Influence of macrofauna long-term natural variability on benthic indices used in ecological quality assessment

An essential prerequisite for the assessment of the ecological quality of marine ecosystems is the understanding of the natural variability and its effect on the performance of quality indices. This study is focused on the long-term natural variability of diversity, biotic and multimetric indices by using long-term macrofauna data of a coastal area in the southern North Sea (1978-2005). The univariate and most biotic and multimetric indices respond significantly on specific natural disturbance events such as cold winters, but the strength of response varied between indices as well as between events. As a result, the ecological quality status can decrease over a range of 3 (out of 5) classification units. The overall ecological quality was good to high, but an increase of indices occurred from the mid 1980s onwards due to changes in the climate regime. This long-term variability has to be considered within ecological quality assessment schemes.     

Groundwater in fractured crystalline rocks, the Clara mine, Black Forest (Germany)

The chemical composition of water sampled in a 700 m deep underground barite-fluorite mine in the crystalline basement of the Black Forest area (SW Germany) varies systematically with depth and the length of flow paths trough, the fracture porosity of the gneiss matrix. Calcium and sulfate increase as a result of a combined sulfide oxidation and plagioclase alteration reaction. The gneiss contains andesine–plagioclase (An₂₀–An₄₀) and is rich in primary sulfide. As an effect of Ca and SO₄ release by the prime water–rock reaction, dissolved oxygen decreases and the waters become more reduced. The waters have Cl/Br mass ratios of about 50, which is very close to that of experimentally leached gneiss powders indicating that the rock matrix is the source of the halogens. The waters are undersaturated with respect to calcite in the upper parts of the mine. With increasing reaction progress, calcite saturation is reached and carbonate forms as a reaction product of the prime reaction that also controls the partial pressure of CO₂ to progressively lower values. The chemical evolution of groundwater in fractured basement of the Clara mine suggests that the partial pressure of CO₂ is an internally buffered parameter rather than a controlling external variable.     

Spatial and compositional variations within finely laminated mineral crusts at Carpenter's Gap,an archaeological site in tropical Australia

Mineralogical and geochemical variations in ten rock surface crusts are described from a large rock shelter known as Carpenter's Gap 1 in the southern Kimberley, formed at the junction between a sandstone floor and an overlying limestone roof. The finely laminated crusts, containing quartz, clays, oxalate and phosphate minerals, and sulfate salts (bassanite, gypsum, epsomite), formed over quartz‐rich sandstones. Mineralogical analyses of crusts, determined by X‐ray diffraction, and major element geochemical trends, in the form of element maps of cross sections, show a complex distribution of hemi‐, mono‐, and dihydrated sulfate and oxalate minerals vertically and laterally within the shelter. These mineralogical changes have occurred under fluctuating moisture and temperature regimes, which follow a general drying trend spatially with distance from the back wall and temporally over a period of about 20,000 years. Documenting these mineralogical changes is a first step in understanding the nature of microclimatic controls on the formation of rock surface coatings in shelters and their implications for palaeoenvironmental reconstructions and for dating engravings covered by these crusts. © 2001 John Wiley & Sons, Inc.     

Hydraulics of interrill overland flow on rough,bare soil surfaces

A set of laboratory experiments on bare, rough soil surfaces was carried out to study the relationship between soil surface roughness and its hydraulic resistance. Existing models relating roughness coefficients to a measure of surface roughness did not predict the hydraulic resistance well for these surfaces. Therefore, a new model is developed to predict the hydraulic resistance of the surface, based on detailed surface roughness data. Roughness profiles perpendicular to the flow are used to calculate the wet cross‐sectional area and hydraulic radius given a certain water level. The algorithm of Savat is then applied to calculate the hydraulic resistance. The value for the equivalent roughness, which is used in the algorithm of Savat, could be predicted from the roughness profiles. Here, the tortuosity of the submerged part of the surface was used, which means that the calculated roughness depends on flow depth. The roughness increased with discharge, due to the fact that rougher parts of the surface became submerged at higher discharges. Therefore, a single measure of surface roughness (e.g. random roughness) is not sufficient to predict the hydraulic resistance. The proposed model allows the extension of the flow over the surface with increasing discharge to be taken into account, as well as the roughness within the submerged part of the surface. Therefore, the model is able to predict flow velocities reasonably well from discharge and roughness data only. Copyright © 2000 John Wiley & Sons, Ltd.     

