Rock Physics Modeling and Reservoir Characterization to Estimate Hydrocarbon Zone of Cretaceous and Paleocene Strata and Subsurface Stratigraphic Correlation of Sulaiman Fold Belt to Sulaiman Depression

Doklady Earth Sciences - The research work involves rock physics modeling and reservoir characterization of Suliman fold belt to sulamain fold depression. This area is a brighter zone for...     

A laboratory investigation of bed-load transport of gravel sediments under dam break flow

Dam break flows and resulting river bed erosion can have disastrous impacts on human safety,infrastructure,and environmental quality.However,there is a lack of research on the mobility of non-uniform sediment mixtures resulting from dam break flows and how these differ from uniform sized sediment.In this paper,laboratory flume experiments revealed that coarse and fine fractions in non-uniform sediment had a higher and a lower bed-load parameter,respectively,than uniform sediments of the same size.Thus,the finer fractions were more stable and the coarser fractions were more erodible in a nonuniform bed compared to a uniform-grained bed.These differences can be explained by the hiding and protrusion of these fractions,respectively.By investigating changes in mobility of the mixed-size fractions with reservoir water levels,the results revealed that at low water levels,when the coarser fractions were only just mobile,the bed-load parameter of the finer fractions was higher than the coarser fractions.The opposite was observed at a higher water level,when a significant proportion of the coarsest fractions was mobilized.The higher protrusion of these grains had an important effect on their mobility relative to the finer grains.The transported sediment on these mixed-sized beds was coarser than the initial bed sediment,and became coarser with an increase in reservoir water level.     

Study on the geochemical correlation of crude oils of Palaeocene and Jurassic ages from the Potowar Indus Basin in northern Pakistan

This study deals with a detailed geochemical characterization of three crude oils from the Upper Indus Basin, Punjab, Pakistan. The samples were obtained from three productive oil fields of the Datta Formation (Jurassic), Lochhart (Palaeocene) and the Dhak Pass zone (Palaeocene). The GC parameters for and the bulk properties of Datta Formation oils are essentially coincident with those of the oils from the Dhak Pass Formation in the Upper Indus Basin, Pakistan and the oils likely originate from a marine source rock. In contrast, the Lockhart Formation oils show different behaviors and seem to be originated from dirty carbonate rocks although all three crude oils are mature, being of non-biodegraded and somewhat mixed organic matter origin. Low Pr/Ph values and high C₃₅ homohopane index for the Lockhart Formation oils suggest a source of anoxic environment with low Eh while oils from the Datta Formation and Dhak Pass Formation showed different trends, i.e., lower values of C₃₅ homohopane index indicating different depositional environment than oil from the Lockhart Formation. All three crude oils from the Upper Indus Basin are mature for the hopane ratios, i.e., Ts/Ts+Tm, C₃₂22S/(S+R) and C₃₀ αβ/(αβ+βα) and sterane ratios, i.e., C₂₉22S/(S+R) and C₂₉ββ/(ββ+αα) but oils from the Lockhart Formation seem to be less mature than those from the Palaeocene and Datta Formation according to plots like API° vs. homohopane Index, Pr/Ph vs. sterane. The relative composition of 5α(H), 14β(H), 17β(H)-24-ethylecholestanes and the C₂₉20S/20S+20R index, indicate that all three crude oils are equally mature, which makes it unlikely with respect to the above said plots. This difference is may be due to the migratory chromatography which alters the concentrations of sterane and hoapnes and hence gives different results. These oils do not exhibit UCM and have complete n-alkane profiles indicating non-biodegradation.     

Thermal Climate Variations and Potential Modification of the Cropping Pattern in Bangladesh

Summary Changes in the thermal climate due to inter-annual climatic variability can potentially modify existing cropping pattern by forcing farmers to rearrange transplanting and harvesting dates. In the present study, a crop climate model, the YIELD, has been applied to 12 meteorological stations located in major rice growing regions in Bangladesh to estimate the effect of thermal climate variations on the transplanting and harvesting dates of boro rice and the resultant potential changes in cropping pattern and spatial shift. The abnormal thermal climate scenarios have been created by synthetically perturbing mean air temperatures (T_air) up to −5 °C to +5 °C with an interval of 1 °C for each of these stations. Historical meteorological records of air temperature in Bangladesh have been used to prepare these scenarios. The study finds that under abnormally cool conditions transplanting dates will be pushed well into February to avoid plant injury and harvesting dates will be moved into the monsoon. The growing seasons will be longer under cooler than normal thermal conditions. Under abnormally warm conditions harvesting dates will be established well into March and will cause reduction of yield due to a shorter growing season. These conditions will also cause spatial shift in crop potential and changes in the cropping pattern. Due to a longer boro rice growing season farmers will lose a significant amount of cropping land which is usually used for low and deep water rice cultivation. New crops will need to be introduced during the beginning of a year to overcome the loss of production under abnormally cool conditions. Wheat and potato can be good options for the farmers for such conditions. New aus rice variety needs to be introduced after the boro harvesting under warmer than the normal conditions to overcome the loss of yield due to a shorter growing season. Received September 16, 1996 Revised September 8, 1997     

The CERES‐Rice Model‐Based Estimates of Potential Monsoon Season Rainfed Rice Productivity in Bangladesh*

