The southern cape conductive belt (South Africa): Its composition, origin and tectonic significance

Magnetometer array studies have led to the discovery and mapping of the Southern Cape Conductive Belt (SCCB) crossing the southern tip of Africa from west to southeast coasts. The SCCB lies just south of the Namaqua-Natal Belt of cratonic rocks remobilized about 1000 m.y. B.P. It is shown that it coincides with a zone of weakness which has been exploited by three major geosynclinal accumulations over some 600 m.y. Relationships between the SCCB and the basement geochronology, geology and tectonics are considered in detail. These relationships support the view that the conductive belt was formed by an accumulation of marine sediments and oceanic lithosphere at the top of a Proterozoic subduction which stopped about 1000 to 800 m.y. B.P. Associated with this subduction we propose a Proterozoic range of Andean mountains, whose roots are now exposed in the Namaqua-Natal Belt. Later subduction further south, near the present south coast, is proposed to account for the intrusion, between the south coast and the SCCB, of the Cape Granites in the time interval 600-500 m.y. B.P. There is some evidence for a third, yet more distant, subduction episode off Permian Gondwanaland. After outlining this tectonic history, the paper turns to a closer examination of the hypothesis that the Southern Cape Conductive Belt consists of partly serpentinized basalt accumulated at the top of a Proterozoic subduction. A large static magnetic anomaly, which correlates with the SCCB over most of its length, is well fitted by a model which strongly supports this hypothesis. Bouguer gravity anomalies along western and central profiles likewise support the hypothesis. A discussion follows of the process of formation of the proposed block of serpentinized marine rocks, beginning with serpentinization of the crust near oceanic ridges by reaction of warm, porous, newly-extruded basalt with seawater convecting through it. The serpentinized basalt is stable at crustal temperatures and pressures and so is transported in the seafloor until it reaches a subduction, where it accumulates because of its low density. Examples of such accumulations are cited. Finally, it is shown that any iron in the olivine and pyroxene in the original basalt precipitates, when these silicates are hydrated to serpentine, as magnetite which is the dominant mineral conferring high electrical conductivity and high magnetic susceptibility on serpentinites. In particular the Beattie static magnetic anomaly requires, in our model calculation, a very high susceptibility readily attainable in basalt at 15–20% serpentinization. The authors know of no other rock able to provide this high susceptibility. A similar percentage of serpentinization provides the density required to model the gravity anomalies.     

Study of neotectonic activity of morphostructures in the central part of the east european craton by remote sensing methods

The combined approach is used for studying recent tectonic activity in the central part of the East European Craton (EEC).This approach incorporates the methods of automated lineament analysis and satellite geodesy with the conventional geological mapping analysis. The space tectonic map (space image based) is reconstructed, and morphostructures that are active at the recent and present tectonic stage are delineated by processing the Landsat image mosaic. The direction and rate of horizontal displacement of crustal blocks, which is caused by deep geodynamical processes, are determined using the GPS data. The study is preliminary since only few GPS stations within the EEC have sufficiently long time series of observations.     

Mass flux and undertow in a surf zone

The mass of water carried shoreward by the breaking waves in a surf zone will, in a two-dimensional situation, be compensated by a seaward return flow, the undertow. It is shown that the undertow is driven by the local difference between radiation stress and the set-up pressure gradient which only balance each other in average over the depth. Turbulent shear stresses are required to maintain a steady situation. Comparison with measurements confirms the theoretical results.     

The subsystem of open clusters in the post-hipparcos era: Cluster structural parameters and proper motions

The wide neighborhoods of 401 open clusters are analyzed using the modern, high-precision, homogeneous ASCC-2.5 all-sky catalog. More than 28000 possible cluster members (including about 12500 most probable members) are identified using kinematic and photometric criteria. Star counts with the ASCC-2.5 and USNO-A2.0 catalogs are used to determine the angular and linear radii of the cluster cores and coronas, which exceed the previously published values by factors of two to three. The segregation (differing central concentration) of member stars by magnitude is observed. The mean proper motions are determined directly in the Hipparcos system for 401 clusters, for 183 of them for the first time. The heliocentric distances of 118 clusters are determined for the first time based on color-magnitude diagrams for their identified members.     