Determination of Reference Values for NIST SRM 610–617 Glasses Following ISO Guidelines

We present new reference values for the NIST SRM 610–617 glasses following ISO guidelines and the International Association of Geoanalysts’ protocol. Uncertainties at the 95% confidence level (CL) have been determined for bulk‐ and micro‐analytical purposes. In contrast to former compilation procedures, this approach delivers data that consider present‐day requirements of data quality. New analytical data and the nearly complete data set of the GeoReM database were used for this study. Data quality was checked by the application of the Horwitz function and by a careful investigation of analytical procedures. We have determined quantitatively possible element inhomogeneities using different test portion masses of 1, 0.1 and 0.02 μg. Although avoiding the rim region of the glass wafers, we found moderate inhomogeneities of several chalcophile/siderophile elements and gross inhomogeneities of Ni, Se, Pd and Pt at small test portion masses. The extent of inhomogeneity was included in the determination of uncertainties. While the new reference values agree with the NIST certified values with the one exception of Mn in SRM 610, they typically differ by as much as 10% from the Pearce et al. (1997) values in current use. In a few cases (P, S, Cl, Ta, Re) the discrepancies are even higher.     

Neodymium and Strontium Isotope Data for USGS Reference Materials BCR-1, BCR-2, BHVO-1, BHVO-2, AGV-1, AGV-2, GSP-1, GSP-2 and Eight MPI-DING Reference Glasses

We have measured ⁸⁷Sr/⁸⁶Sr and ¹⁴³ Nd/¹⁴⁴ Nd isotope ratios in different batches and aliquots of the new US Geological Survey (USGS) reference materials (RMs) BCR-2, BHVO-2, AGV-2 and GSP-2 and the original USGS RMs BCR-1, BHVO-1, AGV-1 and GSP-1 by thermal ionisation mass spectrometry. In addition, we also analysed the eight Max-Planck-Institut-Dingwell (MPI-DING) reference glasses. Nearly all isotope ratios obtained in the different aliquots and batches agree within uncertainty limits indicating excellent homogeneity of the USGS powders and the MPI-DING glasses. With the exception of GSP-2, the new USGS RMs are also indistinguishable from the ratios found in the original USGS RMs (⁸⁷Sr/⁸⁶Sr: 0.704960, 0.704958 (BCR-1, -2), 0.703436, 0.703435 (BHVO-1, -2), 0.703931, 0.703931 (AGV-1, -2); ¹⁴³ Nd/¹⁴⁴ Nd: 0.512629, 0.512633 (BCR-1, -2), 0.512957, 0.512957 (BHVO-1, -2); 0.512758, 0.512755 (AGV-1, -2)). This means that for normalisation purposes in Sr and Nd isotope geochemistry BCR-2, BHVO-2 and AGV-2 can well replace BCR-1, BHVO-1 and AGV-1 respectively.     

Lease quota fishing in a changing rock lobster industry

The Tasmanian rock lobster industry has been managed by Individually Transferable Quotas (ITQs) and several input control measures since 1998. In this study, nine years of rock lobster fishing business data were used to categorise the catch and quota ownership traits and examine the response to the introduction of ITQ management. More specifically the study investigates how profit drivers moderated industry structure change.     

The out of ecliptic distribution of interplanetary dust and its relation to other bodies in the solar system

We discuss the out-of-ecliptic component of the interplanetary dust cloud and its relation to the other small bodies in the solar system. The determination of the mass loss of comets, so far is quite uncertain and doesn't allow a finite study of the mass input to the dust cloud. However it is shown, that the dust particles in the inner solar system, i.e. within the earth orbit are most probable produced from a collisional evolution of larger, meteoroid, fragments of cometary origin. A further component of interstellar dust is especially important in the outer solar system and perhaps for the collisional evolution of the small bodies.     

Climate change and the effect of temperature backlashes causing frost damage in Picea abies

In boreal and nemoboreal forests, tree frost hardiness is modified in reaction to cues from day length and temperature. The dehardening processes in Norway spruce, Picea abies, could be estimated to start when the daily mean temperature is above 5 °C for 5 days. Bud burst will occur approximately after 120–170 degree-days above 5 °C, dependent on genetic differences among provenances. A reduced cold hardiness level during autumn and spring and an advanced onset of bud burst are expected impacts of projected future global warming. The aim of this study was to test if this will increase the risk for frost damage caused by temperature backlashes. This was tested for Sweden by comparing output from the Hadley Centre regional climate model, HadRM3H, for the period 1961–1990 with future IPCC scenario SRES A2 and B2 for 2070–2099. Different indices for calculating the susceptibility to frost damage were used to assess changes in frost damage risk. The indices were based on: (1) the start of dehardening; (2) the severity of the temperature backlash; (3) the timing of bud burst; and (4) the cold hardiness level. The start of dehardening and bud burst were calculated to occur earlier all over the country, which is in line with the overall warming in both climate change scenarios. The frequency of temperature backlashes that may cause frost damage was calculated to increase in the southern part, an effect that became gradually less pronounced towards the north. The different timing of the onset of dehardening mainly caused this systematic latitudinal pattern. In the south, it occurs early in the year when the seasonal temperature progression is slow and large temperature variations occur. In the north, dehardening will occur closer to the spring equinox when the temperature progression is faster.