The application of auto-temperature-controlled ventilation embankment in Qinghai-Tibet Railway

Auto-temperature-controlled ventilation embankment is an effective engineering measure for “cooling roadbed”. Practice proves that this new method can sufficiently make use of natural cold energy. It has the advantages of higher efficiency, better cooling effect and feasibility in engineering practice, and wider application in various environment, etc. And also, it is comparatively cheap in project cost. Through practice in the field for half a year, the testing results show that, with the application of auto-temperature-controlled system, the artificial permafrost table has been raised by 65 cm. The artificial permafrost table was basically at the embankment bottom, and the action of freeze-thaw circle on engineering stability was effectively avoided. In the month with highest ground temperature, in the scope with 1–4 m in depth, including the majority of the embankment and the upper part in the original seasonal layer, the ground temperature decreased by 0.7°C. Through thermal flux calculation in the original seasonal layer, in the month with the maximum thermal flux coming into permafrost, it is found that the thermal flux reduces nearly by half. Coming into the cooling period for nearly a month, the ground temperature in entire auto-temperature-controlled embankment is close to zero, and the foundation is at negative temperature. But in a large region in the embankment and foundation the ground temperature was over 0°C and varied from 0°C to0.39°C in ordinary ventilation embankment.     

Physicochemistry and Mineralogy of Storm Dust and Dust Sediment in Northern China

Dust sediments collected from 1995 to 1998 in Beijing, Dunhuang, Inner Mongolia, Kashi, the Kunlun Mountains, Lanzhou, Ningxia, the Taklimakan Desert, and Xi‘an, China, were characterized in terms of their physical, chemical, and mineralogical properties. Most aerosols and dust analysed ranged in texture from silty clay to clay loam. Their median particle diameters (Mds) generally ranged between 5 to 63μm,coinciding with those of loess from central China and the finest sand from northwestern China. The dust sediments were characterized by a predominance of SiO2 and Al2O3, followed by K2O. Their SiO2/Al2O3and K2O/SiO2 molar ratios ranged from 5.17 to 8.43 and from 0.009 to 0.0368, respectively. The mass concentration spectrum during a dust storm showed a single peak, rather than the triple peak generally observed under clear sky conditions. The dominant minerals were chlorite, illite, calcite, and dolomite.These physical, chemical, and mineralogical properties were consistent with those of aeolian soils and loess in western and central China. The results suggest that aerosols and fine-gained fractions of dust sediments collected in northern China are mainly composed of soil material transported from the arid and semiarid regions of China and Mongolia by prevailing winds. The rate of deposition and properties of dust falling on eastern China were strongly influenced by meteorological conditions, season, latitude, longitude, and altitude of the sampling sites.     

Land cover dynamics in Garhwal Himalayas — a case study of balkhila sub-watershed

The present paper focuses on land cover dynamics pattern in Balkhila sub-watershed situated in Garhwal Himalayas. This study contributes example from human shaped ecosystem in mountainous regions where fragmentation of natural resources is active. The remote sensing and GIS has been used to understand the land cover dynamics along the topography. The results report that the land cover dynamics is dependent on the aspect due to sun illumination. The altitude and slope are no more a barrier for resource extraction and the human activity zone is shifting towards higher altitudes and slopes. The changes are also defined along the road and settlements.     

An automated seamless mosaicing system of multi-charge coupled devices of panchromatic data

Panchromatic data of pixel resolution 5.8 m obtained from IRS-1C and IRS-1D satellites proved to be very useful for mapping purposes. One of the popular data product is the 70 km swath mosaic which is covered by a combination of 3 CCD line sensors, each with 4096 pixels. Each CCD-line sensor with different imaging times causes geometric problems of mosaicing three strips data together. In this paper, we propose the details of the design elements of system that caters to the need for accurate and automatic multi strip image registration without any second resampling of the data. The systematic geometric correction grid mapping is improved to facilitate accurate mosaicing by automatic image registration task that makes use of the overlap data within image strips and image registration is achieved up to sub-pixel level.     

