Potassium–Argon Ages of the Epithermal Gold–Silver Mineralization in the Haenam–Jindo Area,Southwestern Korea

The Haenam–Jindo area, located on the southwestern margin of the Korean Peninsula, was the site of vigorous volcanic activity during the Late Cretaceous and Early Tertiary periods. Large parts of the area record strong hydrothermal alteration, and there exist many clay–alunite and gold–silver deposits. We undertook potassium–argon (K–Ar) age dating of five mineral samples (including adularia, sericite and alunite) from the Eunsan, Moisan and Gasado epithermal gold–silver deposits in this area. The purities of the samples were confirmed by X‐ray diffraction analysis. The K–Ar ages of adularia from the Eunsan deposit and adularia and sericite from the Moisan deposit (related to gold–silver mineralization) are 75.0 ± 1.6, 74.7 ± 1.6 and 75.1 ± 1.6 Ma, respectively. The similarity of these ages, combined with the close proximity and similar geochemical characteristics of the deposits, indicates that the mineralization occurred as part of a single hydrothermal system. The K–Ar ages of alunite at the surface and adularia at depth within the Gasado deposit are 82.2 ± 1.9 and 70.7 ± 1.9 Ma, respectively, revealing that the clay–alunite and gold–silver mineralization formed at different ages. K–Ar age data indicate that the gold–silver mineralization in this area occurred mainly at 75–70 Ma, resulting from hydrothermal activity in the Haenam–Jindo area (82–70 Ma). This is the first time that the mineralization of precious metals in Korea has been identified during this period.     

Sandstone diagenesis of the Lower Cretaceous Sindong Group, Gyeongsang Basin, southeastern Korea: Implications for compositional and paleoenvironmental controls

Abstract The Gyeongsang Basin is a non‐marine sedimentary basin formed by extensional tectonism during the Early Cretaceous in the southeastern Korean Peninsula. The sediment fill starts with the Sindong Group distributed along the western margin of the basin. It consists of three lithostratigraphic units: the Nakdong (alluvial fan), Hasandong (fluvial) and Jinju (lacustrine) formations with decreasing age. Sindong Group sandstones are classified into four petrofacies (PF) based on their detrital composition: PF‐A consists of the lower Nakdong Formation with average Q₇₃F₁₂R₁₅; PF‐B the upper Nakdong and lower Hasandong formations with Q₆₆F₁₅R₁₈; PF‐C the middle Hasandong to middle Jinju formations with Q₄₉F₂₉R₂₂; and PF‐D the upper Jinju Formation with Q₂₆F₃₄R₄₁. The variations of detrital composition influenced the diagenetic mineral assemblage in the Sindong Group sandstones. Illite and dolomite/ankerite are important diagenetic minerals in PF‐A and PF‐B, whereas calcite and chlorite are dominant diagenetic minerals in PF‐C and PF‐D. Most of the diagenetic minerals can be divided into early and late diagenetic stages of formation. Early diagenetic calcites occur mostly in PF‐C, probably controlled by arid to semiarid climatic conditions during the sandstone deposition, no early calcite being found in PF‐A and PF‐B. Late‐stage calcites are present in all Sindong Group sandstones. The calcium ions may have been derived from shale diagenesis and dissolution of early stage calcites in the Hasandong and Jinju sandstones. Illite, the only diagenetic clay mineral in PF‐A and lower PF‐B, is inferred to be a product of kaolinite transformation during deep burial, and the former presence of kaolinite is inferred from the humid paleoclimatic conditions during the deposition of the Nakdong Formation. Chlorites in PF‐C and PF‐D are interpreted to be the products of transformation of smectitic clay or of precipitation from alkaline pore water under arid to semiarid climatic conditions. The occurrence of late‐stage diagenetic minerals largely depended on the distribution of early diagenetic minerals, which was controlled initially by the sediment composition and paleoclimate.     

Two‐dimensional waveform inversion of multi‐component data in acoustic‐elastic coupled media

In order to account for the effects of elastic wave propagation in marine seismic data, we develop a waveform inversion algorithm for acoustic‐elastic media based on a frequency‐domain finite‐element modelling technique. In our algorithm we minimize residuals using the conjugate gradient method, which back‐propagates the errors using reverse time migration without directly computing the partial derivative wavefields. Unlike a purely acoustic or purely elastic inversion algorithm, the Green's function matrix for our acoustic‐elastic algorithm is asymmetric. We are nonetheless able to achieve computational efficiency using modern numerical methods. Numerical examples show that our coupled inversion algorithm produces better velocity models than a purely acoustic inversion algorithm in a wide variety of cases, including both single‐ and multi‐component data and low‐cut filtered data. We also show that our algorithm performs at least equally well on real field data gathered in the Korean continental shelf.     

Variations in the geomagnetic field strength in the 5th–3rd centuries BC in the eastern Mediterranean (according to narrowly dated ceramics)

The magnetization of ceramics from the eastern Mediterranean dated within a short period (mostly shorter than ±20 years) has been studied, which made it possible to specify the geomagnetic field variations on the time interval 5th–3rd centuries BC. The 11-year time series of the geomagnetic field strength values has been constructed. The field strength changes have been considered, which indicated that the centennial variation with a characteristic time of ～130 years (according to the obtained data) is observed on this time interval as well as during the last two millennia. The ceramic material from the Mayskaya Gora archeological site (Taman), the preparation succession of which was established based on the shape of pottery but the problem of absolute dating was not solved, has been dated.     

