts of anorogenic magmatism within cratonic interiors can be caused by a deflection of mantle heat by a locally thickened lithosphere at paleosutures and, thus, can be surface manifestations of exceptionally thick lithospheric roots. The present volume of continental lithosphere as estimated from the new global map of lithospheric thermal thickness is 27.8 (± 7.0) × 10⁹ km³ (excluding submerged terranes with continental crust); preserved continental crust comprises ca. 7.7 × 10⁹ km³. About 50% of the present continental lithosphere existed by 1.8 Ga.     

Using Mg Isotopes to Trace Cyanobacterially Mediated Magnesium Carbonate Precipitation in Alkaline Lakes

This study assesses the potential use of Mg isotopes to trace Mg carbonate precipitation in natural waters. Salda Lake (SW Turkey) was chosen for this study because it is one of the few modern environments where hydrous Mg carbonates are the dominant precipitating minerals. Stromatolites, consisting mainly of hydromagnesite, are abundant in this lake. The Mg isotope composition of incoming streams, groundwaters, lake waters, stromatolites, and hydromagnesite-rich sediments were measured. Because Salda Lake is located in a closed basin, mass balance requires that the Mg isotopic offset between Lake Salda water and precipitated hydromagnesite be comparable to the corresponding offset between Salda Lake and its water inputs. This is consistent with observations; a ??²⁶Mg offset of 0.8?C1.4??? is observed between Salda Lake water and it is the incoming streams and groundwaters, and precipitated hydromagnesite has a ??²⁶Mg 0.9?C1.1??? more negative than its corresponding fluid phase. This isotopic offset also matches closely that measured in the laboratory during both biotic and abiotic hydrous Mg carbonate precipitation by cyanobacteria (Mavromatis, V., Pearce, C., Shirokova, L. S., Bundeleva, I. A., Pokrovsky, O. S., Benezeth, P. and Oelkers, E.H.: Magnesium isotope fractionation during inorganic and cyanobacteria-induced hydrous magnesium carbonate precipitation, Geochim. Cosmochim. Acta, 2012a. 76, 161?C174). Batch reactor experiments performed in the presence of Salda Lake cyanobacteria and stromatolites resulted in the precipitation of dypingite (Mg₅(CO₃)₄(OH)₂·5(H₂O)) and hydromagnesite (Mg₅(CO₃)₄(OH)₂·4H₂O) with morphological features similar to those of natural samples. Concurrent abiotic control experiments did not exhibit carbonate precipitation demonstrating the critical role of cyanobacteria in the precipitation process.     

Features of the ionosphere behavior before the Kythira 2006 earthquake

In this paper we present specific features of TEC (total electron content of the ionosphere) behavior as possible precursors of Kythira (Southern Greece) earthquake of January 8, 2006 (M6.8). For this purpose, we used both the TEC data of GPS-IGS stations nearest to the epicenter, and TEC maps over Europe. The favorable circumstance for this analysis was the quiet geomagnetic situation during the period prior to the earthquake. One day before the earthquake, a characteristic anomaly was found out as the day-time significant increase of TEC at the nearest stations, up to the value of 50% relative to the background condition. To estimate the spatial dimensions of seismo-ionospheric anomaly, the differential mapping method was used. The ionosphere modification as a cloud-like increase of electron concentration situated in the immediate vicinity of the forthcoming earthquake epicenter has been revealed. The amplitude of modification reached the value of 50% relative to the non-disturbed condition and was in existence from 10:00 till 22:00 UT. The area of significant TEC enhancement had a size of about 4000 km in longitude and 1500 km in latitude.     

Geographic information system for semi‐detailed mapping of soils in a semi‐arid region

Abstract

The paper presents a GIS model for mapping soils in the semi arid region of Israel. The model is based on a priori knowledge of the soil generating factors in the study area, namely (1) the parent‐material (lithology) which determines the origin of the soil; and (2) the relief (including the drainage patents) which is responsible for erosion, deposition, and leaching processes along the catena. A special attempt was made to represent soil belts in small subwatersheds with different parent‐material. The width of these belts can be varied as a function of the local relief.

We believe that GIS techniques, in contrast to conventional survey and mapping methods, have the potential to overcome the manpower and fiscal restrictions which limit monitoring of large areas and areas which are for different reasons difficult to access. However, systematically generalizing a spatial model for a large area may introduce some errors, either due to local variations which were not taken into account, or regional variations.     

Computer Expert System for Epithermal Gold-Silver Deposit Prognostication (Okhotsk–Chuckchee Volcanic Belt,Northeast Russia)

The Okhotsk–Chuckchee volcanic belt (OCVB) represents a world class gold–silver province, being a well-studied part of the Circum-Pacific Rim. Extensive research, preceding the system compilation, included collection of various data on major gold–silver, silver–lead–zinc, and tin–silver ore fields (with some data on minor gold–quartz, gold–sulfide, and gold–rare-metal sites). The database consists of 129 ore fields of the OCVB and comprises 433 geological, mineralogical, geochemical, and geophysical indicators. Using the original pattern recognition programs (accounting the frequencies and correlation of the indicators), the most informative indicators were selected, their weights (both positive and negative) were identified, and an expert system (solution tree) was compiled. The computer system is intended to be an assistance to an expert in the ore field potential evaluation. The system includes several blocks of questions with a goal of classifying the geochemical type and size of the analyzed ore field. The questions have an indirect character, so they could be answered by an expert at early stages of exploration (before drilling). The level of recognition of sizes of the ore sites in the control populations is 95% or higher. The aim of the expert system is to reestimate a large number of known ore sites in a relatively brief period of time with the aid of the personal computer. The revealed patterns could be used in other less studied parts of the Circum-Pacific belt.