Alteration of hydrologic indicators for Korean catchments under CMIP5 climate projections

The change of hydrological regimes may cause impacts on human and natural system. Therefore, investigation of hydrologic alteration induced by climate change is essential for preparing timely proper adaptation to the changes. This study employed 24 climate projections from the Coupled Model Intercomparison Project Phase 5 (CMIP5) under Representative Concentration Pathway (RCP) 4.5 scenario. The climate projections were downscaled at a station‐spacing for seven Korean catchments by a statistical downscaling method that preserves a long‐term trend in climate projections. Using an ensemble of future hydrologic projections simulated by three conceptual rainfall‐runoff models (GR4J, IHACRES, and Sacramento models), we calculated Hydrologic Alteration Factors (HAFs) to investigate degrees of variations in Indicators of Hydrologic Alteration (IHAs) derived from the hydrologic projections. The results showed that the seven catchments had similar trend in terms of the HAFs for the 24 IHAs. Given that more frequent severe floods and droughts were projected over Korean catchments, sound water supply strategies are definitely required to adapt to the alteration of streamflow. A wide range of HAFs between rainfall‐runoff models for each catchment was detected by large variations in the magnitude of HAFs with the hydrologic models and the difference could be the hydrologic prediction uncertainty. There were no‐consistent tendency in the order of HAFs between the hydrologic models. In addition, we found that the alterations of hydrologic regimes by climate change are smaller as the size of catchment is larger. Copyright © 2016 John Wiley & Sons, Ltd.     

Velocity and vorticity measurements of Jupiter's Great Red Spot using automated cloud feature tracking

We have produced mosaics of the Great Red Spot (GRS) using images taken by the Galileo spacecraft in May 2000, and have measured the winds of the GRS using an automated algorithm that does not require manual cloud tracking. Our technique yields a high-density, regular grid of wind velocity vectors that is advantageous over a limited number of scattered wind vectors that result from manual cloud tracking. The high-velocity collar of the GRS is clearly seen from our velocity vector map, and highest wind velocities are measured to be around 170 m s⁻¹. The high resolution of the mosaics has also enabled us to map turbulent eddies inside the chaotic central region of the GRS, similar to those mapped by Sada et al. [Sada, P.V., Beebe, R.F., Conrath, B.J., 1996. Icarus 119, 311-335]. Using the wind velocity measurements, we computed particle trajectories around the GRS as well as maps of relative and absolute vorticities. We have discovered a narrow ring of cyclonic vorticity that surrounds the main anti-cyclonic high-velocity collar. This narrow ring appears to correspond to a ring surrounding the GRS that is bright in 5 μm [Terrile, R.J., Beebe, R.F., 1979. Science 204, 948-951]. It appears that this cyclonic ring is not a transient feature of the GRS, as we have discovered it in a re-analysis of Galileo data taken in 1996 first analyzed by Vasavada et al. [Vasavada, A.R., and 13 colleagues, 1998. Icarus 135, 265-275]. We also calculate how absolute vorticity changes as a function of latitude along a trajectory around the GRS and compare these measurements to similar ones performed by Dowling and Ingersoll [Dowling, T.E., Ingersoll, A.P., 1988. J. Atmos. Sci. 45, 1380-1396] using Voyager data. We show no dramatic evolution in the structure of the GRS since the Voyager era except for additional evidence for a counter-rotating GRS core, an increase in velocity in the main velocity collar, and an overall decrease in the length of the GRS.     

Determination of plastic regions around underground openings by a coupled boundary-element-characteristics method

A two-dimensional hybrid method for solving elastoplastic problems in engineering is presented by coupling two existing methods, namely, the boundary element method and the characteristics method. The formulation of this method is presented, as well as an excellent procedure for the determination of the boundary between elastic and plastic regions. It is shown not only that this method is a powerful and accurate method for evaluating the shape and extent of the plastic region around rock caverns, which is of prime importance for the construction of rock caverns, but also applicable to a given range of the initial stress field ratio where only compressive failure occurs. Then, some typical examples are solved in order to check the accuracy of the solution by this method. Furthermore, its successful applications are presented and discussed to determine the shape and the extent of the plastic regions around parallel, circular and rectangular openings.     

An extended canonical perturbation method

In this investigation, a procedure is described for extending the application of canonical perturbation theories, which have been applied previously to the study of conservative systems only, to the study of non-conservative dynamical systems. The extension is obtained by imbedding then-dimensional non-conservative motion in a 2n-dimensional space can always be specified in canonical form, and, consequently, the motion can be studied by direct application of any canonical perturbation method. The disadvantage of determining a solution to the 2n-dimensional problem instead of the originaln-dimensional problem is minimized if the canonical transformation theory is used to develop the perturbation solution. As examples to illustrate the application of the method, Duffing's equation, the equation for a linear oscillator with cubic damping and the van der Pol equation are solved using the Lie-Hori perturbation algorithm.This research was supported by the Office of Naval Research under Contract N00014-67-a-0126-0013.     