Thermodynamic data from redox reactions at high temperatures. II. The MnO-0Mn3O4 oxygen buffer,and implications for the thermodynamic properties of MnO and Mn3O4

The \(\mu _{O_2 } \) defined by the reaction 6 MnO+O₂ =2 Mn₃O₄ has been determined from 917 to 1,433 K using electrochemical cells (with calcia-stabilized zirconta, CSZ) of the type: Steady emfs were achieved rapidly at all temperatures on both increasing and decreasing temperature, indicating that the MnO-Mn₃O₄ oxygen buffer equilibrates relatively easily. It therefore makes a useful alternative choice in experimental petrology to Fe₂O₃-Fe₃O₄ for buffering oxygen potentials at oxidized values. The results are (in J/mol, temperature in K, reference pressure 1 bar); \(\mu _{O_2 } \) (±200)=-563,241+1,761.758T-220.490T inT+0.101819T ² with an uncertainty of ±200 J/mol. Third law analysis of these data, including a correction for the deviations in stoichiometry of MnO, impliesS _298.15 for Mn₃O₄ of 166.6 J/K · mol, which is 2.5 J/K · mol higher than the calorimetric determination of Robie and Hemingway (1985). The low value of the calorimetric entropy may be due to incomplete ordering of the magnetic spins. The third law value of Δ _r H _298.15 ⁰ is-450.09 kJ/mol, which is significantly different from the calorimetric value of-457.5±3.4 kJ/mol, calculated from Δ _f H _298.15 ⁰ of MnO and Mn₃O₄, implying a small error in one or both of these latter.     

A preliminary case study of potential ceramic raw materials in the Aileu area of Timor Leste

The newly independent country of Timor Leste is located in the eastern half of Timor Island (Indonesian archipelago). Geological studies of the country’s mineral resources and extractive activities are practically non-existent. There is evidence of the exploitation of ceramic raw materials at outcrop level and two small brick kilns, nowadays inactive, in the Dili and Aileu areas. Near Aileu, there are light-coloured silt-rich deposits, interpreted as overbank deposits, interbedded with ancient river terraces (post-Pliocene) overlying metamorphic bedrock. These sediments are the subject of this study, which encompassed geological mapping and preliminary characterisation. Tectonically, the area is a graben, preserving alluvium and colluvium deposits. Five channel samples representative of the silt-rich deposits were collected. Semi-quantitative mineralogical analysis shows that the samples are made of illite, quartz and kaolinite clays, with accessory illite/vermiculite interstratified minerals and K-feldspar. The chemical data show agreement with the estimated mineralogical composition. The grain size distribution points to a silt-dominated assemblage. Most samples have a satisfactory extrudability but deficient moulding properties. After firing, the sampled raw materials form a final product with possible ceramic capability for whiteware production.     

Correlations Developed for Estimation of Hydraulic Parameters of Rough Fractures Through the Simulation of JRC Flow Channels

The hydro-mechanical response of fractured rock masses is complex, due partly to the presence of fractures at different scales. Surface morphology has a significant influence on fluid flow behaviour of a fracture. Different empirical correlations and statistical models have been proposed to estimate the equivalent hydraulic aperture and determine the pressure drop along a fracture. However, the existing models suffer from not being adequately generalised to be applicable to a wide range of real fracture surfaces. To incorporate the effect of profile roughness in the hydro-mechanical behaviour of fractured rock masses, the joint roughness coefficient (JRC) is the most widely used empirical approach. However, the average JRC of two fracture walls in fluid flow analysis, as is a common practice, appears to be inappropriate. It will be shown how different combinations of pairs of JRCs could lead to a similar JRC value. Also, changing the position of the top and bottom walls of a fracture can significantly change the hydraulic response of the fracture while the average JRC is identical in both cases. In this paper, correlations are developed which are based on the simulation of JRCs using estimated fluid flow parameters of 2D fractures can be estimated. In order to widen the application range of the correlations, JRC flow channels were generated: these are 2D channels with their top and bottom walls being made from two of the JRC profiles. To estimate the JRC of linear profiles, a correlation developed between JRC and a newly developed Riemannian roughness parameter, D _R1, is proposed. Considering ten JRC profiles, a total of 100 JRC flow channels were generated. In order to only investigate the effect of surface roughness on fluid flow, the minimum closure between the top and bottom walls of JRC flow channels were considered to be constant. Three cases with minimum closures of 0.01, 0.05 and 0.10 cm were considered in this study. All JRC flow channels were subjected to fluid analysis using FLUENT software. Based on these results, correlations were developed between the geometrical and hydraulic properties of flow channels. Analysis of several real fractures demonstrated the applicability of these correlations.