Jurassic synorogenic basin filling in western Korea: sedimentary response to inception of the western Circum-Pacific orogeny

This is the first sedimentologic and stratigraphic attempt to demonstrate Jurassic subduction-induced basin-filling processes in the early stage of the western Circum-Pacific orogeny. The Chungnam Basin in western Korea was filled with a Lower to Middle Jurassic nonmarine succession, the Nampo Group, whose deposition postdated the Triassic final assembly of Chinese continental blocks. The Nampo Group consists of two repeated, fining- to coarsening-upward alluvio-lacustrine sequences, separated by an interval of thick breccia–gravel progradation deposits and its related strong proximal unconformities. No temporal variation in the degree of chemical weathering, along with the predominance of coals and a tropic to subtropic paleoflora, reveals little or no climate fluctuations during deposition of the Nampo Group. The observed relationships provide a record of sedimentation most likely controlled by temporal variations of tectonically driven sediment flux. Such syntectonic sedimentation of the Chungnam Basin occurred at a convergent margin of continental-arc setting during the Daebo orogeny, synchronous with the early subduction of the western paleo-Pacific ocean that resulted in formation of an accretionary complex along the East Asian continental margin during Jurassic time. Hence, synorogenic deposition in the Chungnam Basin is interpreted as sedimentary response to subduction–accretion of the western paleo-Pacific plate.     

Behavior of marine pipelines under seismic faults

A new study investigates an unburied offshore “snaked” pipeline behavior under various types of seismic faults. The snaking of the pipeline is caused by the thermal/pressure expansion and soil friction. The snaking takes place at a certain distance from the pipeline's unrestrained end and gradually increases towards the restraint. It is shown that longitudinal seismic faults have less effect on a straight pipeline than a snaked pipeline. The new seismic analysis demonstrates that an increase of ground displacement causes a very small change in bending and longitudinal stresses. The new approach results in a safe, subsea pipeline construction and operation with a significant cost reduction.     

Scale‐dependent controls upon the fluvial export of large wood from river catchments

The annual fluvial export of large wood (LW) was monitored by local reservoir management offices in Japan. LW export per unit watershed area was relatively high in small watersheds, peaked in intermediate watersheds, and decreased in large watersheds. To explain these variations, we surveyed the amount of LW with respect to channel morphology in 78 segments (26 segments in each size class) in the Nukabira River, northern Japan. We examined the differences in LW dynamics, including its recruitment, transport, storage, and fragmentation and decay along the spectrum of watershed sizes. We found that a large proportion of LW produced by forest dynamics and hillslope processes was retained because of the narrower valley floors and lower stream power in small watersheds. The retained LW pieces may eventually be exported during debris flows. In intermediate watersheds, the volume of LW derived from hillslopes decreased substantially with reductions in the proportion of channel length bordered by hillslope margins, which potentially deliver large quantities of LW. Because these channels have lower wood piece length to channel width ratios and higher stream power, LW pieces can be transported downstream. During transport, LW pieces are further fragmented and can be more easily transported. Therefore, the fluvial export of LW is maximized in intermediate watersheds. Rivers in large watersheds, where the recruitment of LW is limited by the decreasing hillslope margins, cannot transport LW pieces because of their low stream power, and thus LW pieces accumulate at various storage sites. Although these stored LW pieces can be refloated and transported by subsequent flood events, they may also become trapped by obstacles such as logjams and standing trees on floodplains and in secondary channels, remaining there for decades and eventually decaying into fine organic particles. Thus, the fluvial export of LW pieces is low in large watersheds. Copyright © 2009 John Wiley & Sons, Ltd.     

Laboratory experiment to measure 5-MHz volume backscattering strengths from Red-tide causing microalgae Chattonella antiqua

An acoustic laboratory experiment using 5-MHz signals was conducted to measure the volume backscattering strengths of red-tide causing microalgae, Chattonella antiqua, which is one of the species of harmful algal blooms in the coastal waters of Korea and Japan. The measured backscattering strengths increased with cell abundance, with a slope of approximately 10 dB per decade increase in cell numbers. The density and sound speed ratios of the Chattonella cell to the water medium were estimated via the density gradient centrifugation method and the time-travel difference method, respectively. Finally, the measured backscattering strengths were compared to those predicted by a fluid-sphere scattering model, in which the estimated sound speed and density contrasts were used as input parameters.     

Characterizing the effect of heavy metal contamination on marine mussels using metabolomics

Marine mussels (Mytilus) are widely used as bioindicators to measure pollution in marine environments. In this study, (1)H NMR spectroscopy and multivariate statistical analyses were used to differentiate mussel groups from a heavy metal-polluted area (Onsan Bay) and a clean area (Dokdo area). Principal component analysis and orthogonal projection to latent structure-discriminant analysis revealed significant separation between extracts of mussels from Onsan Bay and from the Dokdo area. Organic osmolytes (betaine and taurine) and free amino acids (alanine, arginine, glutamine, phenylalanine, and threonine) were more highly accumulated in Onsan Bay mussels compared with Dokdo mussels. These results demonstrate that NMR-based metabolomics can be used as an efficient method for characterizing heavy metal contamination derived from polluted area compared to clean area and to identify metabolites related to environments that are contaminated with heavy metals.