First record of three barracudina fishes (Aulopiformes: Teleostei) in Korean waters

Three barracudina fishes (Paralepididae) were newly recorded from the southern sea of Korea. Lestidium prolixum is characterized by a single band of luminous ducts on the midventral line and absence of a papilla anterior to the eye. Lestrolepis intermedia and L. japonica are similar in having a black papilla immediately in front of the eye and two bands of luminous ducts on the midventral line. However, the dorsal fin of L. intermedia is located more posterior along the body than that of L. japonica, and L. intermedia have larger number of anal fin rays 42 (vs. 36–40) and vertebrae 95 (vs. 86–87) than L. japonica.     

Internal wave dispersions in density-stratified deep oceans with a thermocline

As to two typical Väisälä frequency profiles in deep oceans, one in the Arctic Ocean and one in the Atlantic, the approximate analytical method ofHyun (1976) is used to calculate internal wave dispersion relations. The method is shown to have good agreement with the matrix numerical method. By making calculations for an exemplary Väisälä frequency profile with a thermocline, an assessment is made of the inaccuracies in the dispersion curves obtained by the ordinary WKB method which does not take into account the turning point singularities.     

Variation of underwater ambient noise observed at IORS station as a pilot study

The Ieodo Ocean Research Station(IORS) is an integrated meteorological and oceanographic observation base which was constructed on the Ieodo underwater rock located at a distance of about 150 km to the south-west of the Mara-do, the southernmost island in Korea. The underwater ambient noise level observed at the IORS was similar to the results of the shallow water surrounding the Korean Peninsula (Choi et al. 2003) and was higher than that of deep ocean (Wenz 1962). The wind dependence of ambient noise was dominant at frequencies of a few kHz. The surface current dependence of ambient noise showed good correlation with the ambient noise in the frequency of 10 kHz. Especially, the shrimp sound was estimated through investigations of waveform and spectrum and its main acoustic energy was about 40 dB larger than ambient noise level at 5 kHz.     

Numerical flow simulation of flush type intake duct of waterjet

Waterjet propulsion system is widely used to thrust high speed marine vessels in excess of 30–35 knots by virtue of high propulsive efficiency, good maneuverability, and less vibration. Since, however, approximately 7–9% of the total power is lost in intake duct due to flow separation, nonuniformity, etc., detail understanding of flow phenomena occurring within intake duct is essential to reduce the power loss. The present work solved 3D incompressible RANS equations on multiblocked grid system of the flush type intake duct of waterjet. The numerical results of surface pressure distributions, velocity vectors, and streamlines were compared with experiments and good agreements were obtained for three jet velocity ratios. Strong suction flow through the inlet was shown and the vortex induced by the separation along the corner of the side wall was clearly shown. Flow separation on the lip was also observed. The location of stagnation point on the lip was well predicted, in accordance with PIV measurement.     

Assessment of acoustic iterative inverse method for bubble sizing to experimental data

Comparative study was carried out for an acoustic iterative inverse method to estimate bubble size distributions in water. Conventional bubble sizing methods consider only sound attenuation for sizing. Choi and Yoon [IEEE, 26(1), 125–130 (2001)] reported an acoustic iterative inverse method, which extracts the sound speed component from the measured sound attenuation. It can more accurately estimate the bubble size distributions in water than do the conventional methods. The estimation results of acoustic iterative inverse method were compared with other experimental data. The experimental data show good agreement with the estimation from the acoustic iterative inverse method. This iterative technique can be utilized for bubble sizing in the ocean.     

Jason-1 Precision Orbit Determination by Combining SLR and DORIS with GPS Tracking Data

With the implementation of the Jason-1 satellite altimeter mission, the goal of reaching the 1-cm level in orbit accuracy was set. To support the Precision Orbit Determination (POD) requirements, the Jason-1 spacecraft carries receivers for DORIS (Doppler Orbitography and Radiopositioning Integrated by Satellite) and GPS (Global Positioning System), as well as a retroreflector for SLR (Satellite Laser Ranging). The overall orbit accuracy for Jason will depend on the quality and the relative weighting of the available tracking data. In this study, the relative importance of the SLR, DORIS, and GPS tracking data is assessed along with the most effective parameterization for accounting for the unmodeled accelerations through the application of empirical accelerations. The optimal relative weighting for each type of tracking data was examined. It is demonstrated that GPS tracking alone is capable of supporting a radial orbit accuracy for Jason-1 at the 1-cm level, and that including SLR tracking provides additional benefits. It is also shown that the GRACE (Gravity Recovery and Climate Experiment) gravity model GGM01S provides a significant improvement in the orbit accuracy and reduction in the level of geographically correlated orbit errors.