Narrowband vegetation indexes and detection of disease damage in soybeans

A portable narrowband spectroradiometer was used to detect sclerotinia stem rot infection, caused by the fungus Sclerotinia sclerotiorum in soybeans. Increasing levels of fungal inoculum were used to cause a gradient of disease infection in the field. Canopy reflectance measured in narrowband R/sub 675/-R/sub 685/ and broadband R/sub 635/-R/sub 685/ could estimate 86% of the variation in soybean plants damage measured by a count of early dead plants. Plant damage was also associated with the chlorophyll absorption in reflectance and the normalized pigment chlorophyll vegetation indexes, showing a loss of chlorophyll pigment compared to healthy plants. A new field approach is suggested for the investigation of plant damage with narrowband spectroradiometry.     

Hydro-thermal performance of multilayer capillary barriers in arid lands

In this study, a capillary barrier system was designed and tested for an arid land environment. To simulate arid land conditions of high temperature and sub-irrigation systems, the barrier was subjected to thermal and hydraulic gradients in opposite directions; to test the barrier system under these severe conditions, an experimental apparatus was designed and fabricated. The multilayer capillary barrier consisted of three layers made of silica sand, a mixture of sand and bentonite in equal portions, and a mixture of clay (25%) and aggregate (75%). Several one dimensional coupled heat and moisture tests were performed. Temperature variations along the thickness of the barrier were recorded as a function of time, and at the end of each test, the barrier was sliced into small sections, for the determination of volumetric water content as a function of distance from the heat source. The experimental results were discussed in view of the barrier's intended purpose of its ability to store moisture for long time durations. Coupled heat and moisture flow equations were developed and solved numerically via a finite difference method. Diffusivity parameters were calculated by using experimental results, a numerical model, and Powell's conjugate directions method of nonlinear optimization. The model was calibrated and the results were discussed. Good agreement between calculated and experimental results was obtained. This revised version was published online in July 2006 with corrections to the Cover Date.     

Isotope provinces, mechanisms of generation and sources of the continental crust in the Central Asian mobile belt: geological and isotopic evidence

The available geological, geochronological and isotopic data on the felsic magmatic and related rocks from South Siberia, Transbaikalia and Mongolia are summarized to improve our understanding of the mechanisms and processes of the Phanerozoic crustal growth in the Central Asian mobile belt (CAMB). The following isotope provinces have been recognised: ‘Precambrian’ (T_DM=3.3–2.9 and 2.5–0.9 Ga) at the microcontinental blocks, ‘Caledonian’ (T_DM=1.1–0.55 Ga), ‘Hercynian’ (T_DM=0.8–0.5 Ma) and ‘Indosinian’ (T_DM=0.3 Ga) that coincide with coeval tectonic zones and formed at 570–475, 420–320 and 310–220 Ma. Continental crust of the microcontinents is underlain by, or intermixed with, ‘juvenile’ crust as evidenced by its isotopic heterogeneity. The continental crust of the Caledonian, Hercynian and Indosinian provinces is isotopically homogeneous and was produced from respective juvenile sources with addition of old crustal material in the island arcs or active continental margin environments. The crustal growth in the CAMB had episodic character and important crust-forming events took place in the Phanerozoic. Formation of the CAMB was connected with break up of the Rodinia supercontinent in consequence of creation of the South-Pacific hot superplume. Intraplate magmatism preceding and accompanying permanently other magmatic activity in the CAMB was caused by influence of the long-term South-Pacific plume or the Asian plume damping since the Devonian.     