Agricultural practices in Bangladesh are largely dependent on the monsoonal rainfall. Historically, Bangladesh often experiences severe droughts and floods during the monsoon months, with significant crop losses during both extreme conditions. This article provides a quantitative assessment of potential monsoon‐season aman rice for four transplanting dates: 1 June, 1 July, 15 July, and 15 August. A crop‐growth simulation model, the CERES‐Rice, is applied to sixteen locations representing major rice‐growing regions of Bangladesh to determine baseline yield estimates for four transplanting dates. The applications were conducted for 1975 through 1987. Average potential yield in Bangladesh is 6,907, 5,039, 3,637, and 1,762 kg ha^?1 for the above transplanting dates, respectively. In other words, Bangladesh would obtain 27 percent, 48 percent, and 75 percent less yield for 1 July, 15 July, and 15 August transplanting, respectively, than for 1 June transplanting. Potential yield vulnerability is the least for 1 June transplanting (up to 5 percent) and the highest (up to 66 percent) for 15 July transplanting date. The model applications show that regional variations exist for potential yield and yield vulnerability for a particular transplanting date. In addition, response of yield and vulnerability for a region changes with transplanting dates.     

Lithologic mapping of a forested montane terrain from Landsat 5 TM image

Thick forest cover and poor infrastructures are the major hindrances for detailed lithologic mapping in an inaccessible montane landscape. To overcome these limitations, we utilize a Landsat 5 TM image to map lithology using vegetation and drainage pattern as an indicator of underlying rock types in a heavily forested region of the Chittagong Hill Tracts area located in southeastern Bangladesh. We use supervised and unsupervised classifiers for a vegetation-based approach while on-screen digitization is used for drainage patterns-based mapping. Field observations were used for mapping lithology and evaluating accuracy. Overall, our results agree well with the current geologic map and improve it by providing a more spatially detailed distribution of the sandstone and shale. The performances of all approaches are good at the inner and outer flanks of anticlines located in the study area while the drainage pattern mapping performs best at the mid-flank area.     

Composition and structure of species along altitude gradient in Moghan-Sabalan rangelands,Iran

This study provides a checklist of species distributed at the altitude gradient of Moghan-Sabalan rangelands in Ardabili province, Northwest Iran. We evaluated the changes in species composition, growth types of species, Raunkiaer’s life forms, geographical distribution, threat and endemicity status, and palatability of species along two altitudinal gradients in the sampling plots, which were conducted in eleven sites/habitats with 300 meters above sea level (masl) altitude intervals (from 100 to 3300 masl). We assessed the plant species composition with special reference to the gradient analysis, and identified overall 396 species, which was comprising 44 families and 194 genera. Results showed that Asteraceae family is by far the most species-rich family, followed by Poaceae, Fabaceae, Caryophyllaceae and Brassicaceae. Among the genera, Astragalus is the most diverse genus, followed by Allium, Veronica and Bromus, Galium, Silene and Ranunculus. Results indicated that the number of species increased as the altitude increased to 1200–1500 masl, but then starts to decline to 3300 masl. Family-to-genera ratio was 1:4.4, the family-tospecies ratio was 1:9, and the genera-to-species ratio was 1:2.04. Growth type of species analysis shows that the frequency of perennial plants was higher in the study area followed by annual species while the lower group was biennial species. The number of annuals showed a decreasing trend towards higher altitude. Hemicryptophytes and therophytes were the most frequent life forms constituted each with (41.9%). Hemicryptophytes showed an increasing trend with altitude, while therophytes showed a decreasing trend with altitude increase, followed by geophytes, chamaephytes, and phanerophytes. Results showed more than half of the species of the study area belonged to Iran-Turanian region and these species showed an increasing trend with altitude. In contrast, Sahara-Sindian species comprise a minor component of the spectrum, with decreasing trend with altitude. The rare and endangered species out of the surveyed taxonomic groups comprised 53 species in total which 29 of them are considered lower risk (LR), 13 data deficient (DD), 5 vulnerable (Vu) and with 3 rare (R) and identified endemic plants comprised 24 species. Some 56.6% species were identified as class III, 22.6% were class I and 20.8% were class II as the palatability variation. Moghan-Sabalan rangelands require strong conservation management policies in case of species loss and changing natural communities due to the occurrence of conversion into cropland, over-grazing and other anthropogenic effects.     

Investigation of Headcut Erosion in Cohesive Soils

Headcut, known as knickpoint migration too, is developed due to sudden change in channel bed followed by bed scour and erosion which progressing upstream. The results are the downstream morphological change and transporting massive sediment to the downstream reservoir. Most of the past studies focus on non-cohesive soils, although many problems occur because of cohesive soils. In this study, 10 different samples of cohesive soils in long term consolidation with different composition of silt and clay were tested under different circumstances of waterfall height and flow velocity to investigate the neck migration rate and the sediment yield. Tests were continued to reach a constant migration rate. One of the effective phenomena in all tests was tensional cracks on soil surface. The size and number of these cracks have inverse relation with percent of clay. Because of these cracks, massive erosion occurs at the beginning of all tests. By reducing percent of clay, headcut, waterfall height and sediment yield were increased and by reducing waterfall height and flow velocity these parameters were reduced. In lower percent of clay, headcut erosion will occur quickly with more slants. Caving phenomenon was not observed in any tests and massive erosion rate was more quickly.