Quasi-simultaneous VLBI and RATAN-600 observations of active galactic nuclei

VLBI observations of several quasars and BL Lacertae objects were carried out at 1.66 GHz in November–December 1999 using six antennas (Medvezh'i Ozera, Svetloe, Pushchino, Noto, HartRAO, and Shanghai). Maps of six sources (0420+022, 0420-014, 1308+326, 1345+125, 1803+784, and DA 193) obtained with milliarcsecond resolution are presented and discussed, together with their broad-band (1–22 GHz) spectra obtained on the RATAN-600 radio telescope at epochs close to those of the VLBI observations. Comparison of the VLBI maps with maps of these sources obtained on standard VLBI networks and with the RATAN-600 quasisimultaneous total-flux measurements indicates the reliability of the results obtained on this Low Frequency VLBI Network and the good efficiency of this network.     

An experimental study of phase equilibria in the systems H2O–CO2–CaCl2 and H2O–CO2–NaCl at high pressures and temperatures (500–800?°C, 0.5–0.9?GPa): geological and geophysical applications

Phase equilibria in the ternary systems H₂O–CO₂–NaCl and H₂O–CO₂–CaCl₂ have been determined from the study of synthetic fluid inclusions in quartz at 500 and 800 °C, 0.5 and 0.9 GPa. The crystallographic control on rates of quartz overgrowth on synthetic quartz crystals was exploited to prevent trapping of fluid inclusions prior to attainment of run conditions. Two types of fluid inclusion were found with different density or CO₂ homogenisation temperature (T_h(CO₂)): a CO₂-rich phase with low T_h(CO₂), and a brine with relatively high T_h(CO₂). The density of CO₂ was calibrated using inclusions in the binary system H₂O–CO₂. Mass balance calculations constrain tie lines and the miscibility gap between brines and CO₂-rich fluids in the H₂O–CO₂–NaCl and H₂O–CO₂–CaCl₂ systems at 500 and 800 °C, and 0.5 and 0.9 GPa. The miscibility gap in the CaCl₂ system is larger than in the NaCl system, and solubilities of CO₂ are smaller. CaCl₂ demonstrates a larger salting-out effect than NaCl at the same P–T conditions. In ternary systems, homogeneous fluids are H₂O-rich and of extremely low salinity, but at medium to high concentrations of salts and non-polar gases fluids are unlikely to be homogeneous. The two-phase state of crustal fluids should be common. For low fluid-rock ratios the cation compositions of crustal fluids are buffered by major crustal minerals: feldspars and micas in pelites and granitic rocks, calcite (dolomite) in carbonates, and pyroxenes and amphiboles in metabasites. Fluids in pelitic and granitic rocks are Na-K rich, while for carbonate and metabasic rocks fluids are Ca-Mg-Fe rich. On lithological boundaries between silicate and carbonate rocks, or between pelites and metabasites, diffusive cation exchange of the salt components of the fluid will cause the surfaces of immiscibility to intersect, leading to unmixing in the fluid phase. Dispersion of acoustic energy at critical conditions of the fluid may amplify seismic reflections that result from different fluid densities on lithological boundaries.Editorial responsibility: I. Parsons     

Pulsating evershed flows and propagating waves in a sunspot

A comparative analysis of oscillatory spectra based on 66 time series for 14 active regions observed in 2001 shows that, although the chromospheric and photospheric oscillations in the Evershed flow zone possess many common features, there is no firm evidence that the direct and inverse flows have the same physical origin. The interactions between the various oscillation modes and stationary flows results in a complex pattern of wave motions in a sunspot. We studied the Doppler-velocity variations in the sunspot NOAA 0051 during its motion over the disk. The spatial-temporal distribution of the line-of-sight velocity in the chromospheric umbra displays a chevron structure, clearly indicating the presence of propagating waves. These waves move from the center of the umbra to outer regions with a phase speed of 45–60 km/s, a period of 2.8 min, and a measured Doppler speed of 2 km/s. The amplitude of these oscillations decreases abruptly at the boundary between the umbra and penumbra, and the observed waves are not directly related to propagating penumbral waves. Furthermore, the observed pattern of the photospheric velocities shows periodic motions (with a period of 5 min) directed from the inner boundary of the penumbra and superpenumbra toward the line of maximum Evershed velocity.